CZ509E_EN.
CZ509E_EN.book Page 2 Wednesday, January 21, 2009 5:27 PM CAUTIONS: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure.
CZ509E_EN.book Page 3 Wednesday, January 21, 2009 5:27 PM English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents 1. FEATURES .............................................................................................................
CZ509E_EN.book Page 4 Wednesday, January 21, 2009 5:27 PM English 1. FEATURES • Built in Bluetooth® handsfree (HFP) and audio streaming (A2DP & AVRCP) • BBE MP for compressed audio improvement • BEAT EQ for sound adjustment 2. PRECAUTIONS This unit is applicable for on-road 4 wheel vehicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate.
CZ509E_EN.book Page 5 Wednesday, January 21, 2009 5:27 PM English 3. CONTROLS Names of the Buttons and Their Main Functions Source unit [DISP] [OPEN ] [ [BND] [IR RECEIVER] [AUX] ] [SRC] [TA ] [ ], [ [SOUND] [SCN] [RPT] [ROTARY] ] [RDM] [DIRECT] With the FLIP DOWN PANEL opened [ ] (EJECT) [CD SLOT] [OPEN] button [DIRECT] buttons • Deeply push to unlock the flip down panel. [DISP] button • Store radio stations in memory or recall it directly while in radio mode.
CZ509E_EN.book Page 6 Wednesday, January 21, 2009 5:27 PM Names of the Buttons and Their Main Functions English [SCN] button • Perform scan play while in CD/MP3/WMA/ AAC/USB mode. [ROTARY] knob • Roatate to adjust the volume. [TA] button • Press to set the TA (Traffic Announcement) standby mode. [SRC] button • Turn the power on or off. [x], [v] buttons • Commence fast-forward or fast-reverse mode. [ ] button • Perform preset scan while in radio mode.
CZ509E_EN.book Page 7 Wednesday, January 21, 2009 5:27 PM The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. Press the [SRC] button (1 sec.) to turn off the power. 2. Deeply push in [OPEN] button to unlock the flip down panel. If the flip down panel does not open fully, gently open it with your hand.
CZ509E_EN.book Page 8 Wednesday, January 21, 2009 5:27 PM English 5. REMOTE CONTROL Functions of Remote Control Unit Buttons ∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main unit. Signal transmitter [SRC] [BND] [ ] [ ], [ [ ], [ ] [MUTE] [TA] [PS/AS] ] [DISP] [PTY] [AF] ● Shared modes [PTY] button [SRC] button • Press to cancel a PTY broadcast during a PTY interrupt. • Use to alternate operation mode among the various modes.
CZ509E_EN.book Page 9 Wednesday, January 21, 2009 5:27 PM Functions of Remote Control Unit Buttons [AF] button • AF function on and off. • Press and hold (1 sec.) for REG function on and off. [PTY] button • Press to perform repeat play. • When in MP3/WMA/AAC and USB/MTP modes, press and hold (1 sec.) for folder repeat play. • PTY mode on and off. [PTY] button ● CD/MP3/WMA/AAC and USB/MTP modes • Press to perform random play. • When in MP3/WMA/AAC and USB/MTP modes, press and hold (1 sec.
CZ509E_EN.book Page 10 Wednesday, January 21, 2009 5:27 PM English 6. OPERATIONS Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5. Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. Turning on/off the power Note: 1. Press the [SRC] button to turn on the power. 2. Press and hold the [SRC] button (1 sec.) for to turn off the power.
CZ509E_EN.book Page 11 Wednesday, January 21, 2009 5:27 PM Basic Operations 3-1. Press the [ ] button. 3-2. Press the [x] or [v] button to select the “BASS”/“MID”/“TREBLE” mode to adjust. 3-3. If you want to set the flat, press the [ ] button to return to the “CUSTOM” mode, then press and hold the [ ] button (1 sec.) , bass/mid/treble characteristics become flat. When “EXCITE/IMPACT/B-BOOST” is set: 3-2. Press the [ ] button. 3-3.
CZ509E_EN.book Page 12 Wednesday, January 21, 2009 5:27 PM Basic Operations English ● Adjusting the HPF CT (Clock Time) function 2-1. Select “HPF”. The CT function receives CT data sent from an “Radio Data System” station and displays the time. 3-1. Press the [ ] or [ ] button to select as following order. “THROUGH” ↔ “60” ↔ “90” ↔ “120” ∗ The factory default setting is “THROUGH”.
