DXZSSSMP CD/MP3/WMA Receiver I CeNET Control • Recepteur CD/MP3/WMA / Commande CeNET • Reproductor de discos CD/MP3/WMA con receptor y control CeNET ~NET ffi]D~~ DIGITAL AUDIO I TEXT I SIRIUsiJ REA D Y I _.p .
Thank you for purchasing this Clarion product. * Please read this owner's manual in its entirety before operating this equipment. * After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). * Check the contents of the enclosed warranty card and keep it carefully with this manual. * This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable.
1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.
Flip Down Panel This unit uses a flip-down structure that makes possible large-size displays. When opening and closing the FLIP DOWN PANEL, be careful not to catch your fingers. They could be injured. 1. Always use this unit with the FLIP DOWN PANEL closed. 4. When closing the FLIP DOWN PANEL, do not press the [OPEN] button. 5. Strong impacts to the operating or display section can cause damage or deformation. 6. If the FLIP DOWN PANEL does not open fully, gently open it with your hand. 2.
Source unit I AppareiJ pilote / Unidad fuente ~~-[Z+] l.......-~~[T] [ADJ] --;--~- With the FLIP DOWN PANEL opened / Ouvrez Ie PANNEAU RABATTABLE Apertura del PANEL ABATIBLE [~] [CD SLOT] Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veui/fez deplier cette page et l/OUS referer aux schemas quanti vous Jisez chaque chap/tre. Nota: Cuando lea los capftulos, despliegue esta pagina y consulte los diagramas.
Note: • Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold). Names of the Buttons and their Functions [OPEN] button [P.LIST] button • Deeply push in [OPEN] button to unlock the flip down panel. • Press and hold for 1 second or longer to turn on or off the play list mode. (MP3IWMA disc only) [~II] button • Play or pause a CD while in the CD/MP3/ WMAmode. • Perform preset scan while in the radio mode.
Major button operations when external equipment is connected to this unit • When the CD/DVD changer is connected * For details, see the section "CD changer operations". For the DVD changer, refer to the Owner's Manual provided with the DVD changer. [~II] button • Play or pause a CD or DVD. [0] button • Press the button to display the title. • Press and hold the button for 1 second or longer to enter the display adjust mode. [T] button • Press the button switches the user titles or track titles, etc.
Display Items Operation status indication Titles, frequency, PS names, clock, etc. are displayed.
_,--. The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. Be sure to close the HOLD FLAP for safety when removing the DCP. We recommend taking the DCP with you when leaving the car. Attaching the DCP Removing the DCP 1. Press the [SRC] button for 1 second or longer to turn off the power. ...... 1. Insert the right side of the DCP into the main unit. 2.
Signal transmitter [SRC] [BND] [ ~II ] [!], [,] [<~], [~>] [MUTE] [ISRlj III I I II [SCN] [DISP] [ROM] [RPT] clarion • WIRELESS REMOTE CONTROLLER • 0 0 Inserting the Battery CD Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. ® Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards. ® Press the battery in the direction indicated by the arrow so that it slides into the compartment.
Functions of Remote Control Unit Buttons Switches among radio, SIRIUS tuner, CD/MP3IWMA, CD changer, DVD changer, TV and AUX. [BND] Switches reception band. Plays the fi rst track. Top play. Moves the next disc in increasing order. Switches reception band. [. .] ,[T] Increases and decreases volume (in all modes). [<] Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward. Moves preset channels up and down.
Note:Be sure to read this chapter referring to the front diagrams of chapter li3. CONTROLS" on page 5 (unfold). Adjusting the volume Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Basic Operations Adjusting the Z-Enhancer Plus 1. Press the [Z+] button and select the ZEnhancer Plus mode to adjust. 2. Press the [A-M] button and turning the [ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the - direction. • When "B-BOOST 0" selected, you can adjust the bass in the range of -3 to 3. .When "IMPACT 0" selected, you can adjust the bass and treble in the range of -3 to 3. .
Basic Operations Radio Operations Adjusting the fader Listening to the radio 1. Press the [A-M] button and select "FAD 0". 2. Turning the [ROTARY] knob clockwise 1. Press the [SRC] button and select the radio mode. The frequency appears in the display. emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. * The factory default setting is "FAD 0". (Adjustment range: F12 to R12) 3.
Radio Operations Recalling a preset station Instant station recall (ISR) A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes. 1.
CDIMP31WMA Operations MP31WMA What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality. This means that about 10 music CDs can be recorded on a CDR disc or CD-RW disc to allow a long listening time without having to change CDs.
CDIMP31WMA Operations ~ ISC Set to CD Set to MP3IWMA Mixed with CD and Play CD Play MP3IWMA MP3IWMA type tracks Play CD CD type track only Play CD MP3IWMA type track only Play MP3IWMA Play MP3IWMA 2. After making these settings, remove the disc and then reinsert it. 3. When a mixed mode CD is loaded and CD is set, the track to be played first is MP3IWMA file data and no sound is heard. Note: • When playing a CCCD (Copy Control CD), set the setting to CD type.
