User Guide

Page 4 - CS150 Owner’s Manual
CS150 Owner’s Manual - Page 4
Valet Mode
Allows you to temporarily disable the remote starting feature when the car is being serviced or
turned over to a parking attendant.
To turn Valet Mode on:
1. Turn on the ignition.
2. Within 5 seconds, press and hold the Valet button for 3 seconds.
• The LED will turn on solid.
• The parking lights will flash once.
To turn Valet Mode off:
1. Turn on the ignition.
2. Within 5 seconds, press and hold the Valet button for 3 seconds.
• The LED will turn off.
• The parking lights will flash twice.
While Valet Mode is on, you can continue to lock and unlock the doors with the Remote
Transmitters, as well as operate the optional Auxiliary Function.
Stop and Go
The Stop and Go Feature allows you to remove the ignition key and exit the vehicle while keeping
the engine running during short stops.
To leave the vehicle running:
1. Press the Brake Pedal and hold.
2. While pressing the Brake Pedal, push Button 1 on the Remote Transmitter.
• The LED will flash rapidly.
• The parking lights will flash four times.
3. Release the Brake Pedal.
4. Remove the key from the ignition switch.
5. You may now exit the vehicle and lock the doors manually or using the Remote
Transmitter
To re-enter the vehicle and resume driver control:
1. Unlock the doors manually or by pressing Button 1 on the Remote Transmitter*.
2. T urn on the ignition .
3. Press the Brake Pedal to disengaged the CS150.
• The LED will turn off.
*If optional keyless entry feature is installed.
Auto Cold Starting
The Auto Cold Starting Feature allows the vehicle to automatically start the vehicle every two
hours and run for the preset Run Time.
To turn on Auto Cold Starting:
1. Press and hold Button 1 for 5 seconds.
• The parking lights will flash 5 times.
• The engine will start and run for 30 seconds.
• The LED will emit double flashes.
owners_150.qxd 7/26/99 7:27 PM Page 4