CNtDS WATERTIGHTMARINEAM/FM/CD/MP3IWMAMULTIMEDIA CONTROLLER COMBINENAUT~QUEETANCHE RADIOAM/FM...
lmmI This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model properly, read this Owner's Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest "AUTHORIZED service station". To prevent direct exposure to the laser beam, do not try to open the enclosure.
I( I~ CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com ~ I \ I~ ~ ~ Dear Customer: Congratulations on your purchase of a Clarion mobile electronic product. We are confident that you'll enjoy your Clarion experience. ~~ There are many benefits to registering your product. We invite you to visit our website at ~ www.clarion.com to register your Clarion product. I~ I l I~ I I ~~ We have made product registration simple with our easy to use website.
When it is very cold, the disc and the optical components may become fogged and not operate properly. Wipe fogged discs with a soft cloth. Fogged optical components will naturally return to normal when the unit is left for about one hour, after which it will operate normally. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Handling Compact Discs U Use only compact discs bearing the ~Q~~ or mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R/CD-RW mode may not be usable. Handling • Compared to ordinary music CDs, CD-R and CD-RW discs are easily affected by high temperature and humidity. Prolonged exposure to high heat and humidity may make the discs unplayable. Therefore, do not leave them for a long time in the boat. • New discs may Ball-point pen have rough edges.
With the front panel opened /,.,. [CD SLOT] &~~~~~~~~~~~~~~~;",\;",l~\""=====~~ 000 l600 _-----------:.
Names of the Buttons and their Functions [DISC] (CD/CD changer) button • Use to switch to CO/MP3 or CD changer mode. [SAT] (Satellite) button • Use to switch to Satellite mode. • Switch the band. [AM/FM] button • Use to switch to Tuner mode or TV mode. • Switch the band. • Press and hold the button to switch to seek or manual tuning. [BASS] knob • Adjust the bass by turning the knob clockwise or counterclockwise. IR-Receiver • Receiver for remote control unit.
Major button operations when external equipment is connected to this unit • When the Sirius Satellite Reveiver is connected * For details, see the section "Sirius Satellite Operations". [SAT] (Satellite) button • Use to switch to Satellite mode. • Switch the band. [VOLUME] knob • Select the category in category selection mode. [DISP] (Display) button • Press the button to switch the display indication. • Press and hold the button to scroll the display.
Optional Wired Remote Control Unit Operations • Following operations are enabled by remote control with the separately sold Wired Remote Control Unit CMRC1 (shown below) or CMRC2. Display Items Operation status indication* Titles, frequency, clock, etc. are displayed. * Status display may be different from the display of the control panel.
Optional Wired Remote Control Unit Operations Lower the volume level before powering the source unit off. The source unit stores the last volume setting. If the source unit is powered off with the volume up, when the source unit is powered back on, the sudden loud volume may harm your hearing and/or damage the sou rce unit. A WARNING When the front panel is open, no sound is produced, and source unit controls and remote control unit operations are disabled.
Wireless Remote Control Unit Operations • Following operations are enabled by remote control with the Wireless Remote Control Unit RCB-176-600. Wireless remote control unit Note: • Wireless Remote Control is not Waterproof. Please avoid Contact with Water. Signal transmitter ~, ~5RC-.BND.l [SRC] [!],[f] II ~.B . ~ II ~ ,,··.~-11 [11,_rcfj.rJ.n.r?J . • .i... \'~.'.·','.8.">.:.; ". II II' ./vmUM'\" [MUTE]---I:-:-I~~~) :~, [ISR]J ~8) '~'g; [SCN]~ II ~s7~ RPT ~~R II II ~:~~] [~~I] [I........
Wireless Remote Control Unit Operations Switches among radio, Sirius Satellite Receiver, CD/MP3, iPod, CD changer, TV and AUX. The power of this unit turns off by pressing and holding or 1 second or longer when the power is on. [BND] [i],[l] Switches reception band. When pressed and held for 1 second or longer: Seek tuning/manual tuning (radio mode only). up and down for seek/manual tuning (radio mode only). II] [MUTE] [ISR] Moves the next Switches disc in reception increasing order. band.
