CX609E_EN.
CX609E_EN.book Page 2 Monday, January 19, 2009 4:28 PM CAUTIONS: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure.
CX609E_EN.book Page 3 Monday, January 19, 2009 4:28 PM English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents 1. FEATURES ................................................................................................................
CX609E_EN.book Page 4 Monday, January 19, 2009 4:28 PM English 1. FEATURES • Built in Bluetooth® handsfree (HFP) and audio streaming (A2DP & AVRCP) • BBE MP for compressed audio improvement • 728-Variable colour display & illuminated key 2. PRECAUTIONS This unit is applicable for on-road 4 wheel vehicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate.
CX609E_EN.book Page 5 Monday, January 19, 2009 4:28 PM English 3. CONTROLS Names of the Buttons and Their Main Functions Source unit [ [CD SLOT] ] [DIRECT] [DIRECT] [SCN] [RPT] [RDM] [IR RECEIVER] [ [DISP] ] [ [SRC] [ [ ] ], [ ] [ROTARY] ] button [ ], [ ] [TA] [BND] [AUX] [DISP] button • Perform preset scan while in radio mode. • Play or pause a track while in CD/MP3/WMA/ AAC/USB/iPod mode. • Switch display mode.
CX609E_EN.book Page 6 Monday, January 19, 2009 4:28 PM English 4. REMOTE CONTROL Functions of Remote Control Unit Buttons If you buy the RCB-176-301 sold separately, you can enjoy the use of the Remote control functions. ∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main unit.
CX609E_EN.book Page 7 Monday, January 19, 2009 4:28 PM Functions of Remote Control Unit Buttons [AF] button • AF function on and off. • Press and hold (1 sec.) for REG function on and off. [PTY] button • Press to perform repeat play. • When in MP3/WMA/AAC and USB/MTP modes, press and hold (1 sec.) for folder repeat play. • PTY mode on and off. [PTY] button ● CD/MP3/WMA/AAC and USB/MTP modes • Press to perform random play. • When in MP3/WMA/AAC and USB/MTP modes, press and hold (1 sec.
CX609E_EN.book Page 8 Monday, January 19, 2009 4:28 PM English 5. OPERATIONS Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5. Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. Turning on/off the power Note: 1. Press the [SRC] button to turn on the power. 2. Press and hold the [SRC] button (1 sec.) for to turn off the power. Selecting a mode 1.
CX609E_EN.book Page 9 Monday, January 19, 2009 4:28 PM Basic Operations 3-1. Press the [ ] button. 3-2. Press the [x] or [v] button to select the “BASS”/“MID”/“TREBLE” mode to adjust. 3-3. If you want to set the flat, press the [ ] button to return to the “CUSTOM” mode, then press and hold the [ ] button (1 sec.), bass/mid/treble characteristics become flat. When “EXCITE/IMPACT/B-BOOST” is set: 3-2. Press the [ ] button. 3-3. Press the [w] or [z] button to adjust the setting in the range of –3 to +3.
CX609E_EN.book Page 10 Monday, January 19, 2009 4:28 PM Basic Operations English 2-1. Select “S-W VOL”. 3-1. Press the [w] or [z] button to increases or decreases the subwoofer volume. ∗ The factory default setting is “0”. (Adjustment range: +6 to –6) ● Adjusting the HPF 2-1. Select “HPF”. 3-1. Press the [w] or [z] button to select as following order. “THROUGH” ↔ “60” ↔ “90” ↔ “120” ∗ The factory default setting is “THROUGH”.
CX609E_EN.book Page 11 Monday, January 19, 2009 4:28 PM Radio Operations 1. Press the [SRC] button and select the radio mode. The frequency or PS and PTY appears in the display. ∗ PS: Programme service name ∗ PTY: Programme type 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1... Tuning 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
CX609E_EN.book Page 12 Monday, January 19, 2009 4:28 PM Radio Data System Operations English Radio Data System This unit has a built-in “Radio Data System” decoder system that supports broadcast stations transmitting “Radio Data System” data. When using the “Radio Data System” function, always set the radio to FM mode. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. ∗ The factory default setting is “ON”. 1.
CX609E_EN.book Page 13 Monday, January 19, 2009 4:28 PM Radio Data System Operations ● Searching for a TP station When “TP” is not lit, if you press the [TA] button, “TA” in the display lights and the unit automatically receives a TP station. Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten.
