Owner’s manual NX404 DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION & 6.
English E nglish CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Owner’s Manual Dear Customer: Congratulations on your purchase of a Clarion mobile electronic product. We are confident that you’ll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website.
Contents English Thank you for purchasing this Clarion product. •Please fully read this owner’s manual before operating this equipment. •Check the contents of the enclosed warranty card and store it in a safe place with this manual. Owner’s Manual 1. FEATURES............................................................................................................4 Expanding Systems...............................................................................................4 2. PRECAUTIONS............
E nglish Owner’s Manual NX404 English Selecting the Pandora mode...............................................................................34 Pandora Bluetooth mode.....................................................................................35 13. Bluetooth® AUDIO PLAYER OPERATIONS...................................................36 Selecting the Bluetooth Audio mode...................................................................36 Bluetooth audio player settings..........................
English 1.
E nglish English 2. PRECAUTIONS WARNING Owner’s Manual • For your safety, the driver should not watch any video sources and/or operate the controls while driving. Please note that watching and operating any video sources while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard. • Do not disassemble or modify this unit. It may cause an accident, fire, or electric shock.
English speed limits; road conditions including grade, percentage of incline and surface conditions; obstacles such as the height and width of bridges and tunnels; and other current driving or road conditions. Always rely on your own judgment when driving a car, taking into account current driving conditions. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
English E nglish Owner’s Manual 1.When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc (DVD/ CD) or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc (DVD/CD), wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.
English 3. CAUTIONS ON HANDLING Operation Panel Owner’s Manual For a longer service life, be sure to read the following cautions. • The operation panel will operate properly in a temperature range of 0˚ to 60˚ C. • Do not allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage. • Subjecting the operation panel to shocks may result in breakage, deformation or other damage.
Ball-point pen Roughness Never stick labels on the surface of the disc or mark the surface with a pencil or pen. • Never play a disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a disc, you may not be able to get it back out of the DVD player or it may damage the DVD player. • Do not use discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause missoperation or damage.
English About the registered marks, etc. Owner’s Manual • This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited. • Manufactured under license from Dolby Laboratories.
E nglish English 4.OPERATIONAL PANEL ] [Disc slot] [NAVI/AV] [POWER/VOL] [IR] [RESET] [microSD slot] [Cover] [AUX IN] Only navigation map card is available and don’t remove it when unit is power on Functions of Buttons [POWER/VOL] Knob • Press this knob to turn on the power. • When the power is already on, it moves to the Navigation mode. If Navigation mode is displayed, it moves to the Navigation menu. • Keep pressing this knob more than 2 second to turn off the power.
English 5. REMOTE CONTROL RCX005 Remote Control Included Signal transmitter Operating range : 30°in all directions Owner’s Manual [MUTE] [ / ] [ 0-9 ] [OPEN] [POWER / SRC] [VOLUME] [NAV/ AV] [SRCH] [BACK] [BAND] [SET] [MENU] [PIC] [ENT] [ , , , ] [TAG] [TITLE] [RPT] [ROOT] [ ], [ ] [SUB.T] [AUDIO] [ANGLE] 1.Press the retention tab and pull out the battery tray and remove the old battery. 2.
• Remove the battery if the remote control is not used for a month or longer. Important • Do not store the remote control in high temperatures or direct sunlight. • The remote control may not function properly in direct sunlight. • Do not handle the battery with metallic tools. • Do not let the remote control fail onto the floor, where it may become jammed under the brake or accelerator pedal. • Do not store the battery with metallic objects.
English • Press to perform chapter repeat / title repeat / repeat off while playing DVD mode. [AUDIO] Button • Press to perform Repeat Track/Repeat All while playing CD. • Press to switch the AUDIO channel of the disc while playing DVD. Owner’s Manual • Press to perform Repeat Track /Repeat Folder/ Repeat All while playing MP3/WMA, or video files on disc. • Press to perform Repeat Track /Repeat Folder/ Repeat All while playing MP3/WMA, or video files in USB memory.
3 4 5 6 7 8 9 10 11 12 13 14 15 1 - Tuner---Touch the button to display the Tuner mode. 2 - Pandora---Touch the button to display the Pandora mode. 3 - Bluetooth Audio--- Touch the button to display the Bluetooth Audio mode. 4 - Disc Audio---Touch the button to display the Disc Audio mode. 5 - iPod Audio---Touch the button to display the iPod Audio mode. 6 - Navigation---Touch the button to display the Navigation mode. 7 - HDMI---Touch the button to display the HDMI mode.
English 7. DVD VIDEO PLAYER OPERATIONS Discs Owner’s Manual Playable discs This DVD video player can play the following discs. Playable discs DVD video discs Audio CD CD TEXT Playable media files MP3/WMA/AAC DivX MP4 About CD Extra disc A CD Extra disc is a disc in which a total of two sessions have been recorded. The first session is Audio session and the second session is Data session.
1. Touch the [Settings] button on the Main Menu to access the Video setup menu. 2. Touch [Video] button. The video menu is displayed. Kid Safe G PG PG-13 PG-R R NC-17 Kid Safe General Audiences Parental Guidance Suggested Parents Strongly Cautioned Parental Guidance Restricted Restricted No One 17 And Under Admitted Adult Only Adult Owner’s Manual Selecting DVD Setup Menu 1.Select Others screen while in Setting mode. Touch [Parental Control] button. Touch the desired rating for level control.
Operate the DVD Player Menu Showing DVD Player mode screen English Owner’s Manual After disc is loaded, the play mode is automatically engaged. Touch any place of the screen to display DVD Video menu touch the screen again to return the playback screen. The display will return to the playback screen, if you do not touch the screen for 10 seconds. 12 11 10 You can select the button items displayed in the DVD menu by directly touching it. Play/Pause Playback 1. Touch [ 2.
This operation plays back chapters recorded on the DVD-Video repeatedly. 1. Showing the DVD Video menu, touch [ ] button. ] button once for Repeat Chapter, again 2. Touch [ for Repeat Title. 3. Touch [ ] button again to turn off the repeat playback. Using the Title Menu On DVD discs containing two or more titles, you can select from the title menu for playback.
Repeat Playback English This operation plays back video files recorded on the disc repeatedly. The repeat set as the factory default is Repeat all. ] 1. Showing the video files player menu, touch [ button. 2. Touch [ ] button once for Repeat Track, again for Repeat Folder. 3.Touch [ ] button again for Repeat All.
