Owner`s manual

Cell phone interrupt setting
If you connect this unit and your cell phone with
an optional cable, you can listen to your calls on
your car speakers.
When the AUX input jack is used to connect an
AUX
BLUETOOTH BB (BLT370) (sold
separately):
* The factory default setting
is
"OFF".
2-1. Select "TEL-SW".
3-1. Turn the [ROTARY] knob to select setting.
When turning the [ROTARY] knob, the
setting changes as follows:
"OFF"
+--+
"ON"
+--+
"MUTE"
OFF: This unit continues normal
operation even when the cell phone is
used.
ON: Telephone calls can be heard from
the speakers connected to the unit.
*
When
listening
to
calls
on
your car speakers,
turn
the
[ROTARY] knob
to
adjust the
volume.
MUTE: The sound from this unit is muted
during telephone calls.
Note:
If connecting a hands-free kit, make sure the
setting
is
ON
to
receive telephone audio through
the system.
AUX function
An external input jack (AUX) is provided on the
front panel to allow playback of sound and
music from external devices.
Selecting AUX
IN
sensitivity
Make the following settings to adjust sensitivity
when the sound from an external device is
difficult to hear even after adjusting the volume.
* The factory default setting
is
"MID".
1.
Press and hold the [DISP] button
(1
sec.).
2. Select "AUX SENS".
3.
Turn the [ROTARY] knob to select "HIGH",
"MID" or "LOW".
Note:
When
AUX mode
is
selected, AUX IN sensitivity
can be
set.
7.
ACCESSORIES
USB
Operations
USB
memory device operation
Note:
The
following operations are
the
same as
CD
mode:
* Titles
up
to
64 bytes can
be
displayed in USB
mode.
*Pause
* Track selection
*Fast-forwardlfast-reverse
*Scan
play
*Repeat
play
* Random
play
*Folder selection
See "CDIMP3IWMA
Operations"
(page 11-13)
for details.
About
USB
memory
USB stands for Universal Serial Bus, and
refers to an external bus standard supporting
data transfer rates of 12 Mbps.
This unit is compatible with USB 1.1/2.0 with
maximum data transfer rates of 12 Mbps.
USB memory devices playable via the unit's
USB cable are limited to those recognized as
"USB mass storage class devices"; operation
is
not guaranteed with all USB memory
devices.
* Devices compatible with "USB Mass Storage
Class" can
be
used
by
connecting to the host
device without special drivers or application
software.
Consult the manufacturer of your USB
memory device for information regarding
whether it is supported by "USB Mass
Storage Class" standards.
Audio files playable on this unit are limited to
MP3IWMA files. For details, see "MP3/WMA"
(page 11).
Copy-protected
WMA
files cannot be played
on this unit.
To prevent accidental loss of data, always
back up important data on your computer.
Connections to a computer,
or
through a USB
hub device are not supported.
CZ209
15