CX609A_ENG.
CX609A_ENG.book Page 3 Thursday, February 12, 2009 9:36 AM English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents 1. FEATURES ...................................................................................................................................... 3 2. PRECAUTIONS ................................................
CX609A_ENG.book Page 4 Thursday, February 12, 2009 9:36 AM English 2. PRECAUTIONS CAUTION USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
CX609A_ENG.book Page 5 Thursday, February 12, 2009 9:36 AM English 3. CONTROLS Names of the Buttons and Their Main Functions [DIRECT] [CD SLOT] [ ] [SCN] [RPT] [DIRECT] [RDM] [IR RECEIVER] [ ] [DISP] [BND] [SRC] [AUX] [ ] [ROTARY] [ [ISR] [w], [z] [x], [v] ] button • Perform preset scan while in the radio mode. • Play or pause a track while in CD/MP3/WMA/ AAC/USB/iPod mode. [IR RECEIVER] [DISP] button • Switch the display indication.
CX609A_ENG.book Page 6 Thursday, February 12, 2009 9:36 AM English 4. REMOTE CONTROL Functions of Remote Control Unit Buttons ∗ If you buy the RCB-176-200 sold separately, you can enjoy the use of the Remote Control function. ∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main unit. Signal transmitter ● Radio mode [BND] button • Switches reception band. [x], [v] buttons [SRC] [BND] • Moves preset channels up and down.
CX609A_ENG.book Page 7 Thursday, February 12, 2009 9:36 AM Functions of Remote Control Unit Buttons English ● iPod mode [x], [v] buttons [RPT] button • Press to move the tracks up and down. • Press and hold the button (1 sec.) to perform fast-forward/fast-reverse. • Press to perform repeat play. [ ] button • Switches between playback and pause. [RDM] button • Press to perform random play. • Press and hold the button (1 sec.) to perform all random play.
CX609A_ENG.book Page 8 Thursday, February 12, 2009 9:36 AM English 5. OPERATIONS Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5. Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. Turning on/off the power 1. Press the [SRC] button to turn on the power. 2. Press and hold the [SRC] button (1 sec.) to turn off the power for the unit.
CX609A_ENG.book Page 9 Thursday, February 12, 2009 9:36 AM Basic Operations 3-1. Press the [ ] button. 3-2. Press the [x] or [v] button to select the “BASS”, “MID” or “TREBLE” mode to adjust. 3-3. If you want to set the flat, press the [ ] button to return to the “CUSTOM” mode, then press and hold the [ ] button (1 sec.), bass/mid/treble characteristics become flat and switch to the “CUSTOM” mode. When “EXCITE/IMPACT/B-BOOST” is set: 3-1. Press the [ ] button. 3-2.
CX609A_ENG.book Page 10 Thursday, February 12, 2009 9:36 AM Basic Operations English 3-1. Each time press the [w] or [z] button to select the setting, the setting changes in the following order: “THROUGH” ↔ “60” ↔ “90” ↔ “120” ∗ The factory default setting is “THROUGH”. ● Adjusting the subwoofer output volume You can adjust the volume output from the unit’s subwoofer output terminal. This adjustment can be performed only when the “REAR/S-W” is set to “S-WOOFER”. 2-1. Select “S-W VOL”. 3-1.
CX609A_ENG.book Page 11 Thursday, February 12, 2009 9:36 AM Radio Operations Auto store 1. Press the [SRC] button and select the radio mode. 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
CX609A_ENG.book Page 12 Thursday, February 12, 2009 9:36 AM CD/MP3/WMA/AAC Operations English MP3/WMA/AAC ● To disable DRM (Digital Rights Management) 1. When using Windows Media Player 9/10/11, click on TOOL ➜ OPTIONS ➜ MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility. 2.
CX609A_ENG.book Page 13 Thursday, February 12, 2009 9:36 AM CD/MP3/WMA/AAC Operations As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on. CAUTION • Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.