CZ509E_EN.book Page 13 Wednesday, January 21, 2009 5:27 PM Radio Operations 1. Press the [SRC] button and select the radio mode. The frequency or PS and PTY appears in the display. ∗ PS: Programme service name ∗ PTY: Programme type 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1... Tuning 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
CZ509E_EN.book Page 14 Wednesday, January 21, 2009 5:27 PM Radio Data System Operations English Radio Data System This unit has a built-in “Radio Data System” decoder system that supports broadcast stations transmitting “Radio Data System” data. When using the “Radio Data System” function, always set the radio to FM mode. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. ∗ The factory default setting is “ON”. 1.
CZ509E_EN.book Page 15 Wednesday, January 21, 2009 5:27 PM Radio Data System Operations ● Searching for a TP station When “TP” is not lit, if you press the [TA] button, “TA” in the display lights and the unit automatically receives a TP station. Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten.
CZ509E_EN.book Page 16 Wednesday, January 21, 2009 5:27 PM Radio Data System Operations English Emergency broadcast If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emergency broadcast can be heard. ● Cancelling an emergency broadcast If you press the [TA] button, emergency broadcast reception is cancelled.
CZ509E_EN.book Page 17 Wednesday, January 21, 2009 5:27 PM CD/MP3/WMA/AAC Operations Notes: • If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks). • Windows Media™, and the Windows® logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. ● To disable DRM (Digital Rights Management) 1.
CZ509E_EN.book Page 18 Wednesday, January 21, 2009 5:27 PM CD/MP3/WMA/AAC Operations English Backup Eject function Just pressing the [Q] button, ejects the disc even if the power to the unit was not turned on. 1. Press the [OPEN] button to open the FLIP DOWN PANEL. Note: • If the FLIP DOWN PANEL will not open far enough, open it gently with your hand. 2. Press the [EJECT] button. Remove the disc after it is ejected. 3. Close the FLIP DOWN PANEL. ∗ Press the center of the DCP to close.
CZ509E_EN.book Page 19 Wednesday, January 21, 2009 5:27 PM CD/MP3/WMA/AAC Operations Other various play functions Fast-forward/Fast-reverse ● Folder scan play ● Fast-forward 1. Press and hold the [v] button (1 sec.). ● Fast-reverse 1. Press and hold the [x] button (1 sec.). ∗ For MP3/WMA/AAC discs, it takes some time until the start of searching and between tracks. In addition, the playing time may have a margin of error.
CZ509E_EN.book Page 20 Wednesday, January 21, 2009 5:27 PM Bluetooth Operations English The Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device.
CZ509E_EN.book Page 21 Wednesday, January 21, 2009 5:27 PM Bluetooth Operations You can call a redial phone No. 1. Press the [BND] button to select “REDIAL”. 2. Press and hold the [ ] button (1 sec.) to call the redial phone No. ∗ Press the [SOUND] button to end the call. To change Bluetooth adjustment setting 1. Press and hold the [DISP] button (1 sec.) to switch to the Bluetooth adjustment selection display. 2. Press the [x] or [v] button to select the “item name”.
CZ509E_EN.book Page 22 Wednesday, January 21, 2009 5:27 PM Bluetooth Operations English ● ADD PHONE BOOK This option is used to add one of the phone No. 2-1. Select “ADD PHONE BOOK”. 3-1. Press the [ ] button (1 sec.), then the “RECEIVING” appears in the display. ∗ At the same time the phone No. from the paired phone book list is sent out, then there is a prompt on the mobile phone if it is successful.
CZ509E_EN.book Page 23 Wednesday, January 21, 2009 5:27 PM Bluetooth Operations ● Bluetooth Name This is a setting to determine whether any incoming call will be automatically or manually answered. This will display the name of the Bluetooth. 2-1. Select “BT NAME”. The Bluetooth name appears in the display. ∗ The factory default setting is “OFF”. 2-1. Select “AUTO ANS”. 3-1. Press the [ ] or [ ] button to select “ON” or “OFF”. ON: Any incoming call is automatically answered in 5 seconds.
CZ509E_EN.book Page 24 Wednesday, January 21, 2009 5:27 PM Operations Common to Each Mode English To change adjustment setting ● Turning the screen saver function on or off 1. Press and hold the [DISP] button (1 sec.) to switch to the adjustment selection display. 2. Press the [x] or [v] button to select the “item name”.
CZ509E_EN.book Page 25 Wednesday, January 21, 2009 5:27 PM Operations Common to Each Mode Set how to scroll in CD-TEXT, MP3/WMA/AAC title. ∗ The factory default setting is “ON”. 2-1. Select “SCROLL”. 3-1. Press the [ ] or [ ] button to select “ON” or “OFF”. • ON: To scroll automatically. • OFF: To scroll just 1 time. ∗ When you want to see the title again, in the title mode, press and hold the [DISP] button (3 sec.) to scroll the title.