Basic Operations Note: • Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 6. Adjusting the volume Turning the [VOLUME] knob clockwise increases the volume; turning it counterclockwise decreases the volume. * Lower the volume level before powering the source unit off. The source unit stores the last volume setting.
Radio Operations Changing the reception area Mute This unit is initially set to USA frequency intervals of 10kHz for AM and 200 kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below. Use this function to turn off the sound immediately. 1. Press the [':~~IE] button. The sound turns off and "MUTE" appears on the display. 2. Press the [':~~IE ] button again to cancel the mute mode. u.s. ~ « ~ u..
Radio Operations Recalling a preset station A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exist to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [AM/FM] button and select the desired band (FM or AM). 2. Press the corresponding [DIRECT] button to recall the stored station. * Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
CDIMP3IWMA Operations MP3IWMA Precautions when creating MP31 WMA files What is MP3? • Usable sampling rates and bit rates MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality.
CDIMP3IWMA Operations Multi-session function When a disc contains both normal CD type tracks and MP3IWMA type tracks, you can select which type of the recorded tracks to play. Notes: ' • Never insert foreign objects into the CD SLOT. • If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. [Q]m~~ • Discs not bearing the ~~\¥,J or ~ mark and CDROMs cannot be played by this unit. • Some CDs recorded in CD-R/CD-RW mode may not be usable. ,,{lCOM.
CDIMP3IWMA Operations Displaying titles Fast-forwardlfast-rewind This unit can display title data for CD-text/MP3/ WMA disc with this unit. Each time you press the [DISP] button, the display changes in the following order: • Fast-forward • CD-text disc TRACK (Track name) and T01 00:00 (Track No.1 Play time) ... DISC (Disc title) and ARTIST (Artist title)'" Clock Display'" TRACK (Track title) and T01 00:00 (Track No.lPlay time) ... • MP3IWMA disc TRACK (File name) and T01 00:00 (Track No.1 Play time) ..
CDIMP3IWMA Operations Repeat play This function allows you to play the current track repeatedly. 1. Press the [REPEAT] button. 2. To cancel repeat play, press the [REPEAT] button again. Folder repeat play This function allows you to playa track in the folder currently being played back in the MP3/ WMA disc repeatedly. 1. Press and hold the [REPEAT] button for 1 second or longer. 2. To cancel folder repeat play, press the [REPEAT] button again.
Common Operations AUX function Dimmer Control .This system has rear RCA cables so you can listen to sounds and music from an external device connected to this unit. Cellular telephone mute This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings. * This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility. Changing the adjustment setting 1.
Common Operations Adjusting the non-fade volume * The factory default setting is "NFVOL +6". (Adjustment range: -6 to +6) 1. Press the [MENU] button to switch to the menu mode. 2. Press the [!] or [T] button to select "NF VOL". 3. Turn the [VOLUME] knob to adjust the nonfader volume. 4. Press the [MENU] button to return to the previous mode. Verifying your SIRIUS ID (Sirius mode only) 1. Press the [MENU] button to switch to the menu mode. 2. Press the [!] or [T] button to select "SID DISP". 3.
Common Operations Setting the method.for title scroll Set how to scroll in CD-text, MP3IWMA title. * The factory default setting is "ON". 1. Press the [MENU] button to switch to the menu mode. 2. Press the [!] or [,] button to select "SCROLL". 3. Turn the [VOLUME] knob to set the setting to "ON" or "OFF". eON: Scrolls automatically. eOFF: Scrolls just 1 time when the title was changed. 4. Press the [MENU] button to return to the previous mode. Amplifier cancel setting Set the internal amplifier on or off.
Common Operations Performing memory reset This function allows you to reset adjusted settings in the ROM. The stored settings like preset channels, adjusted areas, ISR memories, adjust mode settings and sound mode settings can be formatted by this function. Note: • The settings will remain in the ROM even if you turn the power off or press the reset button. 1. Press the [MENU] button to switch to the menu mode. 2. Press the [!] or [,] button to select "RESET". 3. Press and hold the [ENT] button.
