Specifications

36
2005 Product Application Guide
37
2005 Product Application Guide
M455 AM/FM Marine CD Player
Step-Up Features:
• iPod Ready
• Pelgan Z Coated Circuit Board for Marine Use
• 2-Band Parametric EQ (Z-Enhancer)
• Built-In Adjustable Low-Pass Crossover:
50Hz/80Hz/120Hz
• 208 Watts (50 Watts x 4 Channel) Max Power Output
• 4-Channel RCA Line Level Output
• Screen Saver With User-Programmable
Message Information
• Adjustable Display Contrast
• CD Text, CD and Station Titling
• CeNET Control: TV Tuner, 6-Disc CD Changer,
SIRIUS Satellite Radio Receiver
• Adjustable AUX Input
• Wired Remote Ready
CMD4 AM/FM Marine CD Player With
Water-Resistant Front Panel
Step-Up Features:
• Watertight, Flip-Down Faceplate With Drip Shield and
UV-Resistant Controls
• 212 Watts (53 W x 4 Ch.)
• Built-In Subwoofer Crossover: 60Hz/100Hz/200Hz
• 6-Channel RCA Line Level Output
• Adjustable AUX Input
Marine Remotes
Clarion’s new wired remote controls let users manage
their Clarion marine source unit from just about anywhere
inside the boat. Users can adjust volume, track selection,
play/pause, disc up and down, power on and off, radio
band, source, and mute.
CMRC1-SB Marine Remote Controller With LCD
for CMD4 and M455
CMRC2-SB Marine Remote Controller Without LCD
for CMD4 and M455
Bigger is Better: Marine Speakers
That’s our motto in ‘05. Here’s why:
• Three new speakers
• An all-new Sport Series line, which includes a 7" coaxial
speaker and a 10" subwoofer
• Three new 6 1/2" speakers
The Industry Reference
What makes Clarion’s marine speakers the best?
Attention to detail. We pride ourselves on our speakers’
ability to reproduce sound that’s second to none. From
the titanium dome tweeters to the polypropylene mid-
woofer cone, rubber insulated leads, and gold-plated
terminals, Clarion’s marine speakers were made to
handle the marine environment. We take it a step further
when comes to the speaker grilles and frames, creating
them out of a non-corrosive, high-impact material called
Centrex 814. Its properties make it resistant to cracking
and discoloration.
Common Features:
• Meets or Exceeds ASTM B117 (Salt/Fog Explosure)
• Meets or Exceeds ASTM 04329 (UV Exposure)
• Santoprene Rubber Surround
• High-Impact Centrex 814 Grille/Frame
• Protected Magnet and Rear Cone Design
• Liquid Drainage Channel
• Rubber Insulated Tinsel Leads
• Speaker Cable Support Tab
• Gold-Plated Speaker Terminals
• Stainless Steel Mounting Hardware
• Rubber Mounting Gasket
CMCS7.1 7" Component Marine Speaker System
• 7" Polypropylene Cone
• 1.2" Titanium Dome Tweeter
• Flush and Surface Tweeter Mounts
• Integrated Passive Crossovers
• 160 Watts Max Power Handling
CMCX7.1 7" Coaxial Marine Speaker
• 7" Polypropylene Cone With 1.2" Titanium Dome Tweeter
• 160 Watts Max Power Handling
CMDC7.1 7" Dual Cone Marine Speaker
• 7" Dual Polypropylene Woofer Cone
• 120 Watts Max Power Handling
CMSW10.1 10" Marine Subwoofer
• 10" Polypropylene Cone
• Optimized for Infinite Baffle Application
• 350 Watts Max Power Handling
CMCS7.1s Sport Series 7" Coaxial Marine Speaker
• 7" Polypropylene Woofer Cone With 1.2" Titanium
Dome Tweeter
• New Cosmetic Design
• 160 Watts Max Power Handling
CMSW10.1s Sport Series 10" Marine Subwoofer
• 10" Polypropylene Woofer Cone
• New Cosmetic Design
• 350 Watts Max Power Handling
CM1635 6 1/2" Component Marine Speaker System
• 6 1/2" Polypropylene Woofer Cone
• 1" Titanium-Coated Tweeter
• 100 Watts Max Power Handling
CM1625 6 1/2" Coaxial Marine Speaker
• 6 1/2" Polypropylene Woofer Cone With
Titanium-Coated Tweeter
• 100 Watts Max Power Handling
CM1605 6 1/2" Dual Cone Marine Speaker
• 6 1/2" Dual Polypropylene Woofer Cone
• 100 Watts Max Power Handling
Marine Power Amplifier
A marine amplifier is essential in marine applications
where high ambient noise, such as wind, water and
engine noise, competes with the sound system. Without
an amplifier, cranking up the volume only means one
thing: increased distortion and damage to your speakers.
It’s a known fact in the audio world that an amplifier does
more than increase a system’s volume level. It reduces
distortion at high volume levels, resulting in music repro-
duction that’s crisp, clean and powerful.
APX480M 4/3/2-Channel Power Amplifier
• 640 Watts of Max Power Output
• Continuous 320-Watt Average Power Output
• Typical 2-Ohm Stereo 115 Watts x 4 Channels @
.05% THD
• Bass Extender Control (0-15dB @ 45Hz)
• Adjustable High-/Low-Pass Crossovers (55-550Hz,
12dB/Oct.)
• Mixed Mode Operation
• 4/3/2-Channel Operation
• MOS-FET Output Design
• Speaker Level Inputs
• Fully Painted Non-Corrosive Heat Sink
• Conformally-Coated Double-Sided FR4 PC Board
APX280M 2/1-Channel Power Amplifier
• Maximum 320 Watts of Max Power Output
• Continuous 160 Watts Power Output
• Typical 2-Ohm Stereo 125 Watts x
2 Channels @.2% THD
• Typical Bridged Power 1kHz 250 Watts x 1 Channel @
0.2% THD
• Bass Extender Control (0-15dB @ 45Hz)
• Adjustable High-/Low-Pass Crossovers
(55-550Hz, 12dB/Oct.)
• Mixed Mode Operation
• Speaker Level Inputs
• Fully Painted Non-Corrosive Heat Sink
• Conformally-Coated Double-Sided FR4 PC Board