CX609E_EN.book Page 14 Monday, January 19, 2009 4:28 PM Radio Data System Operations English Emergency broadcast If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emergency broadcast can be heard. ● Cancelling an emergency broadcast If you press the [TA] button, emergency broadcast reception is cancelled.
CX609E_EN.book Page 15 Monday, January 19, 2009 4:28 PM CD/MP3/WMA/AAC Operations Notes: • If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks). • Windows Media™, and the Windows® logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. ● To disable DRM (Digital Rights Management) 1.
CX609E_EN.book Page 16 Monday, January 19, 2009 4:28 PM CD/MP3/WMA/AAC Operations English 3. When setting is completed, remove the disc and reinsert it. Backup Eject function Just pressing the [Q] button, ejects the disc even if the power to the unit was not turned on. 1. Press the [ EJECT] button. Remove the disc after it is ejected. Notes: • If you force a CD into before auto reloading, this can damage the CD.
CX609E_EN.book Page 17 Monday, January 19, 2009 4:28 PM CD/MP3/WMA/AAC Operations ● Folder random play This function allows you to select a folder containing MP3/WMA/AAC files and start playing from the first track in the folder. 1. Press the [z] or [w] button. Press the [w] button to move the next folder. Press the [z] button to move the previous folder. 2. To select a track, press the [x] or [v] button.
CX609E_EN.book Page 18 Monday, January 19, 2009 4:28 PM Bluetooth Operations English The Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device.
CX609E_EN.book Page 19 Monday, January 19, 2009 4:28 PM Bluetooth Operations You can call a redial phone No. 1. Press the [BND] button to select “REDIAL”. 2. Press and hold the [ ] button (1 sec.) to call the redial phone No. ∗ Press the [ ] button to end the call. To change Bluetooth adjustment setting 1. Press and hold the [DISP] button (1 sec.) to switch to the Bluetooth adjustment selection display. 2. Press the [x] or [v] button to select the “item name”.
CX609E_EN.book Page 20 Monday, January 19, 2009 4:28 PM Bluetooth Operations English ● DISCONNECT ● PHONE BOOK TYPE This option is used to disconnect the currently connected device. 2-1. Select “DISCONNECT”. 3-1. Press and hold the [ ] button (1 sec.) to disconnect. The unit provide 3 types of phone book which are stored in memory. 2-1. Select “PHONE BOOK TYPE”. 3-1. Press the [ ] button. 3-2. Press the [w] or [z] button to select “1” , “2” or “3”, then press the [ ] button to store in memory.
CX609E_EN.book Page 21 Monday, January 19, 2009 4:28 PM Bluetooth Operations ● NOISE This option is used to set noise volume in the car bluetooth system. 2-1. Press “NOISE”. 3-1. Press the [w] or [z] button to select “LOW” or “HIGH”. ∗ The factory default setting is “LOW”. ● AUTO ANS This is a setting to determine whether any incoming call will be automatically or manually answered. ∗ The factory default setting is “OFF”. 2-1. Select “AUTO ANS”. 3-1. Press the [w] or [z] button to select “ON” or “OFF”.
CX609E_EN.book Page 22 Monday, January 19, 2009 4:28 PM Operations Common to Each Mode English To change adjustment setting 1. Press and hold the [DISP] button (1 sec.) to switch to the adjustment selection display. 2. Press the [x] or [v] button to select the “item name”. “CONTRAST” ↔ “SETTINGS” ↔ “COLOR” ↔ “CODE” ↔ “SCRN SVR” ↔ “MESSAGE INPUT” ↔ “SCROLL” ↔ “DIMMER” ↔ “BLINKLED” ↔ “A-CANCEL” ↔ “INT-SW” ↔ “REAR/ S-W” ↔ “SYSTEM CHECK” 3. Press the [w] or [z] button to select the “desired setting value”.
CX609E_EN.book Page 23 Monday, January 19, 2009 4:28 PM Operations Common to Each Mode 1. Enter your Personal Code currently set. 2. When the correct Personal Code is entered, the unit will restart from the initial startup screen. Notes: • When you enter a wrong Personal Code, the message “LOCK - - - -” is displayed and the Personal Code entry is prohibited for a while.
