Ownerʼs manual 使用說明書 ຫဧ ໕ §ŸË¡◊ÕºŸÈ„™ Buku petunjuk untuk pemilik CD/USB/MP3/WMA RECEIVER CD/USB/MP3/WMA 接收器 CD/USB/MP3/WMA ൘གྷ ‡§√◊ËÕß√—∫ —≠≠“≥®“° CD/USB/MP3/WMA PENERIMA CD/USB/MP3/WMA Clarion Co., Ltd. All Rights Reserved. Copyright © 2006: Clarion Co., Ltd.
English Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. FEATURES ..................................................................................................................................... 2 PRECAUTIONS .............................................................................................................................. 3 HANDLING COMPACT DISCS ....................................................................................................... 4 CONTROLS .................................
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (Detachable Control Panel) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Storing the DCP in the DCP case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.) Removing the DCP 1. Press the [SRC] button for 1 second or longer to switch off the power. 2.
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (Detachable Control Panel) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Storing the DCP in the DCP case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.) Removing the DCP 1. Press the [SRC] button for 1 second or longer to switch off the power. 2.
. BUTTON TERMINOLOGY Note: Be sure to read this chapter referring to the front diagrams of chapter “4. CONTROLS” on page 5. Names of the Buttons and Their Functions ˁ̂ [RELEASE] button Press the [RELEASE] button to unlock the detachable panel. [A] button ዽ࿌ Press the button to switch to the ADJ mode. [ , ] buttons ‰∑¬ Select a station while in the Radio mode or select a track when listening to a CD/USB. These buttons is used to make various settings.
5. BUTTON TERMINOLOGY Note: Be sure to read this chapter referring to the front diagrams of chapter “4. CONTROLS” on page 5. Names of the Buttons and Their Functions ˁ̂ [RELEASE] button Press the [RELEASE] button to unlock the detachable panel. [A] button ዽ࿌ Press the button to switch to the ADJ mode. [ , ] buttons ‰∑¬ Select a station while in the Radio mode or select a track when listening to a CD/USB. These buttons is used to make various settings.
5. BUTTON TERMINOLOGY Note: Be sure to read this chapter referring to the front diagrams of chapter “4. CONTROLS” on page 5. Names of the Buttons and Their Functions ˁ̂ [RELEASE] button Press the [RELEASE] button to unlock the detachable panel. [A] button ዽ࿌ Press the button to switch to the ADJ mode. [ , ] buttons ‰∑¬ Select a station while in the Radio mode or select a track when listening to a CD/USB. These buttons is used to make various settings.
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (Detachable Control Panel) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Storing the DCP in the DCP case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.) Removing the DCP 1. Press the [SRC] button for 1 second or longer to switch off the power. 2.
English 7. REMOTE CONTROL Inserting the Battery 1. Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. 2. Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards. 3. Press the battery in the direction indicated by the arrow so that it slides into the compartment. 4. Replace the cover and slide in until it clicks into place.
English Functions of Remote Control Unit Buttons Button Mode Radio CD [SRC] Press the button to power on. Press and hold the button for 1 second or longer: Power off. Switch between Radio, CD/MP3/WMA, USB and AUX. [BND] Switch reception band. [ ],[ [ ] ],[ [ [MUTE] [ISR] Play the first track. Top play. Increase and decrease volume (in all modes). ] ] MP3/WMA and USB Move preset channels up and down. Move tracks up and down.
Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “4. CONTROLS” on page 5. ! CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
English Basic Operations Setting the Z-Enhancer This unit is provided with 3 types of sound tone effects stored in memory. Select the one you prefer. ∗ The factory default setting is “Z-EHCR OFF”. Each time you press the [Z] button, the tone effect changes in the following order: “Z-EHCR OFF” “Z-EHCR 1” “Z-EHCR 2” “Z-EHCR 3” “Z-EHCR OFF” ... Z-EHCR 1 : bass emphasized Z-EHCR 2 : treble emphasized Z-EHCR 3 : bass and treble emphasized Z-EHCR OFF : no sound effect Adjusting the balance 1.
Listening to the radio 1. Press the [SRC] button and select the Radio mode, then the radio will be on. 2. To select a preset band, press the [BND] button, then select one of the preset bands such as FM1, FM2, FM3 or AM. Every time the [BND] button is pressed, the display will change as: FM1 FM2 FM3 , 3. Press the [ desired station. AM FM1... ] button to tune in the 1. Press the [BND] button and select the desired band (FM or AM).
English Radio Mode Operations CD/MP3/WMA Mode Operations Recalling a preset station What is MP3? A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press the corresponding [DIRECT] button to recall the stored station.