CZ509E_EN.book Page 26 Wednesday, January 21, 2009 5:27 PM Operations Common to Each Mode English 9. Repeat steps 6 to 8 to enter up to 10 characters for the title. 10.Press and hold the [ ] button (2 sec.) to store the title into memory. Clearing titles 1. Select and play a CD in the CD changer for which you want to clear the title. 2. Press and hold the [DISP] button (1 sec.). 3. Press the [x] or [v] button to select “TITLE INPUT”. 4. Press the [ ] button.
CZ509E_EN.book Page 27 Wednesday, January 21, 2009 5:27 PM English 7. ACCESSORIES USB/MTP Operations USB memory/MTP device operation Note: • The following operations are the same as for CD mode: ∗ Pause ∗ Track selection ∗ Fast-forward/reverse (Except DRM file) ∗ Top function ∗ List search function ∗ Scan play ∗ Repeat play ∗ Random play ∗ Folder selection See “CD/MP3/WMA/AAC Operations” (page 1719) for details.
CZ509E_EN.book Page 28 Wednesday, January 21, 2009 5:27 PM USB/MTP Operations English • Do not turn on vehicle ignition when the MTP device is connected, since it may result in loss or damage to data on the MTP device. Connect the MTP device to the USB cable after vehicle ignition is turned on. Connecting a USB memory/MTP device 1. Connect the USB memory/MTP device to the USB cable. Playback will begin from the first file recorded on the device.
CZ509E_EN.book Page 29 Wednesday, January 21, 2009 5:27 PM iPod Operations Notes: • See the iPod Owner’s Manual for details regarding operation conditions. • The unit will not operate, or may operate improperly with unsupported versions. • For a list of compatible Apple iPod unit with the this model, please contact your Clarion dealer or www.clarion.com.
CZ509E_EN.book Page 30 Wednesday, January 21, 2009 5:27 PM iPod Operations English ● All random play Play all tracks within a selected category, in random order. (Corresponds to “Shuffle (Songs)” command on iPod.) 1. Press and hold the [RDM] button (1 sec.). ● To cancel play 1. Press the same play button once again. Notes: • When the repeat play mode is canceled, after play all tracks within a selected category, playback will begin from the first track in the selected category.
CZ509E_EN.book Page 31 Wednesday, January 21, 2009 5:27 PM iPod Operations English 3. When the track name display is showing, press the [v] button. Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled. ∗ Use the [ ] or [ ] buttons to select a track within a category. iPod menu list back In the iPod menu operation mode: ∗ If press the [BND] button, it will return to the previous subfolder list mode. ∗ If press and hold the [BND] button (1 sec.
CZ509E_EN.book Page 32 Wednesday, January 21, 2009 5:27 PM General Problem Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Nothing happens when buttons are pressed. Display is not accurate. No sound heard No sound heard CD/MP3/WMA/AAC English 8. TROUBLESHOOTING 32 Sound skips or is noisy. Sound is cut or skipped. Noise is generated or noise is mixed with sound. Sound is bad directly after power is turned on.
CZ509E_EN.book Page 33 Wednesday, January 21, 2009 5:27 PM USB/MTP/iPod Cause The device contains no MP3/ WMA/AAC files. The files are not proper MP3/ WMA/AAC format. Connectors are loose. Some USB portable music players may consume current that exceeds the USB rating. In this case, the unit’s overcurrent protection circuit operates to stop the music playback. Sound is The MP3/WMA/AAC files are interrupted or has improperly encoded. noise. The device isn’t The device is damaged. recognized.
CZ509E_EN.book Page 34 Wednesday, January 21, 2009 5:27 PM English 10.SPECIFICATIONS Radio section General Tuning System: PLL synthesizer tuner Receiving Frequencies: FM : 87.5 to 108 MHz (0.05 MHz steps) MW : 531 to 1602 kHz (9 kHz steps) LW : 153 to 279 kHz (3 kHz steps) Output Power: 19 W ✕ 4 (DIN 45324, +B=14.4V) Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative ground Power Consumption: Less than 15 A Speaker Impedance: 4 Ω (4 to 8 Ω allowable) Weight: Main unit: 1.
CZ509E_Backcover.fm Page 291 Tuesday, February 3, 2009 3:48 PM TEL :+49-6105-977-0 FAX :+49-6105-977-399 High-Tech High-Touch » DICHIARAZIONE DI CONFORMI CONFORMITA’ « (D.M.
CZ509E_Backcover.fm Page 292 Tuesday, February 3, 2009 3:11 PM TEL:+49-6105-977-0 FAX:+49-6105-977-399 CE DECLARATION of CONFORMITY Document No.