CX609E_EN.book Page 24 Monday, January 19, 2009 4:28 PM Operations Common to Each Mode English ● Cellular phone interrupt setting If you connect this unit and your cellular phone with a separately sold cable, you can listen to your telephone calls on your car speakers. ∗ The factory default setting is “OFF”. 2-1. Select “INT-SW”. 3-1. Press the [w] or [z] button to select the setting.
CX609E_EN.book Page 25 Monday, January 19, 2009 4:28 PM English 6. ACCESSORIES USB/MTP Operations USB memory/MTP device operation Note: • The following operations are the same as for CD mode: ∗ Pause ∗ Track selection ∗ Fast-forward/reverse (Except DRM file) ∗ Top function ∗ List search function ∗ Scan play ∗ Repeat play ∗ Random play ∗ Folder selection See “CD/MP3/WMA/AAC Operations” (page 1517) for details.
CX609E_EN.book Page 26 Monday, January 19, 2009 4:28 PM USB/MTP Operations English • Do not turn on vehicle ignition when the MTP device is connected, since it may result in loss or damage to data on the MTP device. Connect the MTP device to the USB cable after vehicle ignition is turned on. Connecting a USB memory/MTP device 1. Connect the USB memory/MTP device to the USB cable. Playback will begin from the first file recorded on the device.
CX609E_EN.book Page 27 Monday, January 19, 2009 4:28 PM iPod Operations Notes: • See the iPod Owner’s Manual for details regarding operation conditions. • The unit will not operate, or may operate improperly with unsupported versions. • For a list of compatible Apple iPod unit with the this model, please contact your Clarion dealer or www.clarion.com.
CX609E_EN.book Page 28 Monday, January 19, 2009 4:28 PM iPod Operations English ● All random play Play all tracks within a selected category, in random order. (Corresponds to “Shuffle (Songs)” command on iPod.) 1. Press and hold the [RDM] button (1 sec.). ● To cancel play 1. Press the same play button once again. Notes: • When the repeat play mode is canceled, after play all tracks within a selected category, playback will begin from the first track in the selected category.
CX609E_EN.book Page 29 Monday, January 19, 2009 4:28 PM iPod Operations English Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled. ∗ Use the [w] or [z] buttons to select a track within a category. iPod menu list back In the iPod menu operation mode: ∗ If press the [BND] button, it will return to the previous subfolder list mode. ∗ If press and hold the [BND] button (1 sec.), it will return to the category list mode.
CX609E_EN.book Page 30 Monday, January 19, 2009 4:28 PM General Problem Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Nothing happens when buttons are pressed. Display is not accurate. No sound heard No sound heard CD/MP3/WMA/AAC English 7. TROUBLESHOOTING 30 Sound skips or is noisy. Sound is cut or skipped. Noise is generated or noise is mixed with sound. Sound is bad directly after power is turned on.
CX609E_EN.book Page 31 Monday, January 19, 2009 4:28 PM USB/MTP/iPod Cause The device contains no MP3/ WMA/AAC files. The files are not proper MP3/ WMA/AAC format. Connectors are loose. Some USB portable music players may consume current that exceeds the USB rating. In this case, the unit’s overcurrent protection circuit operates to stop the music playback. Sound is The MP3/WMA/AAC files are interrupted or has improperly encoded. noise. The device isn’t The device is damaged. recognized.
CX609E_EN.book Page 32 Monday, January 19, 2009 4:28 PM English 9. SPECIFICATIONS Radio section General Tuning System: PLL synthesizer tuner Receiving Frequencies: FM : 87.5 to 108 MHz (0.05 MHz steps) MW : 531 to 1602 kHz (9 kHz steps) LW : 153 to 279 kHz (3 kHz steps) Output Power: 25 W ✕ 4 (DIN 45324, +B=14.4V) Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative ground Power Consumption: Less than 15 A Speaker Impedance: 4 Ω (4 to 8 Ω allowable) Weight: Main unit: 1.
CX609E_PO.book Page 275 Monday, February 9, 2009 4:35 PM TEL :+49-6105-977-0 FAX :+49-6105-977-399 High-Tech High-Touch » DICHIARAZIONE DI CONFORMI CONFORMITA’ « (D.M.
CX609E_PO.book Page 276 Monday, February 9, 2009 4:35 PM TEL:+49-6105-977-0 FAX:+49-6105-977-399 CE DECLARATION of CONFORMITY Document No.
