Owner's manual Mode d'emploi Manual de instrucciones DXZ385US8 CD/USB/MP3IWMAlAAC RECEIVER WITH CeNET CONTROL AUTORADIO CD/USB/MP3IWMAlAAC I AVEC COMMANDE CeNET RECEPTOR CD/USB/MP3IWMAlAAC CON CONTROL CeNET
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We are confident that you'll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website. The registration form is short and easy to complete.
1.FEATURES IAACI IUS~tHI . RI?~ rB!fINET ~ 'R'A~IO-' REA D Y ID3TAG IQl Madefor @J iPod • USB Audio for iPod® • USB Digital Media Streaming Capability • Built-in LPF/HPF * "iPod" is for legal or rightholder-authorized copying only. Don't steal music. "iPod" is a trademark of Apple Inc., registered in the U.S. and other countries. * XM and the XM logos are trademarks of XM Satellite Radio Inc. 2. PRECAUTIONS 1.
Handling Compact Discs Use only compact discs bearing the [Q]D~© or ffilm mark. DIOITALAUDIO Storage ~ • Do not expose compact discs to direct sunlight or any heat source. Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R/CD-RW mode may not be usable. • Do not expose compact discs to excess humidity or dust. • Do not expose compact discs to direct heat from heaters.
3. CONTROLS Names of the Buttons and Their Functions [:-~~]---..... [RELEASE] .-T"- [-,j, [T] ~(::;(~fD~~ [USB SLOT] [~] (EJECT)-7-~ &IlJlt.-.;.:.;..-..;;- ~~J) [AUX] L..-_ [SOUND] L..-_ [DIRECT] L..--[RDM] L..--[RPT] L..--[SCN] [RELEASE] button [SOUND] button • Press the [RELEASE] button to unlock the DCP. • Use the button to switch to the sound adjust mode. [rNI~] • Press and hold the button for 1 second or longer to turn on or off the MAGNA BASS EXTEND mode.
Names of the Buttons and Their Functions [SCN] button [SRC] button • Perform scan play for 10 seconds of each track while in the CD/MP3/wMAlAAC mode. • Press and hold the button for 1 second or longer to perform folder scan play while in the MP3/wMAlAAC mode. • Press the button to turn on the power. • Press and hold the button for 1 second or longer to turn off the power. • Switch the operation mode among the radio mode, etc. [ISR] button [~], [~] • RecalliSR radio station in memory.
Display Items Operation status indication Source, titles, frequency, setting, clock, etc. are displayed. ...... .. •...• .... .,:: .... ,:: .... . ••••• ..... ...... ... .. ...... lIn: :::,:.::n:. • ••• pI,. , .:.... .:.... :~ :~ ~: ~.:~ ••••• ••••• ~ ~ ~. ~ •••••••••• lIn: •••••••••• ,.,., ,.,., ,. ,., ~: :~ ~ ~: :~ ~: :~ ~ ••• ~ DISC ..\~\. ,.,., ,.,., ,.,., • ••• ,., • .•.
4. DCP (DETACHABLE CONTROL PANEL) The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Storing the DCP in the DCP Case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation. ) Removing the DCP 1.
5. REMOTE CONTROL Functions of Remote Control Unit Buttons * Some buttons on the remote control unit have different functions from the corresponding buttons on the main unit. [!J, [T] II ~':'l':'~~~ [MUTE] --=+-11---'~R @:"'-;':--[DISPl [ISR] J ( II ~ ~Si? [SeN] ~ [ROM] ~'---r+---[RPT] clarion • Shared modes • Radio/Satellite Radio modes [SRC] button [BND] button • Press the button to turn on the power. Press and hold the button for 1 second or longer to turn off the power.
Functions of Remote Control Unit Buttons [~II] • iPod mode button • Switches between playback and pause. [SeN] button • Press to perform scan play. • When in MP3IWMAlAAC and USB/MTP modes, press and hold the button for 1 second or longer to perform folder scan play. [RPT] button • Press to perform repeat play. • When in MP3IWMAlAAC and USB/MTP modes, press and hold the button for 1 second or longer to perform folder repeat play. [ROM] button • Press to perform random play.
