Operation Manual

31
CMV1
English
AUX Operations
This function is available when a VTR, etc. is connected to the AUX terminal.
Selecting the AUX mode
1. Press the [AUX/iPod] button to select AUX1
or AUX2.
Changing the audio input level
The input audio level of the AUX terminals can be
changed.
• The factory default setting is “Mid”.
1. Press the [OPTION] button.
2. Turn the [UP/DOWN] knob to select “AUX
Sense”.
3.Press the [ENTER] button.
4. Turn the [UP/DOWN] knob to select “Low”,
“Mid” or “High”.
5. Press the [ENTER] button.
CD Changer Operations
CD changer functions
When an optional CD changer (additional
DCZ625 CeNET changer required) is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [DISC] button to select the CD changer
mode to start play. If 2 CD changers are
connected, press the [DISC] button to select the
CD changer for play.
* If “No Magazine” appears on the display, insert
the magazine into the CD changer. “Disc Check”
appears on the display while the player loads
(checks) the magazine.
* If “No Disc” appears on the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
Depending on the recording format, CD-ROM
discs may not play properly.
Pausing play
1. Press and hold the [ ] button (1 sec.) to
pause play.
2. To resume CD play, press and hold the [ ]
button (1 sec.) again.
Selecting a track
● Track-up
1. Press the [V] button to move ahead to the
beginning of the next track.
2. Each time you press the [V] button, the track
advances ahead to the beginning of the next
track.
● Track-down
1. Press the [X] button to move back to the
beginning of the current track.
2. Press the [X] button twice to move to the
beginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
Press and hold the [V] button for 1 second or
longer.
● Fast-backward
Press and hold the [X] button for 1 second or
longer.
Selecting a CD
1. Turn the [UP/DOWN] knob to select the
desired disc.
* If a CD is not loaded in a slot of magazine,
turning the [UP/DOWN] knob can not work.
280PE3260E_EN.book Page 31 Tuesday, March 24, 2009 3:41 PM