Sirius Satellite Operations • Requires additional SIR-CL3M CeNET module. What is Sirius Satellite? SIRIUS'" REA D Y Selecting Satellite mode Sirius is radio the way it was meant to be: Up to 100 new channels of digital quality programming delivered to listeners coast to coast via satellite. That means 50 channels of completely commercial-free music.
Sirius Satellite Operations Switching the display Recalling a preset channel Each time you press the [DISP] button, the item changes as following order: A total of 18 SIRIUS channels can be stored (6SR1, 6-SR2 and 6-SR3). This allows you to select your favorite SIRIUS channels and store them in memory for later recall. 1. Press the [SAT] button and select the desired SIRIUS band (SR1, SR2 or SR3) . 2. To recall a stored SIRIUS qhannel, press the desired [DIRECT] button to select that channel.
Sirius Satellite Operations Notes: • Preset scan • When the category selection mode is entered, the category of the last received channel is displayed first. • The category selection mode is canceled when no channel with the selected category can be found. • Press the [!] or [T] button within 7 seconds after a channel has been set to continue seeking channels up or down. The category selection mode is canceled and normal reception is resumed if no operation is performed for 7 seconds.
iPod Operations Connecting the iPod CeNET Interface (additional EA12768 CeNET interface required) allows you to operate your iPod from the operation panel of this unit. This unit has the iPod MENU mode which allows you to operate by the same feeling as operating on the iPod. In the iPod mode, this system considers all the tracks stored in the iPod as one album when selecting tracks or playing them back.
iPod Operations Repeat play 1. Press the [CAT] button. This repeat playback of the track currently played back. It corresponds to the iPod operation of selecting "Settings" ... "Repeat (one)" from the menu of the iPod. 1. Press the [REPEAT] button. 2. To cancel repeat playback, press the [REPEAT] button again. All repeat play . This repeat playback of the all tracks. It corresponds to the iPod operation of selecting "Settings" ... "Repeat (ALL)" from the menu of the iPod. 1.
CD Changer Operations CD changer functions Selecting a CD When an optional CD changer (additional DCZ625 CeNET changer required) is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [DISC] button to select the CD changer mode to start play. If 2 CD changers are connected, press the [DISC] button to select the CD changer for play. 1. Press the [~DISC~] button to select the desired disc.
CD Changer Operations Random play Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is canceled. 1. Press the [RANDOM] button. 2. To cancel random play, press the [RANDOM] button again. Disc random play The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is canceled. 1. Press and hold the [RANDOM] button for 1 second or longer.
TV Operations TV tuner functions • Step tuning When an optional TV tuner (additional TTX7501 Z CeNET module required) is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor. Press the [!] or [l] button to manually tune in a station. Watching a TV 1. Press the [AM/FM] button and select the TV mode. 2. Press the [AM/FM] button to select the desired TV band (TV1 or TV2).
Power does not turn on. (No sound is produced.) Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Amplifier turn-on lead is No sound output when operating the shorted to ground or unit with amplifiers. excessive current is required. The settings in the ROM are not stored properly. Consult your store of purchase. Turn the unit off and check each wire for a possible short.
Sound is cutting out or skipping. Noise is generated or noise is mixed with sound. Water droplets may form on the internal lens in a humid place. Let dry for about 1 hour with the power on. File system is not correct. Use IS09660 level 1,2 or JOLIET or Romeo file system. Source selection The microprocessor has does not recognize not stored the proper GeNET source GeNET information. connection. The GeNET cable is not connected properly. 34 CMD5 Perform a system check.
If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. A DISC is caught inside the CD deck and is not ejected. This is a failure of CD deck's mechanism and consult your store of purchase. A DISC cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. A DISC is loaded upside- Eject the disc then reload it properly. down inside the CD deck and does not play.
