Clarion AM/FM CD PLAYER WITH CD/MD CHANGERITV/DAB/ AC PROCESSOR CONTROL • COMBINE RADIO/CD AM/FM AVEC PILOTE DE CHANGEUR CD/MDITV/DAB/ PROCESSEUR AC • SINTONIZADOR DE AM/FM YREPRODUCTOR DE DISCOS COMPACTOS CON CONTROL DE CQMBIADOR DE DISCOS COMPACTOS/MINIDISCOS) TELEVISORISINTONIZADOR DAB/PROCESADOR AC (OXU~$ only) (HX 010 only) (HX D10 uniquemenl) (Solamente HX 010) (OX27'l5 uniquement) (Solamente OXZ715) ~~", ~:~ ~~ Icmml Em au.. ~·:.=~_,-IlI.lle If!lOO9,;;::8 &:J!1-.
Thank you for purchasing the Clarion DXZ715/HX-D10 * Please read this owner's manual in its entirety before operating this equipment * After reading this manual, be sure to keep it in a handy place (e g , glove compartment) * Check the contents of the enclosed warranty card and keep it carefully with this manual * This manual includes the operating procedures of the CD changer, MD changer, TV tuner and AC processor connected via the CeNET cable The CD changer, MD changer, TV tuner and AC processor have th
1 When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible If moisture forms on the disc, wipe it off with a soft cloth If moisture forms on the optical parts of the player, do not use the player for about one hour The condensation will disappear naturally allowing normal operation 2 Driving on extremely bumpy roads which cause severe vibration may cause the sound
Handling Compact Discs Use only compact discs bearing the rnJD~~ mark DIGITAL AUDIO Do not play heart-shaped, octagonal, or other specially shaped compact discs Handling • New discs may have some roughness around the edges If such discs are used, the player may not work or the sound may skip Use a ball-point pen or the like to remove any roughness from the edge of the disc • To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by
Source unit / Appareil pilofe / Unidad fuente 7 With the SLOPING CONSOLE opened I A,vec la CONSOlE/Net/HABtE oUlIerte / can la consola SLOPING CONSOLE abierta , no~k 3 C~E([ d'=b IL ~ d'=b d'=b (. C ~~~~~c ::>~') - I~ ~ 11 ~ ~ J III \ \...
Note: • Be sure to read this chapter referring to the front diagrams of chapter "3 CONTROLS" on page 5 (unfold) Names of Buttons [I] RELEAS button rn [I] ~ []] ~ [l] [!] ~ TITLE button ADJ (adjust) button Power button FNC (function) button OPEN button EJECT button PSIAS (preset scan/auto store) button SCN (scan) button RPT (repeat) button RDM (random) button BEQ(Beat EQ) Button Preset button (1 to 6) Direct button (1 to 6) (7 to 12) Display Items o [1] [j] [HJ [1] ~ GlJ TOP button DISP (display)
....BI The control panel can be detached to prevent theft When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches We recommend taking the DCP with you when leaving the car Removing the DCP Attaching the DCP 1 With the SLOPING CONSOLE closed, turn off the power 1 Insert the DCP so that the ® section on the right side of the DCP catches on the hook @ on the unit 2 Press the RELEASE button [I] deeply to open the DCP.
6. REMOTE CONTROL * For the operating procedures of the steering remote control unit provided with the HX-D10, refer to the operating manual packed with the steering remote control unit Receiver for remote control unit Operating range: 30° in all directions Remote control unit - Signal transmitter !-+-;-..
Functions of Remote Control Unit Buttons ~ FUNC Turns power on and off When pressed and held for 1 second: Turns power off Switches among radio, DAB, CD, CD changer, MD changer, TV and AUX ~ BAND Switches reception band DISC UP PROG TOP Plays the first track Top play Moves the next disc in increasing order Switches reception band ~ VOLUME Increases and decreases volume (in all modes) ~ SEARCH Moves preset channels up and down Moves tracks up and down When pressed and held for 1 second: Fast-for
Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold).