CX609A_ENG.book Page 14 Thursday, February 12, 2009 9:36 AM CD/MP3/WMA/AAC Operations English Fast-forward/fast-reverse ● Folder repeat play ● Fast-forward 1. Press and hold the [v] button (1 sec.). ● Fast-reverse 1. Press and hold the [x] button (1 sec.). This function allows you to play a track currently being played in the MP3/WMA/AAC folder repeatedly. 1. Press and hold the [RPT] button (1 sec.) to perform folder repeat play.
CX609A_ENG.book Page 15 Thursday, February 12, 2009 9:36 AM Bluetooth Operations Notes: • Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction. In addition, if leave it in the places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction. • This system will not operate or may operate improperly with some Bluetooth audio players.
CX609A_ENG.book Page 16 Thursday, February 12, 2009 9:36 AM Bluetooth Operations English 4. Press the [ phone No. ] button to call the mobile ● Redial a call You can call a redial phone No. 1. Press the [BND] button to select “REDIAL”. 2. Press and hold the [ ] button (1 sec.) to call the redial phone No. ∗ Press the [ ] button to end the call. To change Bluetooth adjustment setting 1. Press and hold the [DISP] button (1 sec.) to switch to the Bluetooth adjustment selection display. 2.
CX609A_ENG.book Page 17 Thursday, February 12, 2009 9:36 AM Bluetooth Operations This option is used to add one of the phone No. 2-1. Select “ADD PHONE BOOK”. 3-1. Press the [ ] button (1 sec.), then the “RECEIVING” appears in the display. ∗ At the same time the phone No. from the paired phone book list is sent out, then there is a prompt on the mobile phone if it is successful. ∗ Some mobile phones cannot transfer the phone book to this unit because of the less word and the language type.
CX609A_ENG.book Page 18 Thursday, February 12, 2009 9:36 AM Bluetooth Operations English ● AUTO ANS ● Bluetooth Firmware version This is a setting to determine whether any incoming call will be automatically or manually answered. This will display the Firmware version of the Bluetooth. 2-1. Select “BT FW”. The Bluetooth Firmware version appears in the display. ∗ The factory default setting is “OFF”. 2-1. Select “AUTO ANS”. 3-1. Press the [w] or [z] button to select “ON” or “OFF”.
CX609A_ENG.book Page 19 Thursday, February 12, 2009 9:36 AM Operations Common to Each Mode 1. Press and hold the [DISP] button (1 sec.) to switch to the adjustment selection display. 2. Press the [x] or [v] button to select the “item name”. “CLOCK” ↔ “CONTRAST” ↔ “SETTINGS” ↔ “COLOR” ↔ “CODE” ↔ “SCRN SVR” ↔ “MESSAGE INPUT” ↔ “SCROLL” ↔ “DIMMER” ↔ “BLINKLED” ↔ “A-CANCEL” ↔ “REAR/S-W” ↔ “SYSTEM CHECK” 3. Press the [w] or [z] button to select the “desired setting value”.
CX609A_ENG.book Page 20 Thursday, February 12, 2009 9:36 AM Operations Common to Each Mode English 5-1. Press and hold the [ ] button (2 sec.) The entered Personal Code will be set, and it will return to the previous screen. Note: • Write down your Personal Code in case you forget it. • Erasing the Personal Code 2-1. Select “CODE”. 3-1. Press the [ ] button. The ERASE PERSONAL CODE screen appears. 4-1. Enter the Personal Code currently. 5-1. Press and hold the [ ] button (2 sec.) or longer.
CX609A_ENG.book Page 21 Thursday, February 12, 2009 9:36 AM Operations Common to Each Mode ● Performing a system check Set how to scroll in CD-TEXT, MP3/WMA/AAC title. This function allows you to perform a system check from the adjust mode when required. 2-1. Select “SYSTEM CHECK”. 3-1. Press and hold the [ ] button (1 sec.). “SYSTEM CHECK” appears in the display, then the unit returns to the previous operation mode. ∗ The factory default setting is “ON”. 2-1. Select “SCROLL”. 3-1.
