Owner`s manual
Operations Common to Each Mode
To change display setting
1.
Press and hold the [0] button·for 1 second or
longer to switch to the adjustment selection
display.
2. Press the
[<...-,
~>]
lever upward
or
downward to select the "item name".
"CLOCK"
+-+
"SCREEN
SVR"
+-+
"MSG
INP"
+-+
"AUTO
SCROL"
+-+
"DIMMER"
+-+
"CONTRAST"
3. Turn the [ROTARY] knob to select the
"desired setting value".
*
In
the case of item names appearing with the
"E" suffix, after the item name, the
[~II
]button
must
be
pressed to display the setting value.
*After completing settings, press the [D] button
to return to the previous mode.
e Setting the clock
2-1. Select
"CLOCK
<E>".
3-1. Press the
[~II]
button.
3-2. Press the
[<...-,
~>]
lever upward or
downward to select the hour
or
the minute.
3-3. Turn the [ROTARY] knob to set the correct
time.
*The clock is displayed
in
12-hour format.
3-4. Press the
[~II]
button to store the time into
memory.
Note:
•
You
cannot
set
the
clock
when
it
is
displayed
with
only
the
ignition
on.
If
you
drain
or
remove
the
car's
battery or
take
out
this
unit,
the
clock
is
reset.
While
setting
the
clock,
ifanother
button
or
operation
is
selected,
the
clock set
mode
is
canceled.
e Turning the screen saver function on
or
off
This unit is provided with the screen saver
function which allows you to show various kinds
of
patterns and characters in the operation
status indication area of the display in a random
order.
You
can turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
*The factory default setting is "ON".
2-1. Select "SCREEN SVR".
3-1. Turn the [ROTARY] knob to select the setting.
Each time you turn the [ROTARY] knob, the
setting changes in the following order:
SS
OFF'"
SS ON
...
SSMESSAGE.
20 DXZ555MP
e Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in
memory and displayed as a type of screen
saver setting.
*The factory default setting is 'WELCOME TO
CLARION".
2-1. Select "MSG INP <E>".
3-1. Press the
[~II]
button.
3-2. Press and hold [BND] button for 1 second
or longer to clear the old message.
3-3. Press the
[<...-,
~>]
lever upward
or
downward to move the cursor.
3-4. Press the [BND] button to select a
character. Each time you press the [BND]
button, the character changes in the
following orders:
Capital letters Numbers
...
Symbols
...
Capital letters .
3-5. Turn the [ROTARY] knob to select the
desired character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the
[~II]
button for 2
seconds
or
longer to store the message in
memory and cancel input message mode.
* Press and hold the [BND] button for 1second
or longer to cancel the input message. Then
press and hold the
[~II
]button for 2 seconds
or longer to store the message and the
message return to default setting.
e Setting the method
for
title scroll
Set how to scroll in CD-TEXT, MP3IWMA title.
*The factory default setting
is
"ON".
2-1. Select "AUTO
SCROL".
3-1. Turn the [ROTARY] knob to select "ON"
or
"OFF".
• ON:
To
scroll automatically.
• OFF:
To
scroll just 1 time when the title was
changed
or
the [T] button was pressed for
1 second or longer.
e Dimmer control
You
can setting the dimmer control "ON"
or
"OFF".
*The factory default setting
is
"ON".
2-1. Select "DIMMER".
3-1. Turn the [ROTARY] knob to select "ON"
or
"OFF".