Owner`s manual

XM Satellite Radio Operations
English
30 CMD6
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Press and hold the [SAT] button (1 sec.) to
select the category selection mode.
∗ It press once again, return to the channel
selection mode.
2. Turn the [UP/DOWN] knob to change the
category item.
3. Press the [X] or [V] button to tune in a
station.
Notes:
• When the category selection mode is entered,
the category of the last received channel is
displayed first.
• The category selection mode is canceled when
no channel with the selected category can be
found.
•The [X] or [V] button are not pressed within
7 seconds, the category selection mode is
canceled, and resumes to the channel mode.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
∗ This function is available in the channel selection
mode.
● Preset scan (PRESET SCN)
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Press the [OPTION] button.
2. Press the [X] or [V] button to select
“PRESET SCN”.
3. Press the [ENTER] button.
And start the preset scanning.
● Category scan (CAT SCN)
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Press the [OPTION] button.
2. Press the [X] or [V] button to select “CAT
SCN”.
3. Press the [ENTER] button.
And start the category scanning.
Note:
• Category scanning is not available when no
category is defined for the current channel.
CMD6_ENG.book Page 30 Friday, February 20, 2009 10:51 AM