English Owner’s Manual 4. Touch [OK] to close the pop-up window. E nglish 3. Enter this code in DivX Player to create a “Registration video” disc on your PC. Once this “Registration video” disc has played on this device, registration is done, and you can enjoy some purchased DivX movies on your device. For detail please visit “http://www.divx.com/vod” *.mp4 files: • format: MPEG4 Visual Simple @L1 • Picture size: 720 x 480 • Audio format: AAC • Audio sampling frequency: 32/44.1/48 KHz *.
English 8. CD PLAYER OPERATIONS Listening to a Disc/Ejecting a Disc Owner’s Manual Please refer to Disc Video Player Operations -watching to a disc and Ejecting a disc. 16 - Song Title 17 - Artist/album Information 18 - Close option menu Button Showing CD Player Mode Screen Operate the CD Player Menu 1. After disc is loaded, the play mode is automatically engaged. 2. If disc have been loaded you can touch [Disc Audio] button on main menu to display CD player mode screen.
This operation allows searching using the track numbers recorded on the CDs. 1. Touch [ ] button to show [ ] button. ] button .The numerical keypad will 2. Touch [ appear on the screen and touch [ ] button. 3. Input the track number that you want to play back with [0] to [9] key and touch [OK] button. Playback starts from the track of the input track number. • If the input track number does not exist or searching with track number is not allowed, the screen image will not change.
English Owner’s Manual 2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC). • Some noise may occur depending on the type of encoder software used while recording. • In case of a track recorded at VBR (variable bit rate), the display for the play time of the track may be slightly different from the actual play time. Also, the recommended value of VBR ranges from 32 kbps to 320 kbps.
E nglish English 9. USB AUDIO OPERATIONS Notes on the Tag titles The limitations on the Tag titles are same as those in CD Player mode. Note: • This system will not operate or may operate improperly with some USB memory. Connect your USB memory with MP3 files, WMA AAC/ FLAC files to the USB connector. The system will automatically detect the connected device, and the [USB Audio] button on main menu will be enabled.
English Owner’s Manual 5. Repeat button 6. Shuffle button 7. MP3 files, WMA files in list 8. Folders in list 9. Page turning button 10. System time 11. Bluetooth status indicator 12. Mute status indicator 13. Playback status information 14. Album Art 15. Shortcut button 16. Current ID3 info area 17. Elapsed playing time indicator/Seek bar 18. Direct button 19. Scan button Playing Audio Files in USB Memory Play/Pause Playback 1. Touch [ 2. Touch [ ] button to pause during playback.
• Files protected with any DRM cannot be played. Notes on Using USB Memories General notes When no support files, the file list display nothing. Notes on the folder structure The limitations on the folder structure are same as those in USB Audio Player mode. Notes on the Tag titles The limitations on the Tag titles are same as those in CD Player mode. Select USB Video Mode Connect your USB memory with video files to the USB connector.
Switch to Previous/next file English Owner’s Manual Touch [ ] or [ ] button during playback to play previous /next file. • Touch [ ] button to starts playback from the beginning of the next track. • Touch [ ] button to starts playback from the beginning of the current track; when this button is touched again within about 5 seconds, playback starts from the beginning of previous track. Repeat Playback * The repeat set as the factory default is Repeat All.
4. During iOS device is connected by Bluetooth, and select the iPod mode, the volume level is controlled by only iOS device. 5. During iOS device is connected by Bluetooth, Album jacket image is not displayed. Note: • This system will not operate or may operate improperly with unsupported versions. • For detailed information on the playable iPod/iPhone models, see our home page: www.clarion.
English Owner’s Manual 8 - Next Page[ ] / Previous Page[ 9 - Category list 10 - System time 11 - Bluetooth status indicator 12 - Playback status indicator 13 - Art work 14 - Shortcut button 15 - Progress bar ] button iPod Audio Playlist Mode Screen 1 Play/Pause Playback 1. Touch [ 2. Touch [ ] button to pause during playback. ] button again to resume playback. Switch to Previous/next file • Touch [ ] or [ ] button during playback to play previous /next file.
Note: In Simple Control Mode, the best way is to control the iPod just on iPod. (3). Touch the desired track name on the list to play it. iPod Video Menu Operations Connect your iPod/iPhone to the USB connector. The system will automatically detect the connected device and the iPod Video button will be enabled for operation on the Main Menu screen. 2 1 - Simple Control button 2 - Video Mode button ] in option menu, • If the Simple Control is set to [ the screen will become Simple Control Mode.
English Owner’s Manual 1 - Option button 2 - Repeat button 3 - Previous Track button 4 - Play/Pause button 5 - Next Track button 6 - Playing File title 7 - Category list ] / Previous Page[ 8 - Next Page[ 9 - System time 10 - Bluetooth Status indicator 11 - Playback Status indicator 12 - Art work 13 - Shortcut button 14 - Progress bar ] button This operation is same as this in iPod Audio mode. iPod Video Simple Control Mode Screen Note: This icon shows only when 2-Zone on.
1. Touch [ 2. Touch [ ] button to pause during playback. ] button again to resume playback. Switch to Previous/Next Track English iPod Audio Bluetooth Mode When your iPod/iPhone have connected via bluetooth to this unit, you can also enter iPod Audio mode. The operation is same as the normal iPod Audio mode. • Touch [ ] or [ ] button during playback to play previous /next track. • Touch [ ] button to starts playback from the beginning of the next track.
English 12. Pandora OPERATIONS ® If you have any issues with the Pandora application on your mobile phone, please direct them to pandora-support@pandora.com. Owner’s Manual Selecting the Pandora Mode 1. Turn on Pandora function of your iPod. 2. Connect your iPod/iPhone/Android to the unit. 3. When iPod/iPhone/Android is already connected, touch the [Pandora] icon on the Main Menu screen.
E nglish English 1 - Add a new Station 2 - Select a device •This “Select Device” key is use when connect iPhone by the USB and connect the Android by Bluetooth. The default setting, the USB connection has priority 3 - Close the setting screen Owner’s Manual Pandora Bluetooth Mode When your mobile phone have connected to the unit via bluetooth.You can also enter the Pandora mode. The operation is same as the normal Pandora mode. 1 1 - BT mode When connected via bluetooth.