CDIMP31WMA Operations Displaying CD titles Folder Select This unit can display title data for CD-textlMP3/ WMA disc and user titles input with this unit. This function allows you to select a folder containing MP3IWMA files and start playing from the first track in the folder. 1. Press the [0] button to display the title. 2. Each time you press the [T] button, the title display changes in the following order: • CD-TEXT disc User title (disc) ... CD-text title (disc) ...
CDIMP31WMA Operations The indications "ALL···" and "SeN" light in the display. * Folder scan play starts from the next track after the track currently being played. 3. Press the [ON] button to move to the previous play list. Press the [UP] button to move to the next play list. e Repeat play Notes: This function allows you to play the current track repeatedly. • The SCN/RPT/RDM functions cannot be used while in the play list mode. • The title display changes from folder name to play list name. 1.
Operations Common to Each Mode To change display setting e Entering MESSAGE INFORMATION 1. Press and hold the [0] button·for 1 second or longer to switch to the adjustment selection display. Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting. * The factory default setting is 'WELCOME TO CLARION". [<...-, 2. Press the ~>] lever upward or downward to select the "item name".
Operations Common to Each Mode e Adjusting the display contrast e Performing a system check You can adjust the display contrast to match the angle of installation of the unit. This function allows you to perform a system check from the adjust mode when required. * The factory default setting is "5". 2-1. Select "SYS CHK ". 2-1. Select "CONTRAST". 3-1. Press and hold the [~II] button for 1 second or longer. 3-1. Turn the [ROTARY] knob to select from 1-8.
Operations Common to Each Mode Clearing titles 1. Select and playa CD in the CD changer or tune in to a TV station or TUNER for which you want to clear the title. 2. Press the [0] button and display the title display. 3. Press and hold the [1] button for 1 second or longer. The display switches to the title input display. 4. Press and hold the [BND] button for 1 second or longer. All characters in the title disappear. 5.
CD Changer Operations TV Operations Procedure to scroll a title Note: Set "SCROLL" to "ON" or "OFF". • The following operations are performed the same as for radio mode: (The factory default setting is "ON". Refer to the subsection "Turning the screen saver function on or off" in section "Operation common to each mode".) e When set to "ON" The title is automatically kept scrolling.
Power does not turn on. (No sound is produced.) Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power, then press the [OPEN] button and remove the DCP.
If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck's mechanism and consult your store of purchase. A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. A CD is loaded upside-down inside the CD deck and does not play. Eject the disc then reload it properly. A CD inside the CD changer is not loaded.
FMTuner Audio Frequency Range: 87.9 MHz to 107.9 MHz Maximum Power Output: 212W(53WX 4ch) Usable Sensitivity: 9 dBf Continuous Average Power Output: 18 W X 4, into 4 Q, 20 Hz to 20 kHz, 1% THD 50dB Quieting Sensitivity: 15 dBf Bass Control Action (50 Hz/80 Hz/120 Hz): +16 dB, -12dB Alternate Channel Selectivity: 70 dB Treble Control Action (8 kHz/12 kHz): ±12 dB Stereo Separation (1 kHz): 35 dB Line Output Level (CD 1 kHz): 1.
Clarion Co., Ltd. 2004/12 All Rights Reserved. Copyright © 2004: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China 284-0120-00 2004/12 Installation/Wire Connection Guide Manuel d’installation et de connexion Guía de instalación/conexión de cables English Français Español 1. BEFORE STARTING / PRÉPARATIFS / ANTES DE COMENZAR 1. This set is exclusively for use in cars with a negative ground, 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery “-” terminal before starting.
■ PRECAUTION ■ PRECAUCION ■ `Précaution 1. Remove the screw from the source unit (Figure 5). 1. Quite el tornillo de la unidad de la fuente (Figura 5). 1. Retier la vis du module source (Figure 5). 2. Remove the stopper from the source unit (Figure 6). 2. Quite el tapón de la unidad de la fuente (Figura 6). 2. Retirer la languette du module source (Figure 6). 3. Install the remove screw to the source unit (Figure 7). 3. Instale el tornillo retirado de la unidad de la fuente (Figura 7). 3.
English Français Español 6.
English Français Español 7. SYSTEM EXAMPLE/EXEMPLE DE SYSTEME/EJEMPLO DESISTEMA ■ Example of the system using an external amplifier (Audio Visual) ■ Exemple de système utilisant un amplificateur extérieur. (audio-visuel) ■ Ejemplo de sistema utilizando un amplificador externo (audiovisual) ■ DXZ555MP 0 ! @ 6 * 2 1 6 $ # 7 3 % 4 5 Amp Amp ¥ & 8 9 Note: Use a CeNET extension cable that is less than 20 m in length. (including the Y-adapter CCA-519.
281-0624-00 2003/8 I Clarion CLARION LIMITED WARRANTY For USA and Canada only If purchased from an authorized Clarion dealer, this product is warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase. Clarion ProAudio products, except for speakers, are covered by a two (2) year limited warranty when purchased from and installed by an authorized Clarion dealer.
