Owner’s manual Mode d’emploi Manual de instrucciones DRX9675z FM/AM CD PLAYER WITH CD/MD CHANGER CONTROL/AC PROCESSOR • LECTEUR CD FM/AM AVEC COMMANDE DE CHANGEUR CD/MD/PROCESSEUR AC • RADIO DE FM/AM CON REPRODUCTOR DE DISCOS COMPACTOS Y CONTROLADOR DE CAMBIADOR DE DISCOS CD/MD/ PROCESADOR AC Clarion Co., Ltd. 2000/5 (A·C) All Rights Reserved. Copyright © 2000: Clarion Co., Ltd.
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, MD changer and TV tuner connected via the CeNET cable.
6. REMOTE CONTROL Handling Compact Discs 2. PRECAUTIONS 1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.
3. CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE 5. DCP Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
Functions of Remote Control Unit Buttons Button Mode Radio CD CD changer MD changer TV , FUNC POWER Turns power on and off. When pressed and held for 1 second: Turns power off. Switches among radio, CD, CD changer, MD changer and TV. - BAND DISC UP PROG TOP Switches reception band. . VOLUME Increases and decreases volume (in all modes). / SEARCH Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/ fast-backward.
Basic Operations 7. OPERATIONS Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Radio Operations Radio Operations CD Operations FM Reception Manual tuning Auto store Loading a CD ® For enhanced FM performance the tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits. There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1.
Other Handy Functions CD Operations Ejecting a CD Top function Setting the clock pressing Direct buttons " (1 to 5). 1. Press the Eject button 6. The SLOPING CONSOLE opens and a CD ejects. “EJECT” appears in the display. The top function resets the CD player to the first track of the disc. Press TOP button 8 to play the first track (track No. 1) on the disc. 1. Press MODE button & four times to display the adjustment selection display. 2.
Other Handy Functions Adjusting the dimmer level You can adjust the reduced illumination level of the dimmer. ∗ The factory default setting is “5”. ∗ To use the dimmer, set the dimmer setting to OFF to 5. 1. Press MODE button & four times to switch to the adjustment selection display. 2. Press VOLUME buttons 2 up (w) or down (z) to select “DIMMER LV.”. 3. Press the right side of SEARCH button 4 to move cursor. 4.
8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FUNCTION button 7 and select the CD changer mode to start play. If 2 CD changers are connected, press FUNCTION button 7 to select the CD changer for play. ∗ If “NO MAG” appears in the display, insert the magazine into the CD changer.
MD Changer Operations MD Changer Operations MD changer functions Selecting a track Disc scan play When an optional MD changer is connected through the CeNET cable, this unit controls all MD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FUNCTION button 7 and select the MD changer mode to start play. If 2 MD changers are connected, press FUNCTION button 7 to select the MD changer for play. ● Track-up 1.
TV Operations TV Operations AC PROCESSOR operations TV tuner functions Manual tuning Auto store AC PROCESSOR functions When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor. There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1.
AC PROCESSOR operations Selecting the standard mode or the professional mode ∗ The factory default setting is “PRO”. 1. Press MODE button & four times to switch to the adjustment selection display. 2. Press VOLUME buttons 2 up (w) or down (z) to select “AC-PROCSSR”. 3. Press the right side of SEARCH button 4 to move the cursor. 4. Press VOLUME buttons 2 up (w) or down (z) to set the mode to “STD” or “PRO”. 5.
AC PROCESSOR Operations Editing/storing a DSF menu (User memory) 1. Select a DSF menu which you want to edit on the basis of. 2. Press ENT button $. 3. Press the right SEARCH button 4 to select the EFFECT to be adjusted. EFFECT: Adjusts the percentage of reflected sound. 4. Press the right side of SEARCH button 4 to move the cursor. 5. Press VOLUME buttons 2 up (w) or down (z) to make the adjustment (0%~100%). 6. Press ENT button $. 7. Press one of the Direct buttons " to store the edited contents. 8.
AC PROCESSOR Operations About the compensation of frequency characteristics See Figure 1 concerning the relationship of the center frequency, Q-curve (Q) and gain. Level (dB) Problem Q curve (Q) High Q curve; 20 Low Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc.
10. ERROR DISPLAYS 11. SPECIFICATIONS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. MD changer CD changer CD Error Display Cause Measure FM Tuner Audio Frequency Range: 87.9 MHz to 107.
Memo 32 DRX9675z