Inserting the Battery CD Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. ® Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards. ® Press the battery in the direction indicated by the arrow so that it slides into the compartment. @ Replace the cover and slide in until it clicks into place.
6. OPERATIONS Note: • Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 6. Basic Operations Selecting a mode Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Basic Operations Sound Adjustment You can adjust a sound effect or tone quality to your preference. To change sound setting 1. Press the [SOUND] button to switch to the sound adjustment selection display. * The factory default sound setting is "ZEHCR". 2. Then press the [~....] or [~] button to select the sound adjustment mode.
Basic Operations • Adjusting the treble This adjustment can be performed only when the Z-Enhancer Plus is set to "CUSTOM ". 2-1. Select "TREBLE". 3-1. Press the L6.] or [T] button to .select as following order. "TREB" ~ ''TREB'' * The factory default setting is ''TREB''. 3-2. Press the [:-J~] button. 3-3. Press the L6.] or [T] button to adjust the gain, the F (center frequency) and the Q. TREB:The factory default setting is "0".
Radio Operations Listening to the radio • Quick tuning 1. Press the [SRC] button and select the radio mode. The frequency appears in the display. Press and hold the [~] or [~] button for 1 second or longer to tune in a station. 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: • Step tuning F1 (FM1) ~ F2 (FM2) ~ F3 (FM3) ~ AM ~ F1 (FM1 )... 3. Press the [~] or [~] button to tune in the desired station.
Radio Operations Preset scan Instant station recall (lSR) Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes. elSR memory 1. Select the station that you wish to store in ISR memory. 2.
CDIMP31WMAIAAC Operations MP31WMAIAAC What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs.
CDIMP31WMAIAAC Operations • Logical format (File system) 1. When writing MP3IWMAJAAC file on a CD-R disc or CD-RW disc, please select "IS09660 level 1, 2 or JOLIET or Romeo" or APPLE ISO as the writing software format. Normal play may not be possible if the disc is recorded on another format. 2. The folder name and file name can be displayed as the title during MP3IWMAJAAC play but the title must be within 64 single byte alphabetical letters and numerals (including an extension). 3.
CDIMP31WMAIAAC Operations Listening to a disc already loaded in the unit Displaying CD titles When the unit enters the CD/MP3/wMAlAAC mode, play starts automatically. This unit can display title data for CD-text/MP3/ WMAlAAC disc and user titles input with this unit. 1. Each time you press the [DISP] button to change the title display. If there is no disc loaded, the indication "NO DISC" appears in the title display. • CD-TEXT disc User'" Track'" Disc'" Artist ... User ...
CDIMP31WMAIAAC Operations Folder Select • Folder repeat play This function allows you to select a folder containing MP3IWMAlAAC files and start playing from the first track in the folder. 1. Press the [T] or [£.] button. Press the [£.] button to move the next folder. Press the [T] button to move the previous folder. 2. To select a track, press the [........] or [~] button. This function allows you to playa track currently being played in the MP3IWMAlAAC folder repeatedly. 1.
Operations Common to Each Mode To change adjustment setting 1. Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [~] or [~] button to select the "item name". "CLOCK" ~ "SETIINGS" ~ "SCRN SVR" +---+ "MSG INP" +---+ "SCROLL" +--+ "DIMMER" ~ "A-CANCEL" +--+ 'TEL-SP" +---+ "TELSW" +--+ "S-CHECK" 3. Press the [.] or [T] button to select the "desired setting value".
Operations Common to Each Mode • Entering message information • Setting the dimmer control Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting. You can set the dimmer control "ON" or "OFF". * The factory default setting is "ON". 2-1. Select "DIMMER". * The factory default setting is "WELCOME TO CLARION". 2-1. Select "MSG INP". 3-1. Press the [:-~n button. 3-2. Press and hold the [BND] button for 1 second or longer to clear the old message. 3-3.
