Operation Manual

16
CMV1
English
DVD Video Operations
Selecting the DVD Video mode
1. Set a DVD video disc to the DVD player.
The system will automatically read the disc
data, change to the DVD mode (DVD Video
mode), and start playback after a while.
See also “Setting/Ejecting a Disc” (page 11).
● When a DVD video disc is already set
1. Press the [DISC] button to select the DVD
Video mode.
The system changes to the DVD mode (DVD
Video mode), and starts playback from the
previous position.
● Setting up the screen size
Set up the screen size according to the optional
rear monitor which is connected to this unit.
• The factory default setting is “Wide”.
• When watching through a wide type of the
rear monitor (16:9)
Wide:
• When watching through a conventional
type of the rear monitor (4:3)
Pan Scan:
The leftmost and rightmost areas of the screen
are cut off.
This function allows displaying the important
part of image fully on the screen. In some
cases, image is displayed
while being panned
(scrolled).
Letter Box:
A black zone is created in the top and bottom
areas of the screen.
This method displays Cinema Scope and Vista
Vision images without cutting them off by
creating a black zone on the top and bottom
gaps.
WARNING
• Some videos may be recorded at a higher
volume level than desired. Increase the
volume gradually from the minimal
setting after the video has started.
Changing the DVD System
Settings
Note:
• If the Setup operation is performed in the middle
of DVD video play, the disc will restart from
beginning.
1. Press and hold the [OPTION] button to
switch to the setup menu.
2. Turn the [UP/DOWN] knob to select the
item.
TV Display ↔ Angle ↔ Menu
Language ↔ Audio Language ↔
Subtitle Language ↔ Password ↔
Country Code ↔ Parental Level ↔
NTSC/PAL
3.Press the [ENTER] button.
4. Turn the [UP/DOWN] knob to select a
setting.
5. Press the [ENTER] button.
6. Press the [RETURN] button to return to the
previous mode.
• In the following sections, only the details
of settings are descr
ibed, the procedures
to select items are skipped.
3-1. Select “TV Display”.
4-1. Press the [ENTER] button.
5-1. Turn the [UP/DOWN] knob to select “Wide”,
“PS”, or “LB” of the TV
Display item to change the screen size to
“Wide”, “Pan Scan” or “Letter Box”.
280PE3260E_EN.book Page 16 Tuesday, March 24, 2009 3:41 PM