CX201A_ENG.
CX201A_ENG.
CX201A_ENG.book Page 3 Friday, January 14, 2011 2:13 PM Contents 1. FEATURES ...................................................................................................................................... 3 2. PRECAUTIONS ............................................................................................................................... 4 3. CONTROLS .....................................................................................................................................
CX201A_ENG.book Page 4 Friday, January 14, 2011 2:13 PM English 2. PRECAUTIONS Handling Compact Discs • Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car. • Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.
CX201A_ENG.book Page 5 Friday, January 14, 2011 2:13 PM English 3. CONTROLS Names of the Buttons and Their Main Functions [CD SLOT] CX201A [ ] [DIRECT] [DIRECT] [SCN] [RPT] [F-UP] [RDM] [IR RECEIVER] [F-DN] [SOURCE] [BAND] [x] [ [v] [RESET ] [AUX] ] [SOUND] [DISP] [ROTARY ] [ISR ] [USB] [DIRECT] buttons [SOUND] button • Store radio stations in memory or recall it directly while in radio mode. • Press to switch to the sound adjust mode. [SCN] button • Switch display mode.
CX201A_ENG.book Page 6 Friday, January 14, 2011 2:13 PM English 4. REMOTE CONTROL Functions of Remote Control Unit Buttons If you buy the RCB-176-200 sold separately, you can enjoy the use of the Remote Control function. ∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main unit. Signal transmitter ● Radio mode [BND] button • Switches reception band. [x], [v] buttons [SRC] [BND] • Moves preset channels up and down.
CX201A_ENG.book Page 7 Friday, January 14, 2011 2:13 PM Functions of Remote Control Unit Buttons [RPT] button [x], [v] buttons • Press to perform repeat play. • Press to move the tracks up and down. • Press and hold the button (1 sec.) to perform fast-forward/fast-reverse. [RDM] button [ ] button • Press to perform random play. • Press and hold the button (1 sec.) to perform all random play. • Switches between playback and pause.
CX201A_ENG.book Page 8 Friday, January 14, 2011 2:13 PM English 5. OPERATIONS Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5. Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. Turning on/off the power 1. Press the [SOURCE] button to turn on the power. 2. Press and hold the [SOURCE] button (1 sec.) to turn off the power for the unit.
CX201A_ENG.book Page 9 Friday, January 14, 2011 2:13 PM Basic Operations ∗ The factory default setting is “0”. 3-3. Press the [ROTARY] knob to return to the previous mode. ● Adjusting the BASS/MID/TREBLE This adjustment can be performed only when the BEAT EQ is set to “CUSTOM”. Note: • While connected with the external amplifiers, please do not set the “BASS/MID/TREBLE” in the maximum level. Otherwise the speakers may be damaged. 3-1. Press the [ROTARY] knob. 3-2.
CX201A_ENG.book Page 10 Friday, January 14, 2011 2:13 PM Basic Operations English 3-1. Each time you turn the [ROTARY] knob to select the setting, the setting changes in the following order: “THROUGH” ↔ “60” ↔ “90” ↔ “120” ∗ The factory default setting is “THROUGH”. ● Adjusting the subwoofer output volume You can adjust the volume output from the unit’s subwoofer output terminal. This adjustment can be performed only when the “REAR/S-W” is set to “S-WOOFER”. 2-1. Select “S-W VOL”. 3-1.
CX201A_ENG.book Page 11 Friday, January 14, 2011 2:13 PM Radio Operations Auto store 1. Press the [SOURCE] button and select the radio mode. 2. Press the [BAND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
CX201A_ENG.book Page 12 Friday, January 14, 2011 2:13 PM CD/MP3/WMA Operations English MP3/WMA This unit can play back MP3/WMA files. Note: • If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks). ● To disable DRM (Digital Rights Management) 1. When using Windows Media Player 9/10/11, click on TOOL ➜ OPTIONS ➜ MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files.
CX201A_ENG.book Page 13 Friday, January 14, 2011 2:13 PM CD/MP3/WMA Operations As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on. CAUTION • Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.
CX201A_ENG.book Page 14 Friday, January 14, 2011 2:13 PM CD/MP3/WMA Operations English Fast-forward/fast-reverse ● Folder repeat play ● Fast-forward 1. Press and hold the [v] button (1 sec.). ● Fast-reverse 1. Press and hold the [x] button (1 sec.). This function allows you to play a track currently being played in the MP3/WMA folder repeatedly. 1. Press and hold the [RPT] button (1 sec.) to perform folder repeat play.