English 13. Bluetooth AUDIO PLAYER OPERATIONS ® Owner’s Manual Some Bluetooth cellular phones have audio features, and some portable audio players support the Bluetooth feature. These devices will be called as “Bluetooth audio players” in this manual. This system can play audio data stored in a Bluetooth audio player. Note: • This system will not operate or may operate improperly with some Bluetooth audio players. • For detailed information on the playable Bluetooth audio players, see our home page: www.
English Note: • Occasionally, depending on the environment, playback sounds may be fragmented, or switch noises may be generated. Playing Music After the connection with a Bluetooth audio player is established, the play mode is automatically engaged. • When playback is not started for some devices, touch the [ ] button manually. Pausing Playback 1.
English 14. Bluetooth TELEPHONE OPERATIONS ® Owner’s Manual When the connection with your Bluetooth cellular phone is established, the following functions are available on this unit: • Listening to your telephone calls on the car speakers. • Answering to an incoming call. • Making a call using the Ten-Key pad screen. • Making a call using the Phone Book data in the selected cellular phone. • Making a call using the History data of the dialed/ received calls. 1.
E nglish Owner’s Manual You can register up to 3 cellular phones. The registering method is as same as “Registering your Bluetooth audio player”. Your mobile phone Bluetooth version is under 2.0. Please input PIN code “0000”. 1. Turn on the power of the cellular phone you wish to register. ] to display the 2. Touch the Device button [ Device Select screen.
Making a Call Using the Phone Book English You can use the Phone Book data obtained from the cellular phone to make a call from this unit. Owner’s Manual • Only the Phone Book items with at least one telephone number registered in the captured Phone Book data are displayed on the Phone Book screen. Note: • Before using this function, the Phone Book data must be sent from the cellular phone. 3. Touch the [ ] (Send) button to call the entered number.
Manual memory 11 10 9 8 7 1. Touch the desired band button to select the band you wish to store. 2. Tune to a station you want to store using the seek tuning, step tuning, or preset tuning. 3. Touch and hold the desired Preset button you want to store for about 2 seconds. Auto Store 5 12 6 4 13 1 2 3 1. Preset Scan button 2. Seek down button 3. Seek up button 4. Step down button 5. Step up button 6. Frequencies display 7. System time 8. Bluetooth status indicator 9. Preset channel list 10.
English 16. HDMI MODE Wire Connection of HDMI Mode Owner’s Manual iPhone 4, iPhone 4S, iPhone 5, iPhone 5s and iPhone 5c can be connected by using the connector cable supplied with the iPhone 4, iPhone 4S, iPhone 5, iPhone 5s and iPhone 5c and HDMI cable (sold in the market) or CCA-770 and digital Av adapter. Note: The following is part of the wiring example. Depending on the device, there is a case to connect to the device directly with the CCA-771.
E nglish English Select HDMI source Owner’s Manual Touch the HDMI menu button, then appear the screen of the connected device. This HDMI mode is only indicate the screen of the iPhone, Android. Can‘t operate by the touch screen of NX404 Note: Depending on the application and model of the mobile phone, there is the case that black frame appears around the screen.
English 17. AUX External peripheral devices, including a game console, camcorder, navigation unit, iPod/iPhone, etc. can be connected to the AUX connector on the front or back of this unit using the A/V media cables. Owner’s Manual Switching to AUX IN Touch [AUX1] /[AUX2] button on Main Menu to select desired mode (when unit is reading). If the external device connected to AUX input have audio signal, the unit will broadcast audio of external device.
2 1 1. Touch the button to access the front source. 2. Touch the button to close the rear source. Multi-Zone Operation Independent sources can be played simultaneously on the unit. For example, a FM/AM console can be playback on the front screen while DVD video is available to rear passengers. But now can’t select DVD video in front. Access Rear-Zone DVD Video Rear Source Control Info Mode. 1. Touch the Rear button on Main Menu to access the Rear Source. 2. Select a source to play.
iPod Video Rear Source ID3 Mode AUX1 English Owner’s Manual AUX2 iPod Video in Rear iPod Video Rear Source Control Play Mode 7 1 2 3 4 5 6 1 - Previous Track /Fast Backward button 2 - Play/Pause button 3 - Next Track/Fast Forward button 4 - Progress bar 5 - Menu List button: Press the Menu button to display the iPod Video Rear Source mode screen. 6 - Repeat button: Same as iPod function of front source 7 - Front/Rear button If the screen displays Rear Source, touch to switch to Front Source.
E nglish English 20. SETTING OPERATIONS Touch [ ] button on the Main menu screen. The Setting menu screen will be displayed. Owner’s Manual General Setup Menu Time: Set system clock. 24-Hour Format: Set the time display mode. Beep: Turn on or turn off the beep confirmation sound. Bluetooth: Set the Bluetooth On or Off. Wallpaper: Choose the desired wallpaper. Input Aux Sense: AUX input switch, including Low, Middle, High. System Language: Set the Language for system screen.
English Owner’s Manual This menu includes: DVD Wide Screen Mode; Dimmer. Dimmer Mode DVD Wide Screen Mode: Set the DVD wide screen mode On or Off. Dimmer: Set Dimmer value from 0 to 20. Dimmer Mode: There are three options, Day, Night and Auto. Navigation Setup Menu Audio Setup Menu This menu includes: GPS Time, Navi Interrupt, Voice Guidance. GPS Time: Set the system time to be synchronized with GPS local time or not. Navi Interrupt: There are three choices: On/Popup/ Off.
E nglish English Audio Language: Set the Language for DVD Audio. Subtitle Language: Set the Language for DVD subtitle. Blinking LED: Set blinking LED On or Off. Screen Calibrate: The function of it is to select the TS Calibrate YES or NO. Factory Default: The function is to select to load factory default or not. Owner’s Manual Set the Anti-Theft code 1. If your unit is unlocked, hold the [ ] button more than 2 seconds, then the Anti-Theft setting mode will display. Users can change anti-theft code.
English 21. TROUBLESHOOTING GENERAL Owner’s Manual Problem Power does not turn on. (No sound is produced.) Nothing happens when buttons are pressed. Display is not accurate. The remote control unit does not work. Cause Measure Incorrect wiring. Consult your installation center. Fuse is blown. The microprocessor has malfunctioned due to noise, etc. Direct rays of the sun fall on the light-receptive part of the remote control unit.
