Operation Manual

English

AV AV

❸

GENERAL

COLOR TONE

MARKER

NORMAL/MIRROR

▲

▼

Main

Common buttons when changing settings

① MENU/BACK button: Menu screen display/return to previous screen button

Genera: Volume/Language/To initial settings

Color tone: Brightness/Tone/Vividness/Dimmer setting

Normal/Mirror: Camera Normal / Mirror mode settings

② ▲／▼ buttons: Selection/adjustment of each item

③ ENT(VOL) button: Confirm button

※ If the buttons are not pressed for 5 seconds, the settings will be saved even if they have not been com-

pleted and the menu screen will disappear automatically.

❶

❷

SETTINGS

７.

① When a single signal (main, sub) is entered, the camera image corresponding to this is displayed. If the

signal is terminated, the display returns to the previous screen.

※ When the hazard off terminal is connected to the left winker (sub-trigger terminal is connected to the

right winker), even if a hazard signal is input, the system recognizes the hazard, and the display does

not switch to the sub-camera image.

※ If there is trigger signal input in power off (Stand-by) status, the screen switches on and displays chosen

trigger line (camera). And the screens turns off when the trigger signal switches off.

② When the main or sub signal image is displayed, pressing the ▲／▼ buttons will also switch

between the main camera and sub-camera image.

Former screen Main signal input Main signal off

Switch signal input screen (signal input priority order: main > sub signal)