CX201A_ENG.book Page 15 Friday, January 14, 2011 2:13 PM Operations Common to Each Mode 1. Press and hold the [DISP] button (1 sec.) to switch to the adjustment selection display. 2. Press the [x] or [v] button to select the “item name”. “CLOCK” ↔ “CONTRAST” ↔ “CODE” ↔ “SCRN SVR” ↔ “SCROLL” ↔ “DIMMER” ↔ “BLINKLED” ↔ “REAR/S-W” ↔ “INT-SW” ↔ “RESET” 3. Turn the [ROTARY] knob to select the “desired setting value”.
CX201A_ENG.book Page 16 Friday, January 14, 2011 2:13 PM Operations Common to Each Mode English • When the ENTER PERSONAL CODE screen appears The ENTER PERSONAL CODE screen will be displayed when turning the ACC power on after performing the following operations: • The car battery was replaced. • The backup power was cut off. • The [RESET] button was pressed. Note: • If you have lost your Personal Code, please contact Clarion customer service. • ON: To scroll automatically.
CX201A_ENG.book Page 17 Friday, January 14, 2011 2:13 PM Operations Common to Each Mode English ● Performing memory reset This function allows you to reset adjusted settings in the memory. The stored settings like last operation mode, volume setting, preset channels, MAGNA BASS EXTEND setting, adjust mode settings and sound mode settings can be formatted by this function. Note: • The settings will remain in the memory even if you turn the power off or press the reset button. 2-1. Select “RESET”. 3-1.
CX201A_ENG.book Page 18 Friday, January 14, 2011 2:13 PM English 6. ACCESSORIES USB Operations USB memory device operation Note: • The following operations are the same as for CD mode: ∗Pause ∗Track selection ∗Fast-forward/fast-backward (Except DRM file) ∗Scan play ∗Repeat play ∗Random play ∗Folder selection See “CD/MP3/WMA Operations” (pages 12-14) for details. About USB memory • USB is an acronym for Universal Serial Bus, and refers to an external bus standard supporting data transfer rates of 12 Mbps.
CX201A_ENG.book Page 19 Friday, January 14, 2011 2:13 PM USB Operations 1. Connect the USB memory device to the USB connector. Playback will begin from the first file recorded on the device. ∗ When a USB device is connected, it will switch to USB mode automatically. If the device is not recognized, press the [SOURCE] button to switch the source to the device. ∗ Always insert the device fully into the connector. Incomplete connections may cause the device not to be recognized.
CX201A_ENG.book Page 20 Friday, January 14, 2011 2:13 PM iPod/iPhone Operations English This section describes operations when connected to an Apple iPod via the USB cable. iPod can be connected by using the connector cable supplied with the iPod, but in this case, you can enjoy its audio sound only. To enjoy video movies stored in the iPod with video displaying them on this unit, it is required to use the special monitor and connector cable (CCA-723/CCA-748) separately sold.
CX201A_ENG.book Page 21 Friday, January 14, 2011 2:13 PM iPod/iPhone Operations Play back one track repeatedly. 1. Press the [RPT] button. ● Random play Play all albums within a selected category, in random order. (Corresponds to “Shuffle (Albums)” command on iPod.) 1. Press the [RDM] button. ● All random play Play all tracks within a selected category, in random order. (Corresponds to “Shuffle (Songs)” command on iPod.) 1. Press and hold the [RDM] button (1 sec.). ● To cancel play 1.
CX201A_ENG.book Page 22 Friday, January 14, 2011 2:13 PM iPod/iPhone Operations English iPod menu alphabet search This function searches the subfolders for desired alphabetical letters. 1. Press the [BAND] button to select the iPod menu mode. 2. Turn the [ROTARY] knob to switch between categories. 3. Press the [ROTARY] knob. ∗ Subfolders may be displayed, depending on the category.
CX201A_ENG.book Page 23 Friday, January 14, 2011 2:13 PM Problem General Power does not turn on. (No sound is produced.) Cause Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is 1. Turn the unit off. shorted to ground or 2.
CX201A_ENG.book Page 24 Friday, January 14, 2011 2:13 PM Problem English CD/MP3/WMA No sound heard Cause Measure MP3/WMA files are absent in Write MP3/WMA files onto the disc properly. a disc. Files are not recognized as an MP3/WMA file. Use MP3/WMA files encoded properly. File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo or APPLE ISO file system. Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft cloth.
CX201A_ENG.book Page 25 Friday, January 14, 2011 2:13 PM English 8. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. USB/iPod CD/MP3/WMA Error Display Cause Measure ERROR 2 A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult deck and is not ejected. your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc.
CX201A_ENG.book Page 26 Friday, January 14, 2011 2:13 PM English 9. SPECIFICATIONS FM Tuner Audio Frequency Range: 87.5 MHz to 108.
CX201A_026-038.fm Page 28 Friday, January 14, 2011 3:15 PM Clarion Co., Ltd. 2011/01 All Rights Reserved. Copyright © 2011: Clarion Co., Ltd.