File extensions Always add a file extension “.MP3” or “.WMA” to MP3 or WMA file by using single byte letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played. Logical format (File system) 1. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select “ISO9660 level 1, 2 or JOLIET or Romeo” as the writing software format. Normal play may not be possible if the disc is recorded on another format. 2.
English CD/MP3/WMA Mode Operations USB Mode Operation Loading a CD What is USB? Insert a CD into the center of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD plays automatically after loading. Notes: Never insert foreign objects into the CD SLOT. If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. Discs not bearing the mark and CD-ROMs cannot be played by this unit.
English USB Mode Operation USB drives may have different shape depends on brands. Some USB drives may not be able to plug into the port due to the shape design. Please use an extension cable instead. The company will not guarantee that every USB drive brands will be able to work with the main unit. Please remove your USB drive while you are not inside your vehicle because USB drive may not have automotive specification and it will be damaged by overheating environment.
English Operation Common to CD and USB Drive Pausing play 1. Press the [ ] button to pause play. “PAUSE” appears in the display. 2. To resume track play, press the [ again. ] button Title display mode 1. There are 5 types of display for the Title Display mode. 2. To select the next type, press the [T] button for less than 1 second. The arrangement is shown below. Displaying CD titles After 2 seconds This unit can display title data for MP3/WMA. 1. Press the [D] button to display the title. 2.
Fast-forward/fast-backward Fast-forward Press and hold the [ longer. Fast-backward Press and hold the [ longer. English Operation Common to CD and USB Drive Example of a mediumʼs folder/file hierarchy. ] button for 1 second or ] button for 1 second or ] button ∗ For Audio CD mode pressing the [ , for 1 second or longer will move forward or backward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster.
English Operation Common to CD and USB Drive ∗ Press the [UP] button while in the final folder to shift to the first folder. ∗ Folder without an MP3/WMA file is not selectable. 2. Press the [ , ] button to select a track. Top function Press the [BND] button, then the CD/USB will start playing from the first song (track number 1 ). Other various play functions Scan play CD-DA : This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc.
To change display setting 1. Press the [A] button to switch to the adjustment selection display. 2. Press the [ name”. “CLOCK(E)” “A-SCROLL” ] button to select the “item , “SCRN SVR” 3. Turn the [ROTARY] knob to select the “desired setting value”. ∗ In the case of item names appearing with the “E” suffix, after the item name, the [ ] button must be pressed to display the setting value. ∗ After completing settings, press the [A] button to return to the previous mode. Setting the clock 2-1.
English 9. TROUBLESHOOTING Problem General Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
Problem CD/MP3/WMA Measure Write MP3/WMA files onto the disc properly. Files are not recognized as an MP3/WMA file. Use MP3/WMA files encoded properly. File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. Disc is dirty. Clean the disc with a soft cloth. Disc is heavily scratched or warped. Replace with a disc with no scratches. Sound is cut or skipped. Noise is generated or no ise is mi xed with sound. MP3/WMA files are not encoded properly.
English 10. ERROR DISPLAYS CD/MP3/WMA DISC Error Display Cause ERROR 2 A DISC is caught inside the CD deck and is not ejected. This is a failure of CD deckʼs mechanism and consult your store of purchase. ERROR 3 A DISC cannot be played due to scratches, loaded upsidedown inside the CD deck etc. Replace with a non-scratched, non-warpeddisc. Eject the disc then reload it properly. NO FILE No audio file is detected in the DISC. Replace with audio contents loaded DISC.
Audio CD Maximum Power Output: 200 W (50 W X 4 ch) MP3 Decode Format MPEG 1, 2 and 2.5 - Layer 3 Sampling rate MPEG-1 : 32, 44.1, 48 (kHz) MPEG-2 : 16, 22.05, 24 MPEG-2.5 : 11.025, 44.1 Bit-rate (kbps) MPEG-1 : 32 - 320 MPEG-2 : 8 - 160 MPEG-2.5 : 8 - 160 VBR CD-ROM Format English Specifications ISO 9660 Level 1, 2, Romeo and Joliet WMA Sampling rate (kHz) 22.05 - 44.
Ownerʼs manual 使用說明書 ຫဧ ໕ §ŸË¡◊ÕºŸÈ„™ Buku petunjuk untuk pemilik CD/USB/MP3/WMA RECEIVER CD/USB/MP3/WMA 接收器 CD/USB/MP3/WMA ൘གྷ ‡§√◊ËÕß√—∫ —≠≠“≥®“° CD/USB/MP3/WMA PENERIMA CD/USB/MP3/WMA Clarion Co., Ltd. All Rights Reserved. Copyright © 2006: Clarion Co., Ltd.