Measure The USB connector is broken. Replace with a new USB device. USB device cannot be inserted. The USB device has been inserted with wrong direction. USB device is not recognized. The USB device is damaged. No sound heard with the display “NO FILE” shown. No MP3/WMA file is stored in the USB device. The video image of iPod/ iPhone is disturbed. The TV Signal setting of the iPod/iPhone is not set correctly. Sound skips or is noisy. Connectors are loose. MP3/WMA files are not encoded properly.
TFT screen English Owner’s Manual Problem Cause Measure The image is not displayed. The parking brake is not engaged. Check that the parking brake is engaged. The operating condition is not good. The temperature inside the vehicle may be 0°C or lower. Set to an appropriate temperature (25°C or so) and check it again. The display is dark. The Dimmer control is too low. The headlight of the vehicle is lit There are red, green, and blue points in display.
E nglish English 22. ERROR DISPLAY If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem. Display Cause Measure BAD DISC A disc cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc. BAD DISC BAD DISC PARENTAL VIOLATION Disc Region incorrect A disc is caught inside the DVD deck and is not ejected. A disc is loaded upside- down inside the DVD deck and does not play.
English 23. SPECIFICATIONS Owner’s Manual FM Tuner A2DP (Advanced Audio Distribution Profile) Frequency Range: 87.9 MHz to 107.9 MHz AVRCP1.2,1.3,1.4 (AV Remote Control Profile) Usable Sensitivity: 8 dBµV PBAP (Phone Book Access Profile) Stereo Separation: 25 dB (1 kHz) SPP (Serial Port Profile) Frequency Response: 30 Hz to 14 kHz Power Class: 2 AM Tuner USB Frequency Range: 530 kHz to 1,710 kHz Specification: USB 1.1/2.
English E nglish 4’’ 1 0 0 m m 6.8’’ 172mm Owner’s Manual 6.4’’ 165mm 7’’ 1 7 8 m m NX404 dimensions: NX404 weight: 2.
English 24. WIRE CONNECTION GUIDE Owner’s Manual Note: • Before installing, be sure to disconnect the negative cable of the car battery. • In the optional devices, the RCA cables and the Connector cables are separately-sold items. • When connect the HDMI cable, be sure to fix with the HDMI cable holder and Machine screw(M2 x 4).
English E nglish Black Purple Purple/Black Red Gray Gray/Black White White/Black Green Green/Black Blue/White Orange/White Blue Brown Grass-green Purple/White Owner’s Manual Yellow Connect directly +12V to battery Ground Rear right + Rear right - +12V accessory Front right + Front right Front left+ Front leftRear left+ Rear leftAmplifier turn-on cord Illumination Auto antenna Phone interrupt Parking brake cord Reverse gear cord Note: *1: Connecting the PHONE INTERRUPT terminal The phone interrupt wi
Clarion Co., Ltd. All Rights Reserved. Copyright © 2014: Clarion Co., Ltd.
Owner’s manual NX404 US English
Thank you for choosing the Clarion NX404 as your navigator. Start using Clarion NX404 right away. This document is the detailed description of the navigation software. You can easily discover Clarion Mobile Map while you are using it; however, we still recommend that you read this manual to fully understand the features and functions. Easy navigation map updates It is easy to keep the navigation system up to date.
Table of contents 1 Warnings and Safety information ........................................................................................... 6 2 Getting started ........................................................................................................................... 7 2.1 Navigation menu ................................................................................................................................. 8 2.2 Buttons and other controls on the screen .........................
3.1.2.7 Selecting a city/town center as the destination ................................................................................................... 45 3.1.2.8 Entering an address with a ZIP code .................................................................................................................. 46 3.1.2.9 Tips on entering addresses quickly ..................................................................................................................... 48 3.1.
5.1.2 Daytime and night color themes ............................................................................................................... 83 5.1.3 Tunnel view .............................................................................................................................................. 84 5.1.4 Route calculation and recalculation .......................................................................................................... 84 5.1.5 Green routing ........................
1 Warnings and Safety information The navigation system helps you find your way to your destination with the built-in GPS receiver. Clarion Mobile Map does not transmit your GPS position; others cannot track you. If you accept it when first using the application, Clarion Mobile Map collects usage information and GPS logs that may be used for improving the application and the quality and coverage of maps. The data is processed anonymously; no one will be able to track any personal information.
2 Getting started Clarion Mobile Map is optimized for in-car use. You can use it easily by tapping the screen buttons and the map with your fingertips. When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings (page 100). 2. Read the End User License Agreement. Tap 3.
6. If needed, modify the time format and unit settings. Later you can change them in Regional settings (page 100). 7. If needed, modify the default route planning options. Later you can change them in Route settings (page 93). 8. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 89). After the initial setup, the Navigation menu appears and you can start using Clarion Mobile Map. 2.
• Tap • to start navigating on the map. The button itself is a miniature live map Tap that shows your current position, the recommended route and the surrounding map area. Tap the button to enlarge the map to the full screen. to simulate demo routes or to run some additional applications. 2.2 Buttons and other controls on the screen When you are using Clarion Mobile Map, you usually tap buttons on the touch screen.
Switch When there are only two Tap it to turn the switch on or off. choices, a checkmark shows whether the feature is enabled. Slider When a feature can be set to different values in a range, Clarion Mobile Map shows an indicator on a gauge that displays and sets the value. Virtual keyboard Alphabetic and alphanumeric keyboards to enter text and numbers. • Drag the handle to move the slider to its new position. • Tap the slider where you want the handle to appear; the thumb jumps there.
Entering numbers and symbols Tap to switch to a keyboard offering numeric and symbol characters. Finalizing the keyboard entry (accepting the suggested search Tap result) Finalizing the keyboard entry (opening the list of search results) . Tap . Tap . Tap . Finalizing the keyboard entry (saving your input) Canceling the keyboard entry (returning to the previous screen) 2.2.2 Beyond single screen tap You usually need to tap the screen only once.
Gestures (drag&drop) You need to drag and drop the screen only in cases like: • Moving the handle on a slider. • Scrolling the list: grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. • Moving the map in map browsing mode: grab the map, and move it in the desired direction. 2.3 Map screen 2.3.1 Navigating on the map The Map screen is the most frequently used screen of Clarion Mobile Map.