CX609A_ENG.book Page 22 Thursday, February 12, 2009 9:36 AM Operations Common to Each Mode English Clearing titles 1. Select and play a CD or tune in Radio for which you want to clear the title. 2. Press and hold the [DISP] button (1 sec.). 3. Press the [x] or [v] button to select “TITLE INPUT”. 4. Press the [ ] button. The display switches to the title input display. 5. Press and hold the [BND] button (1 sec.). All characters in the title disappear. 6. Press and hold the [ ] button (2 sec.
CX609A_ENG.book Page 23 Thursday, February 12, 2009 9:36 AM English 6. ACCESSORIES USB/MTP Operations USB memory/MTP device operation Note: • The following operations are the same as for CD mode: ∗Pause ∗Track selection ∗Fast-forward/fast-backward (Except DRM file) ∗Top function ∗List search ∗Scan play ∗Repeat play ∗Random play ∗Folder selection See “CD/MP3/WMA/AAC Operations” (page 1214) for details. • • • • through a USB hub device are also not supported.
CX609A_ENG.book Page 24 Thursday, February 12, 2009 9:36 AM USB/MTP Operations English • Do not turn on vehicle ignition when the MTP device is connected, since it may result in loss or damage to data on the MTP device. Connect the MTP device to the USB cable after vehicle ignition is turned on. Connecting a USB memory/MTP device 1. Connect the USB memory/MTP device to the USB cable. Playback will begin from the first file recorded on the device.
CX609A_ENG.book Page 25 Thursday, February 12, 2009 9:36 AM iPod Operations Notes: • See the iPod Owner’s Manual for details regarding operation conditions. • The unit will not operate, or may operate improperly with unsupported versions. • For a list of compatible Apple iPod unit with the this model, please contact your Clarion dealer or www.clarion.com.
CX609A_ENG.book Page 26 Thursday, February 12, 2009 9:36 AM iPod Operations English ● All random play Play all tracks within a selected category, in random order. (Corresponds to “Shuffle (Songs)” command on iPod.) 1. Press and hold the [RDM] button (1 sec.). ● To cancel play 1. Press the same play button once again. Notes: • When the repeat play mode is canceled, after play all tracks within a selected category, playback will begin from the first track in the selected category.
CX609A_ENG.book Page 27 Thursday, February 12, 2009 9:36 AM iPod Operations English 3. When the track name display is showing, press the [v] button. Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled. ∗ Use the [w] and [z] buttons to select a track within a category. iPod menu list back In the iPod menu operation mode: If press the [BND] button, it will return to the previous subfolder list mode. If press and hold the [BND] button (1 sec.
CX609A_ENG.book Page 28 Thursday, February 12, 2009 9:36 AM Problem General English 7. TROUBLESHOOTING Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is 1. Turn the unit off. shorted to ground or 2.
CX609A_ENG.book Page 29 Thursday, February 12, 2009 9:36 AM Problem CD/MP3/WMA/AAC Measure English No sound heard Cause MP3/WMA/AAC files are absent in a disc. Write MP3/WMA/AAC files onto the disc properly. Files are not recognized as an MP3/WMA/AAC file. Use MP3/WMA/AAC files encoded properly. File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo or APPLE ISO file system. Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft cloth.
CX609A_ENG.book Page 30 Thursday, February 12, 2009 9:36 AM If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. CD/MP3/WMA/AAC Error Display USB/MTP/iPod English 8. ERROR DISPLAYS Cause Measure ERROR 2 A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult deck and is not ejected. your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc.
CX609A_ENG.book Page 31 Thursday, February 12, 2009 9:36 AM FM Tuner Audio Frequency Range: 87.0 MHz to 108.
CX609A_BI.book Page 120 Wednesday, February 11, 2009 1:35 PM Clarion Co., Ltd. 2009/02 All Rights Reserved. Copyright © 2009: Clarion Co., Ltd.