Operations Common to Each Mode • Cellular phone interrupt setting Entering titles If you connect this unit and your cellular phone with a separately sold cable, you can listen to your telephone calls on your car speakers. * The factory default setting is "OFF". 2-1. Select "TEL-SW". 3-1. Press the L.A.] or [T] button to select the setting. Each time you press the [.
Operations Common to Each Mode Clearing titles 1. Select and playa CD in the CD changer or tune in to a TV station or Radio for which you want to clear the title. 2. Press and hold the [DISP] button for 1 second or longer. 3. Press the [~] or [~] button to select "TITLE IN". 4. Press the [~~~] button. The display switches to the title input display. 5. Press and hold the [BND] button for 1 second or longer. All characters in the title disappear. 6.
7. ACCESSORIES USBIMTP Operations USB memorylMTP device operation Note: • The following operations are the same as for CD mode: *Pause * Track selection *Fast-forwardlfast-backward (Except DRM file) *Top function *Scan play *Repeat play *Random play *Folder selection See "CDIMP3IWMAlAAC Operations" (page 1821) for details. About USB memory • USB is an acronym for Universal Serial Bus, and refers to an external bus standard supporting data transfer rates of 12 Mbps. • This unit is compatible with USB 1.
USBIMTP Operations Connecting a USB memorylMTP device To listen to tracks on a connected USB memorylMTP device 1. Connect the USB memory/MTP device to the USB slot. 1. Press the [SRC] button to switch the source. When USB memory/MTP device is selected, playback (except DRM files) will begin from the location at which playback was previously stopped. * When a USB memory/MTP device is connected the USB/MTP mode will be displayed.
iPod Operations This section describes operations when connected to an Apple iPod via the USB slot. Notes: • See the iPod Owner's Manual for details regarding operation conditions. • The unit will not operate, or may operate improperly with unsupported versions. • For a list of compatible Apple iPod unit with the this model, please contact your Clarion dealer or www.clarion.com.
iPod Operations Selecting category from the iPod menu Selecting category using preset memory 1. Press and hold the [BND] button for 1 second or longer to select the iPod menu mode. The iPod menu categories will be displayed. 1. Press and hold the [BND] button for 1 second or longer to select the iPod menu mode. The category can be set as follows in the [DIRECT] (1-6) buttons. [1] : PLAVLlST Notes: • Repeat and Random mode operations are not supported when in the iPod menu mode.
Satellite Radio Operations This function is available when a Satellite Radio Receiver is connected through the CeNET cable. This unit can control the following satellite radio receivers: • XM Satellite Interface Adapter (Mini-Tuner Included) : CNP2000UC Clarion cable for CNP2000UC : CNPCLA1 • SIRIUS Satellite Radio Receiver: SIRCL3 • SIRIUS Satellite Translator Adapter: CLA-SC1 (which needs Sirius universal Tuner sold separately.
Satellite Radio Operations Recalling a preset station Presetting a category A total of 18 satellite radio stations can be stored. A category can be preset by registering specific categories in [DIRECT] buttons 1 to 6. Then the desired category can be recalled by pressing the corresponding [DIRECT] button. 1. Press and hold the [BND] button for 1 second or longer to enter the category mode. 2. Press the L...] or [..-] button to select a category. 3.
CD Changer Operations Note: • The following operations are the same as for CD mode: *Pause * Track selection *Fast·forwardlfast·backward *Scan play *Repeat play *Random play See "CDIMP3IWMAIAAC Operations" (page 1821) for details. CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [SRC] button and select the CD changer mode to start play.
DVD Changer Operations By connecting an optional DVD changer that supports CeNET wiring, this unit can be used to control the DVD changer. To view DVDs, an optional monitor is required. • The DVD control and display functions supported by this unit are limited; the unit does not support all the functions possible on a DVD changer. For fullest functionality, use the remote control unit provided with your DVD changer to control its operations.