When GPS position is available, the Vehimarker is displayed in full color, now showing your current position. There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information. button gives quick access to frequently used functions. You can change the available The functions in Settings. By default, only one data field is displayed in the bottom right corner. Tap this field to see all route data fields.
Default data fields when navigating a route (tap and hold any of the fields to change its value): Field Description Shows the distance you need to travel on the route before reaching your final destination. Shows the time needed to reach the final destination of the route based on information available for the remaining segments of the route. The calculation cannot take into account traffic jams and other possible delays.
2.3.3 Objects on the map 2.3.3.1 Streets and roads Clarion Mobile Map shows the streets in a way that is similar to how the paper road maps show them. Their width and colors correspond to their importance: you can easily tell a freeway from a small street. 2.3.3.2 Turn preview and Next street When navigating a route, the top section of the Map screen shows information about the next route event (maneuver) and the next street or the next city/town.
Keep left. Continue straight in the intersection. Go left on the traffic circle, 3rd exit (next maneuver). Enter traffic circle (second next maneuver). Enter freeway. Exit freeway. Board ferry. Leave ferry. Approaching a waypoint. Approaching the destination. 2.3.3.3 Lane information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route.
2.3.3.4 Junction view If you are approaching a freeway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows. At the top of the screen road signs show you additional information. If you want to hide the currently displayed junction, tap the picture and the Map screen returns. 2.3.3.5 Freeway exit services You may need a gas station or a restaurant during your journey.
2.3.3.6 3D object types Clarion Mobile Map supports the following 3D object types: Type 3D terrain Description 3D terrain map data shows changes in terrain, elevations or depressions in the land when you view the map in 2D, and use it to plot the route map in 3D when you navigate. Hills and mountains are shown in the background of the 3D map, and illustrated by color and shading on the 2D map.
2.3.4 Manipulating the map Tap the map anywhere to browse it during navigation. The map stops following the current position (the Vehimarker, a blue arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help you modify the map view. Action Moving the map with drag&drop Button(s) No buttons Zooming in and out Description You can move the map in any direction: tap and hold the map, and move your finger towards the direction you want to move the map.
Location information Return to normal navigation Tap this button to open a new screen with information about the selected map point, the Cursor. Tap this button to move the map back to follow the current GPS position. Automatic map rotation is also re-enabled. The map manipulation buttons disappear and navigation continues.
This button opens the list of your Favorite destinations. This button opens the History list. You can select one of your previous destinations. This button opens the route editing function. Find / Favorite (page 62) Find / History (page 65) My Route / Edit Route This button opens the route related settings. More / Settings / Route Settings (page 93) This button opens the map related settings.
This button opens the list of maneuvers (the itinerary). Tap the top of the Map screen during navigation. With this function you can save the active route for later use. My Route / More / Save Route My Route / More / Load With this function you can replace the active route with a Route previously saved route. Find / Find Places (page With this function you can search for Places of Interest in various 49) different ways.
2.3.6 Checking the details of the current position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. You can access this screen from the map in one of the following ways: • If the current street is displayed below the Vehimarker (the current position on the map), tap it to open the Where Am I? screen. • Open the Quick menu and tap the button.
You can also search for assistance near your current position. Tap screen for the Quick search: to open a new The following services can be searched around the current position or the last known position: • : Car repair and roadside assistance services • : Police stations • : Medical and emergency services • : Gas stations Tap any of the buttons, select a Place from the list, and navigate to it.
3 On-road navigation When first started, Clarion Mobile Map calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation). • You can also plan a route independently of your current GPS position or even without GPS reception.
3. First you see hints on the screen showing how you can use the function. These hints are only displayed the first time you use this screen. 4. Tap anywhere and the hints disappear. Once you get through this screen to the search results, the hint will not appear again when you open this window later but you can see them again if you tap the information button on the right side of the input field. 5. You can see the input field at the top of the screen.
7. With the proper search area displayed, you can start entering the name, address or category of the button shows how destination you are looking for. The number shown in the many results match the entered text. The background search is carried out while you enter letters so this number may keep on increasing if you wait a few seconds. Keep on entering new letters while this number is high. 8.
13. After a short summary of the route parameters, the map appears showing the entire route. The to modify route parameters, or tap route is automatically calculated. Tap and start your journey. If you know that you will use this destination frequently, before tapping Tip! confirm the destination, put it on the list of your Favorites first: tap to then , give a name for the new Favorite, and tap to save the location. The map with the destination returns automatically. Now you can start your journey.
5. After a short summary of the route parameters, the map appears showing the entire route. The to modify route parameters, or tap route is automatically calculated. Tap and start your journey. Note! The alternative way to search for a recent destination is to tap the button in the Quick menu or in the Destination menu. The rest of the procedure is similar to the above. 3.1.1.
5. After a short summary of the route parameters, the map appears showing the entire route. The to modify route parameters, or tap route is automatically calculated. Tap and start your journey. Note! The alternative way to search for a Favorite destination is to tap the button in the Quick menu or in the Destination menu. The rest of the procedure is similar to the above. 3.1.1.3 Combined Search - Navigating to an address To find an address in Combined Search, carry out the search as described earlier.
5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. button in the Destination menu. Note! The alternative way to search for an address is to tap the Unlike the Combined Search, this alternative search method is a structured one where you can define the parts of the address separately. 3.1.1.
the new location. Tap select a different destination. 5. to confirm the destination, or tap to After a short summary of the route parameters, the map appears showing the entire route. The to modify route parameters, or tap route is automatically calculated. Tap and start your journey. Note! The alternative way to search for an address is to tap the button in the Destination menu.
5. After a short summary of the route parameters, the map appears showing the entire route. The to modify route parameters, or tap route is automatically calculated. Tap and start your journey. The alternative way to search for a Place is to tap the Note! button in the Quick menu or the button in the Destination menu. These alternatives are different from the Combined Search.
5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. The alternative way to search for a Place category is to tap the button in the Destination Note! menu and then tap . This alternative is different from the Combined Search. When you search for a Place category here, you will go through the whole Place category tree.
3.1.2.1 Entering an address (United States) To enter an address as the destination, do as follows: 1. If you are on the Map screen, tap 2. In the Navigation menu, tap the following buttons: 3. By default, Clarion Mobile Map proposes the country and state where you are. If needed, tap to return to the Navigation menu. , . , enter the first few letters of the destination country or state on the keyboard, and select one from the list.