Basic Operations Setting the Beat EQ This unit comes with 5 types of sound tone effects stored in memory Select the one you prefer * The factory default setting is "USER CUSTOM" Each time you press BEQ button ~, the tone effect changes in the following order "1 BASS BOOST" ... "2 IMPACT" ... "3 EXCITE" ... "USER CUSTOM" ...
Basic Operations 2 Press the SEARCH button [HI and select from "TREB ~GAIN ~" -. "TREB ~F 12K~" -.
Radio Operations FM Reception Manual tuning For enhanced FM performance the mR61:rUNE~® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode, the frequency changes one step at a time In quick tuning mode, you can quickly tune the desired frequency 1 Press BND button [IT] and select the desired band (FM or AM) Changing the recep
Radio Operations CD Operations 2 Press and hold AS button [II for 2 seconds or longer The stations with good reception are stored automatically to the preset channels * If auto store is performed in the FM bands, the stations are stored in FM3 even if FM 1 or FM2 was chosen for storing stations Loading a CD Preset scan Preset scan receives the stations stored in preset memory in order This function is useful when searching for a desired station in memory 1 Press PS button [II 2 When a desired station is
CD Operations Ejecting a CD Top function 1 Press the EJECT button @] The SLOPING CONSOLE opens and a CD ejects "EJECT" appears in the display The top function resets the CD player to the first track of the disc Press TOP button [ill to play the first track (track No 1) on the disc Scan play Be careful not to get your fingers caught when opening and closing the SLOPING CONSOLE 2 Remove the CD and press OPEN button @] to close the SLOPING CONSOLE Notes: • Be sure to close the SLOPING CONSOLE after removin
Other Handy Functions Entering titles Adjusting the display contrast Titles up to 10 characters long can be stored in memory and displayed for TV stations The numbers of titles that can be entered for each mode are as follows You can adjust the display contrast to match the angle of installation of the unit * The factory default setting is "8" (Adjustment level: 1 to 18) 1 Press and hold ADJ button W for 1 second or longer to switch to the adjustment selection display Mode TV mode Number of titles 15 t
Other Handy Functions * The factory default setting is "ON" * Even if the level adjustment display is set to "OFF", signals can be output from the external output 1 Press and hold ADJ button []] for 1 second or longer to switch to the adjustment selection display Setting the method for Ttitle scroll Set how to scroll in CD-TEXT or MD * The factory default setting is "ON" Press the right or left side of SEARCH button 1 Press and hold the ADJ button []] for 1 second or longer to set Adjust mode [E] to s
CD Changer Operations CD changer functions Procedure to scroll a title When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions This unit can control a total of 2 changers (MD and/or CD) Set "AUTO SCROLL" to "ON" or "OFF" (The factory default setting is "ON" See p 17 ) Press FNC button Wand select the CD changer mode to start play If 2 CD changers are connected, press FNC button W to select the CD changer for play * If "NO MAGAZINE" appears in the dis
CD Changer Operations Top function Disc repeat play The top function plays from the first track (track No 1) of the disc After all the tracks on the current disc have been played, the disc repeat play automatically replays the current disc over from the first track This function continues automatically until it is cancelled 1 Press and hold RPT button [§] for 1 second or longer "DISC" and "RPT" light in the display and the disc repeat play starts • When playing a disc 1 to 6 Press Direct button [ID (1 t
MD Changer Operations MD changer functions Selecting a track When an optional MD changer is connected through the CeNET cable, this unit controls all MD changer functions This unit can control a total of 2 changers (MD and/or CD) • Track-up 1 Press the right side of SEARCH button [H] to move ahead to the beginning of the next track rn and select the MD changer Press FNC button mode to start play If 2 MD changers are connected, press FNC button to select the M0 changer for play * If "NO DISC" appears in
MD Changer Operations 2 To cancel the disc scan play, press and hold SCN button [[] again "DISC" and "SCN" go off from the display and the current track continues to play TV Operations TV tuner functions When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions To watch TV requires a TV tuner and monitor Repeat play The repeat play continuously plays the current track This function continues automatically until it is cancelled Press RPT button [§] "RPT" ligh
TV Operations 1 Press BND button [IT] and select the desired band (TV1 or TV2) * If "MANU" is not lit in the display, press and hold BND button [IT] for 1 second or longer "MANU" lights in the display and manual tuning is now available 2 Tune into a station • Quick tuning: Press and hold the right or left side of SEARCH button [H] for 1 second or longer to tune in a station • Step tuning: Press the right or left side of SEARCH button [H] to manually tune in a station Recalling a preset station Preset sca
A C Processor Operations DSP control function If the DSP (DPH910), sold separately, is connected to this unit using the CeNET cable, all functions of the AC Processor can be controlled DSF functions There are 2 modes available in DPH910, STD mode and professional mode Choose one of them and adjust the sound field and the sound quality * STD mode: Standard mode • Functions common to each mode: Selecting the easy mode or the professional mode * The factory default setting is "STO" rn 1 Press and hold ADJ
AC Processor Operations G.
