Owner`s manual
iPod Operations
This section describes operations when
connected to an Apple iPod via the USB cable.
Notes:
• See the iPod Owner's Manual for details
regarding operations.
•
The
unit will not operate,
or
may operate
improperly with unsupported versions.
• For
a list
of
Apple
iPod models compatible with
this unit, please contact your Clarion dealer
or
www.clarion.com.
• Made for iPod means that an electronic
accessory has been designed
to
connect
specifically
to
iPod
and
has been certified
by
the
developer to meet Apple performance
standards.
Apple is not responsible for the operation
of
this
device
or
its compliance with safety
and
regulatory standards.
iPod
and
iTunes are trademarks
of
Apple Inc.,
registered in the
U.
S.
and
other countries.
Connecting
an
iPod
When
an
iPod is connected to the USB cable,
the "Shuffle" setting on the iPod will become as
follows:
• "Shuffle (Albums)" play
~
Random play
• "Shuffle (Songs)" play
~
All random play
The iPod has two modes: the "Play mode" and
the "iPod menu mode" for selecting tracks.
Switch between these modes by pressing the
[BND] button.
Note:
•
To
connect an iPod, please use the USB cable
that came with your iPod.
Select iPod mode
1.
Press the [SRC] button.
Playback will begin from the last file that was
played on the iPod.
Notes:
•
The
following operations in Play mode operate
the same
as in CD mode: .
* Track
selection:
[~],
[~]
* Fast·forwardlfast·reverse:
[~],
[~]
* Pause"
[ENT]
"
~/II
See "CDIMP3IWMA
Operations"
(page 11-13)
for details.
• After
a Podcast file has completed playback, the
pause display,
or
the track-end position Play-
Time
display will appear.
At
that time, select a
music file once again.
• If the iPhone is used for telephone call in the
other operation mode
and
you wish to switch to
the iPod mode, you must finish the telephone call
and
press the
[~~11]
button to enter the iPod
mode.
Setting iPod simple mode
Use this function if you wish to operate through
your iPod connected to this unit via the USB
cable.
*
The
factory default setting
is
"OFF'.
1.
Press and hold the [DISP] button
(1
sec.).
2.
Press
[1+1II]
or
[~]
to select "S-CTRL".
3.
Press the
[~~11]
button.
4.
Turn the [ROTARY] knob to select "ON" or
"OFF".
• ON: Operations can be made through your
iPod.
• OFF: Operations cannot be made through
your iPod.
5.
Press and hold the
[~~11]
button
(1
sec.) to
store the setting and return to the previous
mode.
Notes:
•
When
performing iPod operations using simple
control mode, make the operations slowly.
If
repetitive operations are performed too quickly,
unforseen errors may occur.
• Some
iPod
models
do
not
support this function.
Consult your nearest Clarion dealer
or
website
to
confirm which models do
not
support this
function.
CZ209 17