5. Enter the street name: . a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap . • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears ). Select the street from the list. automatically, tap 6. 7. Enter the house number: a. Tap b.
8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.2.2 Entering an address (Canada) To enter an address as the destination, do as follows: 1. If you are on the Map screen, tap 2. In the Navigation menu, tap the following buttons: 3. By default, Clarion Mobile Map proposes the country, state and city/town where you are.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears ). Select the city/town from the list. automatically, tap 5. Enter the street name: a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: . • The most likely street name is always shown in the input field. To accept it, tap .
c. 7. to finish entering the address. (If the entered house number Tap cannot be found, the midpoint of the street is selected as the destination.) A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire route.
3. By default, Clarion Mobile Map proposes the country and state where you are. If needed, tap the button with the name of the country, enter the first few letters of the destination country or state on the keyboard, and select a country and state from the list. If you select the country without a state, this function cannot work. 4. Enter the street name: a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: .
5. 6. Enter the house number: a. Tap b. Enter the house number on the keyboard. (To enter letters, tap c. to finish entering the address. (If the entered house number Tap cannot be found, the midpoint of the street is selected as the destination.) . ). A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( to confirm the destination, or tap ) appears at the new location.
3.1.2.5 Entering the midpoint of a street as the destination You can navigate to the midpoint of a street if the house number is not available: 1. If you are on the Map screen, tap 2. In the Navigation menu, tap the following buttons: 3. Select the country, state and city/town as described earlier (page 35). 4. Enter the street name: , . . a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field.
6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.2.
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears ). Select the street from the list. automatically, tap 5. Enter the intersecting street name: 1. 6. Tap . • If only a few intersecting streets exist, their list appears immediately. • In case of a longer street, the keyboard screen appears. Start entering the name of the intersecting street on the keyboard.
3.1.2.7 Selecting a city/town center as the destination The city/town center is not the geometric center of the city/town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. to return to the Navigation menu. 1. If you are on the Map screen, tap 2. In the Navigation menu, tap the following buttons: 3. Select the country and state as described earlier (page 35). 4.
6. A full screen map appears with the selected point in the middle. If necessary, tap the map ) appears at the new location. Tap somewhere else to modify the destination. The Cursor ( to confirm the destination, or tap to select a different destination. 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.2.
• If the desired number does not show up, open the list of results by tapping . Select the ZIP code from the list. 5. Enter the street name: a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: . • The most likely street name is always shown in the input field. To accept it, tap . • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears ).
c. 7. to finish entering the address. (If the entered house number Tap cannot be found, the midpoint of the street is selected as the destination.) A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( to confirm the destination, or tap ) appears at the new location. Tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire route.
• You can speed up finding an intersection: • Search first for the street with a less common or less usual name; fewer letters are enough to find it. • If one of the streets is shorter, search for that one first. You can then find the second one faster. • You can search for both the type and the name of a road.
2. Using the keyboard, start entering the name of the Place. 3. After entering a few letters, tap containing the entered character sequence. 4. (optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). If you need to to open the list of Places with names . reorder the list, tap 5. Browse the list if necessary and tap one of the list items.
8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.3.2 Searching for a Place of Interest using preset categories The Preset search feature lets you quickly find the most frequently selected types of Places. 1. If you are on the Map screen, tap 2. In the Navigation menu, tap the following buttons: 3.
• If there is no active route (destination is not selected), they are searched around the current position. • If the current position is not available either (no GPS signal), they are searched around the last known position. • : • If an active route exists, restaurants are searched along the route. • If there is no active route (destination is not selected), they are searched around the current position.
9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.3.3 Searching for a Place of Interest by category You can search for Places of Interest by their categories and subcategories. 1. If you are on the Map screen, tap 2. In the Navigation menu, tap the following buttons: 3. Tap 4.
• to search along the active route, and not around a given point. Tap This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming gas stations or restaurants. (The result list will be ordered by the length of the necessary detour.) 5. (optional) If you have selected 6. Select one of the main Place categories (e.g. Accommodation) or tap Places around the selected location or along the route. 7.
8. Sometimes the list of brands in the selected Place subcategory appears. Select one brand or tap to list all Places in the selected subcategory around the selected location or along the route. 9. 10. Finally, the results appear in a list. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 11.
14. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.3.4 Searching for a Place of Interest by name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. to return to the Navigation menu. 1.
• to search along the active route, and not around a given point. Tap This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming gas stations or restaurants. (The result list will be ordered by the length of the necessary detour.) 5. (optional) If you have selected 6. Select one of the main Place categories (e.g. Accommodation) to search in or tap , select the city/town to search in. to search among all Places. 7.
if you have not done it before. 8. Tap 9. Using the keyboard, start entering the name of the Place. to open the list of Places with names 10. After entering a few letters, tap containing the entered character sequence. 11. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 12.
15. After a short summary of the route parameters, the map appears showing the entire route. The to modify route parameters, or tap route is automatically calculated. Tap and start your journey. 3.1.3.5 Searching for a Place of Interest by its phone number You can search for Places of Interest by their phone number: 1. If you are on the Map screen, tap 2. In the Navigation menu, tap the following buttons: 3. The numeric keyboard appears. Enter the phone number you are looking for or a part of it.
9. If necessary, tap the map somewhere else to modify the destination. The Cursor ( to confirm the destination, or tap at the new location. Tap to select a different destination. 10. ) appears After a short summary of the route parameters, the map appears showing the entire route. The to modify route parameters, or tap route is automatically calculated. Tap and start your journey. 3.1.3.
• : Medical and emergency services • : Police stations • : Gas stations 4. Tap any of the quick search buttons to get an instant list of that type of Places. 5. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 6. Browse the list if necessary and tap one of the list items.
3.1.4 Selecting a map location as the destination 1. If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap the following buttons: 3. Locate your destination on the map: move and scale the map as needed. 4. Tap the location that you want to select as your destination. The Cursor ( 5. Tap 6. After a short summary of the route parameters, the map appears showing the entire route. The , . ) appears there. to select the Cursor as the destination.
2. Tap . The list of Favorite destinations is displayed. 3. Tap the Favorite that you want to set as your destination. If necessary, browse down to see more of the list or tap destination. 4. and enter a few letters from the name of the Favorite A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( to confirm the destination, or tap ) appears at the new location. Tap to select a different destination. 5.
