Operation Manual

English
14 CZ209E/CZ209ER/CZ209EG
Folder select
Select a folder containing MP3/WMA files and
begins playing the first track in the folder.
1. Press [UP] or [DN].
Press the [UP] button to move to the next
folder. Press the [DN] button to move to the
previous folder.
2. To select a track, press [x] or [v].
Other play modes
● Scan play
This function locates and plays the first 10
seconds of all tracks recorded on a disc.
1. Press the [SCN] button for scan play.
● Folder scan play
This function locates and plays the first 10
seconds of the first tracks of all folders on an
MP3/WMA disc.
1. Press and hold the [SCN] button (1 sec.) for
folder scan play.
● Repeat play
This function plays the current track repeatedly.
1. Press the [RPT] button for repeat play.
● Folder repeat play
Repeatedly plays all tracks of the current folder
on an MP3/WMA disc.
1. Press and hold the [RPT] button (1 sec.) for
folder repeat play.
● Random play
This function plays all tracks recorded on a disc
in random order.
1. Press the [RDM] button for random play.
● Folder random play
This function plays all the tracks of all the folders
recorded on an MP3/WMA disc in random order.
1. Press and hold the [RDM] button (1 sec.) for
folder random play.
● To cancel play modes
1. Press the button previously selected.
∗ The play mode is canceled and the off mode
appears in the display for 2 seconds.
∗ If the error display “– –:– –” appears, these
modes (Scan/Repeat/Random) can be canceled
while still in play mode.
Operations Common to
Each Mode
● Displaying the settings
You can see the state of current settings at any
operation mode.
2-1. Select “SETTINGS”.
3-1. Turn the [ROTARY] knob to display the
current settings.
∗ When the setting is selected, the current
state will be displayed after 1 second.
● Turning the screen saver on/off
This unit has a screen saver function in which
various patterns and random characters can be
displayed on the operation status indication
area. This function can be turned on/off. If a
button is pressed while the screen saver is on,
the corresponding operation display is shown
for about 30 seconds, and then the display
returns to the screen saver.
∗ The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
To change settings
1. Press and hold the [DISP] button (1 sec.)
to switch to the adjustment display.
2. Press [x] or [v] to select the “item
name” as follows:
“SETTINGS” ↔ “SCRN SVR”
↔“SCROLL” ↔ “DIMMER” ↔ “TEL-SP”
↔ “TEL-SW”
∗ The adjustment item will be displayed for 2
seconds before showing the desired value.
3. Turn the [ROTARY] knob to select the
desired value.
∗ When “ENT” is flashing in the display, press
the [ ] button to adjust setting value.
4. After completing settings, press the [DISP]
button to return to the previous mode.
Example: After 1 second: