Instrukcja obsługi i instalacji Εγχειρίδιο Λειτουργίας & Εγκατάστασης CD/USB/MP3/WMA RECEIVER LECTEUR CD/USB/MP3/WMA CD/USB/MP3/WMA-RECEIVER SINTOLETTORE CD/USB/MP3/WMA CD/USB/MP3/WMA-ONTVANGER RECEPTOR CD/USB/MP3/WMA CD/USB/MP3/WMA-RECEIVER ODTWARZACZ CD/USB/MP3/WMA z interfejsem CD/USB/MP3/WMA ΔΕΚΤΗΣ
English Contents Thank you for purchasing this Clarion product. • Please fully read this owner’s manual before operating this equipment. • Check the contents of the enclosed warranty card and store it in a safe place with this manual. 1. FEATURES......................................................................................................................... 3 2. PRECAUTIONS..................................................................................................................
MP3/WMA compatible with ID3-TAG display Detachable Front Panel with 3.5mm Auxiliary Input USB available 4ch/2V RCA Output with Subwoofer Control and BEAT-EQ with 3 Band Parametric Equalizer Compatible with iPod ® / iPhone™ via USB English 1. FEATURES Expanding Systems Expanding audio features 4-Channel Amplifier USB Memory iPod/ iPhone Note: The items listed outside of the frames are the commercial products generally sold.
English 2. PRECAUTIONS WARNING For your safety, the driver should not operate the controls while driving. Also, while driving, keep the volume to a level at which external sounds can be heard. 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth.
USB Port For a longer service life, be sure to read the following cautions. • Do not allow any liquids on the set from drinks, umbrellas, etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage. • Do not let cigarettes burn the display. Doing so may damage or deform the body. • If a problem should occur, have the set inspected at your store of purchase.
English Remove the DCP The control panel can be detached to prevent theft. When detaching the control panel, keep it in the safety place and prevent scratches. We recommend taking the DCP with you when leaving the car. 1. P ress the [ ] button (2 sec.) to turn off the power. 2. Deeply push in [OPEN] button to unlock the DCP. 3. H old the side popped out, take off the DCP. Re-attach the DCP 1. Hold the DCP and ensure that the panel faces towards you.
English 3. CONTROLS Operational Panel [BAND] [MENU] Disc Slot [ ] TA [ , ] [PS/AS] [OPEN] [SOUND] [POWER/SRC] [TA] [1~6] [VOLUME] AUX Jack [ADJ] Names of Buttons [ / SRC] Key • Power / Toggle the audio source [VOLUME] Key • Adjust volume level / Confirm [BAND] Key • Select tuner band [TA] Key • Traffic announcement [MENU] Key • System menu [1~6] Key • [1] Key: Scan play / Preset station 1. • [2] Key: Repeat play / Preset station 2. • [3] Key: Random play / Preset station 3.
English 4. CAUTIONS ON HANDLING Handling Discs Handling Storage • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. Ball-point pen • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters.
English 5. OPERATIONS Basic Operations Note: • Be sure to read this chapter referring to the chapter “3. CONTROLS” CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Power on / off Notes: • Start the engine before using this unit. • Be careful about using this unit for a long time without running the engine.
Radio Operations English Select tuner as playing source Recall the stored stations Press [SRC] button once or more to enter radio mode. Press one numeric key among 1 to 6 on the panel to select the corresponding stored station. Select one radio band Press the [BAND] key on the panel to select one radio band among FM1, FM2, FM3, MW, LW. Manual tuning During manual tuning, the frequency will be changed in steps. Press the [ ]/[ ] key on the panel to tune in a higher / lower station.
Radio Data System Operations This unit has a built-in “Radio Data System” decoder system that supports broadcast stations transmitting “Radio Data System” data. When using the “Radio Data System” function, always set the radio to FM mode. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. * The factory default setting is “ON”. 1. Set to ADJ mode by long pressing [DISP] button. 2. Press the [ ] or [ ] button to select “AF”. 3.
English CD/MP3/WMA Operations This unit can play back MP3/WMA files Notes: • If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks). To disable DRM (Digital Rights Management) When using Windows Media Player 9/10/11, click on TOOL -> OPTIONS -> COPY MUSIC tab, then under COPY SETTINGS, unclick the Check box for COPY PROTECT MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility.
• Discs not bearing the or mark and CD-ROMs cannot be played by this unit. • Some CDs recorded in CD-R/CD-RW mode may not be usable. TEXT TEXT Pausing play 1. Press the [ 4 / ] button to pause play. “PAUSE” appears in the display. 2. To resume CD play, press the [ 4 / button again. ] Displaying CD titles This unit can display title data for MP3/WMA disc. When SCROLL is OFF, each time you press the [DISP] button to change the title display.
English CD/MP3/WMA Operations MP3/WMA: 1. Press the [RPT] button to perform repeat play, “TRACK RPT” appears on the display, and “RPT” segment lights on. 2. For MP3/WMA files, press [RPT] button again, “FOLDER RPT” appears on the display for folder repeat play. 3. Press [RPT] button trice to cancel repeat playback, “RPT OFF” appears on the display, and “RPT” segment goes off. Random play This function allows you to play all tracks recorded on a disc in a random order.
Press [SRC] button on the panel to select AUX. AUX is just for Audio content with 3.5mm Jack connector plugged into audio-in socket on the front panel. English AUX Operations AUX Input sensitivity setting 1. Press the [ADJ] button. 2. Turn the [VOL/SEL] knob to select “AUX MID”. 3. If the output level of connected external audio player is “High”, rotate [VOL/SEL] knob and choose “AUX LOW”. And if the output level is “Low”,choose “AUX HIGH”.
Audio Setup English Press the [SOUND] key to enter sound effect setting mode. First Press shows current EQ. Rotate the volume knob to changes BEAT EQ in this order: OFF -> B-BOOST -> IMPACT -> EXCITE -> CUSTOM Press the [SOUND] key, then press [ ] to select USER preset including: , BALANCE -> FADER -> M-B EX -> LPF(low pass filter) -> SUBW VOL, rotate the volume knob to select a value.
English 6. TROUBLE SHOOTING GENERAL Problem Unit can not power on Cause Measure Unit fuse blown. Install new fuse with correct rating. Car battery fuse blown. Install new fuse with correct rating. Turn off the power and open the operation panel. Press the reset button with a thin rod. Note: When the Reset button is pressed, turn off the ACC power.* Unit can not power on Nothing happens when buttons are Illegal operation. pressed. Display is not accurate.
USB Devices English Problem Cause USB device cannot be inserted. USB device is not recognized. Reversing the connection direction of the USB device, try it again. The USB connector is broken. Replace with a new USB device. The USB device is damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing with a different USB device. Connectors are loose. No sound heard with No MP3/WMA file is stored in the display “No File” the USB device. shown.
English 8. SPECIFICATIONS FM Tuner Input Frequency range: 87.5-108.0MHz Usable sensitivity: 8dBμ Frequency response: 30Hz-15kHz Stereo separation: 30dB(1kHz) Signal/noise ratio: >55dB Audio input sensitivity: High: 320mV (at 1V output) Mid: 650mV (at 1V output) Low: 1.3V (at 1V output) (input impedance 10 k or greater) Aux-in level: ≤2V MW Tuner General LW Tuner Frequency range: 153-279kHz Usable sensitivity (S/N=20dB): 30dBμ Power supply voltage: 14.4VDC (10.8 to 15.
English 9. INSTALLATION / WIRE CONNECTION GUIDE CONTENTS 1) BEFORE STARTING............................................................. 20 2) PACKAGE CONTENTS......................................................... 20 3) GENERAL CAUTIONS.......................................................... 20 4) CAUTIONS ON INSTALLATION............................................ 21 5) INSTALLING THE SOURCE UNIT........................................ 21 6) REMOVING THE SOURCE UNIT.................................
4) Cautions on Installation English 1. Prepare all articles necessary for installing the source unit before starting. 2. Install the unit within 30° of the horizontal plane. (Figure 2) 3. If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand. 4. Use the enclosed screws for installation. Using other screws can cause damage. (Figure 3) 5) Installing the Source Unit 1.
Notes of installation English 1. Before installation, please make sure proper connections are conducted and the unit operates normally. Improper connection may result in damage to the unit. 2. Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit. 3. Before installation, please fasten all power cables. 4. DO NOT install the unit in the place where close to hot area to prevent damage to electrical components such as the laser head.
6) Removing the Source Unit Method B Disassemble trim ring 1. Push the trim ring to right and pull out the right part. English 6 6 2. Push the trim ring to left and pull out the left part. 1. Insert this unit directly to the opening of the dashboard. 2. Place M5×6 cylindrical screw through the holes of the mounting frame located inside the opening to holes of the unit and fasten the screws to left & right. Disassemble the unit 1. Switch off the power. 2. Remove the panel. 3. Remove the trim ring.
7) Wiring and Connections English White Black Rear Left / SUB OUT 1 Black Red Rear Right / SUB OUT 2 Black USB connector Black Gray Red Rear audio output (Right) Subwoofer output 2 Front audio output terminal Left Right Black SWC Steering wheel control terminal White Rear audio output (Left) Subwoofer output 1 4 Channel Amplifier Fuse 15A ANTENNA (Black) C B 1 2 3 4 5 6 7 8 Refer to next page.
16 14 12 10 8 6 4 2 English A 1 3 5 7 Rear right Front right Front left + Rear left + 2 4 6 8 AMP Remote ACC + Ground C 15 13 11 9 7 5 3 1 B Rear right + Front right + Front left Rear left Illumination Phone Mute 1 3 5 7 2 4 6 8 Battery + Phone Mute / Brown Rear right (+) / Purple Rear right (-) / Purple with black stripe Front right (+) / Grey Battery 12V(+) / Yellow Remote On / Blue with white stripe Front right (-) / Grey with black stripe Illumination / Orange with white stripe ACC+ / Red
English: Español: Declaration of conformity Declaración de conformidad We Clarion declares that this model CZ200E/ CZ200ER/CZ200EG is following the provision of Directive 1999/5/EC with the essential requirements and the other relevant regulations. Clarion declara que este modelo CZ200E/ CZ200ER/CZ200EG cumple con los requisitos esenciales y otras disposiciones aplicables descritos en la Directiva 1999/5/CE.