8. TROUBLESHOOTING Power does not turn on. (No sound is produced.) No sound output when operating , the unit with ;-;! amplifiers or : power antenna attached. Nothing happens when buttons are pressed. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2.
The device contains no MP31 Record MP3IWMAlAAC files properly to the device. WMAlAAC files. The files are not proper MP31 Use only properly encoded MP3IWMAlAAC files. WMAIAAC format. Connectors are loose. Disconnect the device and reconnect securely. Sound is The MP3IWMAlAAC files are Use only properly encoded MP3IWMAlAAC files. interrupted or has improperly encoded. noise. The device isn't recognized. The device is damaged. Disconnect the device and reconnect.
9. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. A CD is caught inside the CD This is a failure of CD deck's mechanism and consult your store of purchase. deck and is not ejected. A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. A CD is loaded upside-down Eject the disc then reload it properly. inside the CD deck and does not play.
10. SPECIFICATIONS FM Tuner General Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 11 dB~V 50dB Quieting Sensitivity: 17 dB~V Alternate Channel Selectivity: 60 dB Stereo Separation (1 kHz): 30 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative ground Current Consumption: Less than 15 A Speaker Impedance: 4 n (4 n to 8 n allowable) Auto Antenna Rated Current: 500 mA or less Weight / Source unit: 2.53 lb. (1.
11.0THERS WMDRM 10 for devices • This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. • Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property, including copyrights. This device uses WMDRM software to access WMDRM-protected content.
Clarion Co., Ltd. 2007/12 All Rights Reserved. Copyright © 2007: Clarion Co., Ltd.
Printed in China/l'l1p,ine en CllIne/lmpre_s_o_en_C_h_in_a ......:2;.:O..;.O,;.;7/,;.;1,;.;1 , .::2.::84....;...-1;.;1;.;:9:.:7_-0;;.O~ Installation/Wire Connection Guide Manuel d'installation et de connexion Guia de instalacion/conexion de cables mDliEraD . . . -1. BEFORE STARTING / PREPARATIFS / ANTES DE COMENZAR a 1, -This set is exclusively for use in cars with a negative ground, 12 V power supply. 1.
• Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) • Montage fixe (TOYOTA, NISSAN et autres vehicules equipes ISO/DIN) This unit is designed for fixed installation in the dashboard. If the vehicle is equipped with a factory-installed radio, install the source unit with the parts and screws marked (*) (Figure 7). If the vehicle is not equipped with a factory-installed radio, obtain an installation kit to install the source unit in the following procedure.
........ -6. WIRE CONNECTIONS / CONNECTIQUE / CONEXION DE CABLES To external amplifier * To eliminate audio short circuits, do not remove the caps of unused RCA cables. CAUTION:Please make sure when connecling external power amplifier, Ihat you properly, 10 the car chassis, ground the amplifier. If this is not done, severe damage 10 Ihe source unil may happen. Vers un ampJificateur externe ~; Pour suppnmer les courtS-CirCUIts audio, ne pas retirer les capuchons des cables RCA non utilises.
. . . . IlEa -7. SYSTEM EXAMPLE/EXEMPLE DE SYSTEME/EJEMPLO DESISTEMA • Example of the system using an external amplifier (Audio Visual) • Exemple de systeme utilisant un amplificateur exterieur.
'itii, ' . GARANTIE LIMITEE DE CLARION 2007 clarion Pour Ie Canada et les Etats-Unis seulement A moins d'une contre-indication, les produits Clarion achetes chez un revendeur Clarion autorise sont garantis contre tous les defauts de materiaux et de mise en oeuvre pour une periode d'un (1) an compter de la date d'achat originelle.
281-0632-02 2006/9 clarion CLARION 2007 LIMITED WARRANTY For USA and Canada only Except as noted, Clarion products purchased from an authorized Clarion dealer are warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase.