Source unit harness wire connections Wire Color Function Yellow +12 V DC Constant Power Source/Memory Red +12 V DC Switch Lead/ Accessory Black Ground Blue/White Amplifier Remote Turn-on Grey Right Front Speaker (+) Grey/Black Right Front Speaker (-) White Left Front Speaker (+) White/Black Left Front Speaker (-) Purple Right Rear Speaker (+) Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz AM Tuner Frequency Range: U.S.
CE DECLARATION OF CONFORMITY under resJxmsibiJily OUI lJH.~~ Pfl)d~l~~! Al\'1tFtU BroadCtlst Receh1fr vritb CD Ph''''N-: :::::'~jDj}:~j:;:~2K(I);~::::':::::::::::::::~::::::::::::::::::::::::::::::::::~ . J?ntcJ.J!.~Lf&(.h~.: ~n __ , l?l'~;.2JO _ w§lic!J ~1Jmdafdis\ no nl'l,mVt!: i!lppl&~:<:lbl"'·.1 !~!!~~t\~~:t.J::.,.m!tt .n.fI.~h~.J;~~~!!,ilMl!t.l'.iiJ1~.l.~L.,:~.Mlr~l.5;;~1~~.B.!!!Ji:Q ...,ti.~JLf:tLt~!M~~~!:"' P.i1It';,~.~u:~.~.J:r.i.n!.Jm~.JJ$.~,.fl?r ... ...q.l.l.b:,•.~kc;:t~1~lj.
Printed in Philippines / Imprime aux Philippines / Impreso en Filipinas / Stampato ne!!e Filippine 284-0977-00 2006/12 InstallationlWire Connection Guide I Gufa de instalacion/conexion de cables I .. -1. n_<,,,,,;_jq"',;_-,,'Hn 11III BEFORE STARTING I P}Fl~=Ptt~~~=it\'='h«~'Mtf'~'>"'tr-'21 I ANTES DE COMENZAR I 1. Read the instructions carefully. 1. Lea cuidadosamente las instrucciones. '1 " LJ=3ggere 2.
... -3. INSTALLING THE SOURCE UNIT I INSTALACION DE LA UNlOAD FUENTE I • Marine stereo mounting dimensions Use the supplied template to cut and drill the holes. (Figure 4) • Dimensiones de montaje en una embarcacion Uti lice la plantilla suministrada para marcar las posiciones de los orificios y efectuarlos. (Figura 4) 182 179 ~ dryf""'71r.I~H--'; e praticare i fori. (Figura 4) .... • 60 _I_ Utilizzare la fllC1.
.. -4. CAUTIONS ON WIRING I ~'J::2}1FiE:({~;J\l~r~r~()i\lS~ tt\lwJ) ~E;i~,j,J PRECAUCIONES PARA LA CONEXION DE CABLES I 1. Be sure to turn the power off when wiring. 1. Antes de hacer las conexiones, asegurese de desconectar la alimentaci6n de la unidad. 2. Be particularly careful where you route the wires. Keep them well away from the engine, exhaust pipe, etc. Heat may damage the wires. 2. Sea especialmente cuidadoso al dirigir y fijar los cables. mantengalos alejados del motor, tubo de escape, etc.
-6. WIRE CONNECTIONS I @ To external amplifier @ CAUTION: • Disposici6n trasera *1 Leave the protective caps on wire terminals which are not connected. Please make sure when connecting external power amplifiers, that they are properly grounded. If this is not done, severe damage to the source unit may happen. ® ® Hacia el amplificador externo :;: 1 Deje el c,apuch6n protector en los cables que no esten conectados.
Drill appropriately prepared holes at the 6 places for fixing the screw depending on the materials and plate thickness of the panel.
.. II CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Dear Customer: Congratulations on your purchase -of a Clarion mobile electronic products. We are confident that you'll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website. The registration form is short and easy to complete.
281-0632-03 2007/1 Clarion~ CLARION 2007 LIMITED WARRANTY For USA and Canada only Except as noted, Clarion products purchased from an authorized Clarion dealer are warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase.