3.1.6 Selecting your Home location To navigate to your Home location, first you need to save it. Seach for your address or browse the map and select and when the Cursor is at the desired location, tap . Now that the Home location is set, you can quickly navigate to it: 1. 2. To select the Home location, do one of the following: • If you are on the Map screen, tap and then tap the Quick menu in Settings - page 93).
3.1.7 Selecting a recent destination from the History The destinations that you have set earlier appear in the History. 1. Access the History: • If you are on the Map screen, tap • If you are in the Navigation menu, tap and then tap . and then tap . 2. The list of recent destinations appears. Smart History promotes three destinations to the first page based on your previous routes (most likely destinations). The rest of the destinations are ordered by time they were last selected.
3.1.8 Entering the coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: 1. If you are on the Map screen, tap 2. In the Navigation menu, tap 3. Open the 4. You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds. 5. (optional) If necessary, tap in UTM format. 6. When finished, tap 7.
8. After a short summary of the route parameters, the map appears showing the entire route. The to modify route parameters, or tap route is automatically calculated. Tap and start your journey. 3.1.9 Building a route from the list of destinations (Create Route) You can also build your route destination by destination from the My Route menu. 1. If you are on the Map screen, tap 2. In the Navigation menu, tap 3. Tap 4.
6. The Destination menu appears and you can select the destination of the route the same way as described in the previous sections. 7. When the new destination is selected, the list returns. 8. To add more destinations, tap repeat the above procedure. where you want to insert the new route point in the list, and 3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: 1. If you are on the Map screen, tap 2. In the Navigation menu, tap 3. .
3.3 Checking route parameters and accessing route related functions You can check different parameters of the route recommended by Clarion Mobile Map. 1. If you are on the Map screen, tap 2. In the Navigation menu, tap 3. The following pieces of information are displayed: 4. to return to the Navigation menu. . • The name and/or address of the destination. • Warning icons (if any). They provide extra information about your route (e.g. unpaved roads or toll roads to be taken).
3.4 Modifying the route When navigation is already started, there are several ways to modify the active route. The following sections show some of those options. 3.4.
3. If you already have a route, tap . If you are starting a new route, tap . 4. The first line is the start of the route, normally the current GPS position. Tap your action at the warning message. 5. The Destination menu appears and you can select the start point of the route the same way you select a destination. 6. When the new start point is set, tap and confirm .
7. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 8. To return to normal navigation, tap . 3.4.3 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations. You can add or remove destinations, modify the start position or reorder the list. 1. If you are on the Map screen, tap 2. In the Navigation menu, tap 3.
3.4.4 Pausing the active route You do not need to pause the active route: when you start driving again, Clarion Mobile Map restarts the voice instructions from your position. 3.4.5 Canceling the active route To cancel the navigated route, do one of the following: • If you are on the Map screen, tap you need to tap • and then tap . (If you have a route with waypoints, until all waypoints are deleted.) In the Navigation menu, tap route is deleted with all its waypoints. and then tap .
4. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 5. Or if you cannot find a good alternative, tap different routing methods. 6. Select one of the route alternatives and tap to return to the previous screen. Clarion Mobile Map recalculates the route. The orange line now shows the new recommended route. and scroll down for routes with 3.4.
3. Tap . 4. Tap . 5. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 6. Or if you cannot find a good alternative, tap different routing methods. 7. Select one of the route alternatives then tap and hold for a few seconds to return to the Map screen. Clarion Mobile Map recalculates the route. The orange line now shows the new recommended route.
3.4.8 Changing the road types used in route planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings (page 93). 1. On the Map screen, tap 2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road types. You have the following options (their order depends on the selected vehicle type): 3. and then tap .
3.5 Saving a location as a Favorite destination You can add any location to Favorites, the list of frequently used destinations. Planning a route to one of the Favorite destinations is described on page 62. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, etc. 2. When the full screen map appears with the selected location in the middle, tap . 3. Tap 4.
2. The list of Favorite destinations is displayed. 3. Tap the Favorite that you want to edit. If necessary, browse down to see more of the list or tap and enter a few letters from the name of the Favorite destination. 4. A full screen map appears with the selected point in the middle. 5. Tap 6. Tap any of the data fields and modify its content. 7. Tap and hold to see the details of the selected Place. to return to the map. 3.
4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap to save the location as a new alert point. 3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railroad crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap 3. Scroll down the list and tap 4.
3.8 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: to return to the Navigation menu. 1. If you are on the Map screen, tap 2. In the Navigation menu, tap 3. Tap 4. Scroll down the list and tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route. 1. . .
• 2. : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal speed. Tap to stop the simulation.
4 Off-road navigation When first started, Clarion Mobile Map calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Route settings in one of the following ways: • , From the Main menu, tap , and then . • From the Map screen, tap , and then . Most of the procedures described for on-road navigation also apply to off-road navigation.
5 Reference Guide On the following pages you will find the description of the different concepts and menu screens of Clarion Mobile Map. 5.1 Concepts 5.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognize your maneuver at the next junction.
5.1.3 Tunnel view When entering a tunnel, the map is replaced with a generic tunnel image so that surface roads and buildings cannot distract you. The top-down overview of the tunnel helps you orient yourself. The remaining distance in the tunnel is also displayed. After leaving the tunnel, the original map view returns. This feature can be turned off in Settings (page 98). 5.1.
• Vehicle types: When creating a new vehicle profile, select one of the below vehicle types. Besides the below mentioned conditions, dimension, weight and freight hazard restrictions can also be taken into account when planning a route. • Road types used or avoided in route calculation: • • • • • • Clarion Mobile Map automatically recalculates the route if you deviate from the proposed itinerary. For further information about Route settings, see page 93. 5.1.
With a vehicle type where green routing is selectable, whichever route planning method is selected, the Green details are also shown when you confirm the route: If the selected route planning method is not Green, and you have allowed the application to show the green alternative, the price, fuel consumption and CO2 emission differences between your selected route and the Green route are also shown on this screen: Tap the field with these details to switch the route to Green immediately. 5.1.
The warning for road safety cameras is disabled when you are in a country where road safety Note! camera warning is prohibited. However, you must ensure on your own liability that using this feature is legal in the country where you intend to use it. 5.1.7 Speed limit warning Maps may contain information about the speed limits of the road segments. Clarion Mobile Map is able to warn you if you exceed the current limit.