AC Processor Operations Editing/storing a sound field menu (User memory) 1 Select a sound field menu which you want to edit on the basis of 2 Press and hold ADJ button []] for 1 second or longer 3 Press the right or left side of SEARCH button [B] to select the item to be adjusted There are "EFFECT", "DELAY", "REAR MIX", "REV TIME" or "ROOM SIZE" and "HIGH" or "LIVENESS" available for the items to be adjusted * For details on each adjustment item, refer to the owner's manual supplied with the DPH910 4 Tur
AC Processor Operations Selecting a P.EQ menu 1 Press A-M button G1l and select "P.EQ" "P EQ" blinks in the display 2 Press BND button [TI] to select "BASC" (basic) "BASC" is displayed in the operation status indication fD in the display 3 Press one of Direct buttons [ID and select the desired P.EQ menu * To select the user memory, press BND button [IT] to select "USR" and press one of Direct buttons [[] Editing/storing a P.
Note: Be sure to read this chapter referring to the front diagrams of chapter "3 CONTROLS" on page 5 (unfold) Digital Radio / DAB Operations DAB control function Seek tuning When a CeNET cable is used to connect a DAB (DAH913) (sold separetely), all functions can be operated 1 Press FNC button Listening to the DAB station 1 Press FNC button W to select DAB mode 2 When the unit receives a DAB station, the display changes in the following order Frequency channel" service label It'll Clat--ionil Switchin
Digital Radio / DAB Operations Manual memory TA (Traffic Announcement) The main unit has a manual memory function for DAB programmes Up to 18 programmes (6 programmes each) can be preset in the preset buttons In TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode Traffic programme (TP) automatic tuning is also possible * This function can only be used when "TP" is lit in the display When "TP" is lit,
Digital Radio / DAB Operations ment broadcast reception is cancelled and the main unit goes into INFO standby mode • Cancelling INFO standby mode To cancel INFO standby mode, press and hold TA (ISR) button [IQ] for 1 second or longer • Information select This is a function for selecting INFORMATION ON or OFF in Information interrupt mode PTY This function enables you to listen to the selected programme type, irrespective of the function mode * PTY broadcasts are not yet available in all countries :): In I
Digital Radio / DAB Operations Selecting PTY 1 When you press PTY (ROM) button unit goes into PTY select mode W, the 2 Press anyone of Preset buttons ~ Alternatively, turn the Rotary knob [N] clockwise or counterclockwise to select the desired PTY * Below are the factory default settings stored for Preset buttons [[] Preset number PTY item Contents 1 News News 2 Top40 Top40 3 Country Country 4 Soft Soft 5 6 Classici Classical R&B Rhythm and Blues 4 Press ADJ button [I] to return to th
DVD Operations Operation • Play/Still operation Press the ENT button [N] to select the desired mode (play, still (pause)) Each time the button is pressed, the mode changes cyclically • Chapter up/down operation (FFIFB operation) Press the right side of SEARCH button [HJ for 1 second or shorter to increment chapters Hold down the right side of SEARCH button [HJ for 1 second or longer to fast forward Press the left side of SEARCH button [HJ for 1 second or shorter to decrement chapters Hold down the left si
Power does not turn on (No sound is produced) Replace with a fuse of the same amperage If the fuse blows again, consult your store of purchase Incorrect wiring Consult your store of purchase No sound output when operating the unit with amplifiers or power antenna attached Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna 1 Turn the unit off 2 Remove all wires attached to the power antenna lead Check each wire for a possible short to g
If an error occurs, one of the following displays is displayed Take the measures described below to eliminate the problem A CD is caught inside the CD deck and is not ejected This is a failure of CD deck's mechanism and consult your store of purchase ERROR 3 A CD cannot be played due to scratches, etc Replace with a non-scratched, non-warped-disc ERROR 6 A CD is loaded upside-down inside the CD deck and does not play Eject the disc then reload it properly ERROR 2 A CD inside the CD changer is not
FM Tuner CD Player Frequency Range 87 9 MHz to 107 9 MHz System Compact disc digital audio system Usable Sensitivity 11 dBf Usable Discs Compact disc 50dB Quieting Sensitivity: 17 dBf Frequency Response (±1 dB) 5 Hz to 20 kHz Alternate Channel Selectivity: 75 dB Signal to Noise Ratio (1 kHz) 100 dB Stereo Separation (1 kHz) 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Dynamic Range (1 kHz) 95 dB Harmonic Distortion 0 01 % AM Tuner Frequency Range 530 kHz to 1710kHz Usable Sensitivity 25 J.
