Owner`s manual

*The factory default setting is "ON"
* Even if the level adjustment display is set to "OFF",
signals
can be output from the external output
1 Press
and hold ADJ button []] for 1 second or
longer to switch to the adjustment selection display
2 Press the right or left side of SEARCH button
[E] to select "NON-FADER"
3 Turn the Rotary knob
[N] clockwise to set "ON"
or counterclockwise to set "OFF"
eON:
When you press A-M button [j], the "NON-
FAD VOL" item is displayed
*The output level can be adjusted
eOFF:
Even when you press A-M button [j], the
"NON-FAD VOL" item is not displayed
* The output level cannot be adjusted
4 Press ADJ button
[]] to return to the previous
mode
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices when connected to this unit
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume
1 Press and hold the ADJ button []] for 1 second
or longer to set Adjust mode
2 Press the SEARCH button
[E] and select "AUX
SENS"
3 Turn the Rotary knob [N] clockwise or coun-
terclockwise as needed and select from
"SENS HIGH", "SENS MID" or "SENS LOW"
*The factory default setting is "SENS MID"
4 Press
ADJ button []] to return the previous mode
Setting the button illumination
*The factory default setting is "ILLM GREEN"
1 Press and hold the ADJ button []] for 1 sec-
ond or longer to set Adjust mode
2 Press the SEARCH button
[E] and select "KEY
ILLUMI"
3 Turn the Rotary knob
[N] clockwise or coun-
terclockwise as needed and select from "ILLM
GREEN" and
"ILLM RED"
4 Press ADJ button
[]] to return the previous
mode
Other Handy Functions
Setting the method for Ttitle scroll
Set how to scroll in CD-TEXT or MD
*The factory default setting is "ON"
1 Press and hold the ADJ button
[]] for 1 sec-
ond or longer to set Adjust mode
2 Press
the SEARCH button [E] and select
"AUTO SCROLL"
3 Turn the Rotary knob [N] clockwise or coun-
terclockwise and select "ON" or "OFF"
eON:
To scroll automatically
eOFF:
To scroll just 1 time when the title was changed
or the title key was pressed
4 Press ADJ button []] to return the previous mode
Switching the screen saver
*The factory default setting is "RANDOM"
1 Press and hold the ADJ button []] for 1 sec-
ond
or longer to set Adjust mode
2 Press
the SEARCH button [E] and select
"AUTO SS"
3 Turn the Rotary knob [N] clockwise or coun-
terclockwise as needed to switch to
"ss OFF"
"ss Ptn1" e "ss Ptn2" e "ss Ptn3" e "ss
RANDOM" e "ss OFF"
4 Press ADJ button []] to return the previous
mode
Setteng the clock
1 Press and hold the ADJ button []] for 1 sec-
ond
or longer to set Adjust mode
2
Press the SEARCH button [E] and select
"CLOCK"
3 Press ENT button aID
4 Press the SEARCH button [E] to select the
hour or the minute
5
Turn the Rotaly knob [N] clockwise or
counterclockwise to set the correct time
* The clock is displayed in 12-hour format
6 Press ENT button
aID to store the time into
memory
7 Press ADJ button
[]] to return the previous
mode
Note:
• You cannot set the clock when it is displayed with
only the ignition on If you drain or remove the car's
battery or take out this unit, the clock is reset While
setting the clock, if another button or operation is
selected, the
clock set mode is canceled
nX7715
/
Hx-n1n
17