5.2 'More' menu The 'More' menu provides you with various options and additional applications. On the map screen, tap the following buttons: Button , . Description You can configure the program settings, and modify the behavior of Clarion Mobile Map. Finetune route planning options, change the look of the Map screen, turn on or off warnings, or restart the Configuration wizard, and so on. See the next chapter for details.
Run the Demo and watch sample route simulations to see how navigation works. The About section provides you with product information. Read the Software and Database End User License Agreement, or check the map and other contents of the application. You can also access program usage statistics. 5.3 Settings menu You can configure the program settings, and modify the behavior of Clarion Mobile Map. On the map screen, tap the following buttons: The Settings menu has several options. Tap Button , , .
These settings allow you to customize the application for your local language, measurement units, time and date settings and formats, as well as to choose the time zone. Trip logs and track logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. The application collects usage information and GPS logs that may be used for improving the application and the quality and coverage of maps.
5.3.1 Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application. A new screen shows the different sound types and their controls. See below for details. This button shows the current voice guidance profile.
Maps may contain information about the speed limits of the road segments. Clarion Mobile Map is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. The maximum speed set in the vehicle profile is also used for this warning. Clarion Mobile Map alerts you if you exceed the preset value even if the legal speed limit is higher.
You can control the volume of the following sound types: Button Description This is the main volume control. Use the hardware knob to adjust the main volume. These controls affect the volume of the guidance sounds (verbal instructions). Turn off the attention tone preceding verbal instructions or adjust its volume. These controls affect the volume of the non verbal alert sounds (beeps). Controls for each sound type: Button Volume slider Description Adjusts the volume of the related sound.
To let the route fit your needs, you can also set which road types are to be considered for or to be excluded from the route if possible. Excluding a road type is a preference. It does not necessarily mean total prohibition. If your destination can only be accessed using some of the excluded road types, they will be used but only as much as necessary.
Vehicle profiles: When you tap , you can set the following parameters: Button Description Tap this button to rename the profile for something meaningful. Enter the average consumption of your vehicle when used in built-up areas. The unit for consumption can be set in Regional Settings. Enter the average consumption of your vehicle when used on highways. The unit for consumption can be set in Regional Settings. Select the engine and fuel type of your vehicle. This helps in estimating the CO2 emission.
Route Planning Method types: Button Description Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. Gives a short route to minimize the distance to travel. It can be practical for slow vehicles. Searching for a short route regardless of the speed, this route type is rarely practical for normal vehicles. Gives a quick but fuel efficient route based on the fuel consumption data given in Route settings (page 93).
5.3.5 Map settings You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable color themes from the list for both daytime and night use, change the blue arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to show on the map). The map is always shown on the screen so that you can see the effect when you change a setting.
Show or suppress the 3D elevation of the surrounding terrain. Turn on or off track log saving, that is, saving the sequence of the locations your journeys go through. Select which Places to show on the map while navigating. Too many Places make the map crowded so it is a good idea too keep as few of them on the map as possible. For this, you have the possibility to save different Place visibility sets. You have the following possibilities: • Tap the checkbox to show or hide the Place category.
When entering tunnels, the surface roads and buildings can be disturbing. This feature shows a generic picture of a tunnel instead of the map. A top-down overview of the tunnel and remaining distance are also displayed. Turn on the route progress bar to see your route as a straight line on the left side of the map. The blue arrow represents your current position and moves up as you travel. Waypoints and Traffic events are also displayed on the line.
5.3.7 Display settings Display related settings include menu animations, separate skins for daytime and night use and the brightness of the display. When animation is turned on, buttons on menus and keyboard screens appear in an animated way. Screen transitions are also animated. 5.3.8 Regional settings These settings allow you to customize the application for your local language, measurement units, time and date settings and formats, as well as to choose the time zone.
Track logs, the sequence of the positions given by the GPS receiver, can be saved together with trip logs. They can later be displayed on the map. You can let the application save the track log whenever it saves a trip. 5.3.10 Log collection settings If you accept this when first using the application, it collects usage information and GPS logs that may be used for improving the application and the quality and coverage of maps.
6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
You can use digital maps interactively: you can zoom in and out (increase or decrease the scale), you can tilt them up and down, and rotate them left and right. In GPS-supported navigation, digital maps facilitate route planning. North-up map orientation In North-up mode the map is rotated so its top always faces North. This is the orientation for example in Find on Map. Road Safety Camera Special alert points for speed, red light or bus lane cameras. Different data sources are available.
7 End User License Agreement 1 The contracting parties 1.1 This Agreement has been entered into by and between NNG Software Developing and Commercial Ltd. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the end user (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the products specified in this Agreement, including software products, databases and content .
4.5. Your rights under this Agreement will terminate immediately without notice from Licensor if you materially breach it or take any action in derogation of Licensor's and/or its licensors' rights to the Software Product. Licensor may terminate this Agreement if any Software Product becomes, or in Licensor's reasonable opinion likely to become, the subject of a claim of intellectual property infringement or trade secret misappropriation.
7.1.6 to modify, extend, transform the Software Product (in whole or in part), to separate it into parts, combine it with other products, install it in other products, utilize it in other products, not even for the purpose of achieving interoperability with other devices; 7.1.
responsibility of the User. The Licensor shall not assume any responsibility for any damages occurred in relation to use of the Software Product in a motor vehicle. 8.7 By concluding the Agreement, the User shall, in particular, acknowledge the information stated in Section 8 above. 9 Sanctions 9.1 The Licensor hereby informs the User that, if the Licensor finds its rights under the Copyright Act to be breached, the Licensor may 9.1.1 seek judicial recognition of this breach; 9.1.
by User any time from within the corresponding menu. The collected data is always anonymous, not associated in any way with any personal information of the User or with the User itself. 10.2 The collected data may be uploaded to Licensor’s database or transmitted periodically or in real time to a third party partner and used exclusively for the purpose of enhancing and improving the precision and reliability of features and services of the Software Product and the Databases.
subscription service), User shall be entitled to a refund proportionate to the term remaining from such definite term from the time of the discontinuation. 11.8. Community Services. Some Online Content Services may be based on data and information uploaded by participating individuals (Users or other persons) or a Database created and maintained by a group of such individuals.
8 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Clarion. © 2013 - Clarion © 2006 – 2013 TomTom. All rights reserved.
