Owner`s manual
•
Adjusting
the balance
2-1. Select "BALANCE".
3-1. Turn the [ROTARY] knob to adjust balance
between right and left speakers.
*The factory default setting
is
"CENTER".
(Adjustment
range:
RIGHT12
to
LEFT12)
• Adjusting the fader
2-1. Select "FADER".
3-1. Turn the [ROTARY] knob to adjust balance
between front and rear speakers.
*The factory default setting
is
"CENTER".
(Adjustment
range:
FRONT12 to REAR12)
• Adjusting the non-fader volume
Adjust volume output from the unit's non-fader
output terminal.
2-1. Select "NF VOL".
3-1. Turn the [ROTARY] knob clockwise to
increase volume; turn counterclockwise to
decrease volume.
*The factory default setting
is
"0".
(Adjustment
range:
+6
to
-6)
Note:
• When in the sound adjustment mode,
if
no
operation is performed for
10
seconds
or
more,
the
mode
is cancelled
and
the unit returns to the
previous mode.
Setting the MAGNA BASS
EXTEND
The
MAGNA
BASS EXTEND function does not
adjust low frequencies like normal sound
adjustments, but emphasizes the deep bass
range with dynamic sound.
* The factory default setting
is
"OFF".
1.
Press and hold the [SOUND] button
(1
sec.)
to enable MAGNA BASS EXTEND.
2. Press and hold the [SOUND] button
(1
sec.)
to disable MAGNA BASS EXTEND.
10
CZ209
Radio Operations
Listening to broadcasts
1.
Press the [SRC] button and select radio
mode.
2.
Press the [BND] button and select the
reception band. Each time the button is
pressed, the band changes as follows:
F1
(FM1)
-+
F2 (FM2)
-+
F3 (FM3)
-+
AM
-+
F1
(FM1
)...
Tuning
3 tuning modes are available: seek tuning,
manual tuning and preset tuning.
Seek tuning
1.
Press the [BND] button and select
the
desired band (FM/AM).
* If "MANU" appears
in
the display, press and
hold
the
[BND] button
(1
sec.). "MANU" will
turn
off,
and
seek tuning will
be
enabled.
2.
Press
[~]
or
[~]
to automatically seek a
station.
Manual
tuning
2 modes are available: Quick tuning and step
tuning.
• Quick tuning
Press and hold
[~]
or
[~]
(1
sec.)
to
tune a
station.
• Step tuning
Press
[~]
or
[~]
to manually tune a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) can be used to store broadcast
stations
in
memory. Press the corresponding
[DIRECT] button to automatically recall the
stored frequency.