Printed in China I Imprime en Chine I Impreso en China Clarion 2000/12 (D C) 284-9306-00 InstaliationlWire Connection Guide (XDZ716 I D I HX-D10) Manuel d'installatlon et (161 51 HX..D10) GUla de instalacion/conexion de cables (XDZ716 I DXZ715 I HX-D10) -MMI -1. BEFORE STARTING IPREPARATIFS/! ANTES DE COMENZAR This set is exclusively for use in cars with a negative ground, 12 V power supply 2.
• Montaje fijo II Monta e fixe • Fixed Mount (TOVOTA, NISSAN and other ISO/DIN equipped vehicles) This unit is designed for fixed installation in the dashboard.
... GIlD -6. WIRE CONNECTIONS leONNE I CONEXION DE CABLES *) Note 1: Some units do not have connecting leads or jacks (Refer to Note~:The HX-O.
.. G.pi,[,j· -7. SAMPLE SYSTEMS /·&>c&MPldi9 D&·SYSm&MES/ EJEMPLOS DE SISTEMAS • Example of thesystern using an external amplifier. (AUDIO) IIIl Exempie de systeme utilisant un amplificateur exterieur (AUDIO) • Ejemplo de sistema utilizando un amplificador externo (AUDIO) • Example of the system using an internal amplifier (AUDIO) \Nith an inte.rn.
...
Clarion m:mmPROOUCT WAR RAN T YIN FOR MAT ION TEAR THIS PAGE OFF AND KEEP IT WITH YOUR RECEIPT! REGISTRATION CAROl Thank you for selecting a high-quality product from Clanon. We hope you are completely satisfied with your purchase. We'd like to help serve you better by finding out more about your reasons for choosmg Clanon. Please take a few moments to fill out the registration mformation on thiS card and answer a few questions about yourself and your product.
2001/1 (D.C) Printed in Japan Ilmprlrne au Japon I Gedruckt in Japan I Starnpa.to in Gjarponc RCB·147 280-7651-00 Owner's manual RCB-147 Mode d'emploi Bedienungsanleitung Istru.lloni per I'uso TELECOMANDO DA VOLANTE lENKRADFERNBEDIENUNG PRECAUTION I PRECAUTIONS I VORSICHTSMASSNAHMEN I PRECAUZIONI 1. Do not install the remote control unit in a location where it may interfere with the airbag. 2. Do not install the remote control unit in a location where it may block the view of instrument panel meters.
DIFFERENTS ELEMENTS' BAUTEILE , COMPONENTI Remote control unit Battery (CR2032) Owner's manual Dispersion sheet 1 Telecommande 1 Pile (CR2032) . 1 Mode d'emploi .. 1 Feuille de dispersion. , '" '" INSERTING THE BATTERIES 'INSERTION Notes: Using batteries improperly can cause them to explode. Take note of the following points: .• Do not short-circuit, disassemble or heat batteries. • Do not dispose of batteries into fire or flames. • Dispose of spent batteries properly. F . L . •..C., , 1 .
