Operating Instructions and Installation Instructions

[ ] button

3) When there is the TRG1(Reverse gear) input, CAM1 video will be shown on the screen. Using [ ] button,

the 2 split screen of CAM2/CAM1 or CAM1/CAM3 can be displayed.

In CAM2 full screen, press [MENU] button to see OSD. Select split screen with [ ] button and then press

[ ] button. If there is left signal input(TRG2), then CAM2(Left) in left side and CAM1(Rear) in right side will be

shown on the screen.

2) In case of TRG2 (Left turn signal) or TRG3 (Right turn signal), you can choose full screen or split screen by OSD

setting.

* This function is for showing not only Left(Right) but also rear view together at the same time, regardless of

former screen status. It displays CAM2(3) and CAM1 as split screen when TRG2(3) signal input is on.

CAM2

CAM2 TRIGGER SETUP

FULL SCREEN

SPLIT SCREEN

CAM2 CAM1

CAM1

CAM3 TRIGGER SETUP

FULL SCREEN

SPLIT SCREEN

CAM3 CAM3

In CAM3 full screen, press [MENU] button to see OSD. Select split screen with [ ] button and then press

[ ] button. If there is right signal input(TRG3), then CAM1(Rear) in left side and CAM3(Right) in right side will

be shown on the screen.

CAM1

CAM2 CAM1

CAM1 CAM3