User Guide

User’s Guide
32
Clock
This option sets the time on the clock that appears
on the default display based on your chosen format,
the time zone, and daylight savings time.
Format: determines the style of display: 12 Hour
(default) or 24 Hour.
Time Zone: selects the time zone based on
Greenwich Mean Time (GMT).
DST (Daylight Savings Time): indicates whether
daylight savings time is observed in your
current location or not. Your settings are:
DST Observed or DST Not Observed.
Alarm Clock
This option turns the Plug and Play receiver on at a
specific time. Press any button on the front panel.
When the unit turns on it plays the channel you
selected last.
Set Alarm: provides the settings: Alarm On or Alarm
Off (default).
When the alarm is on, the time appears on
the default display in reverse image.
Alarm time: sets the alarm time. Press the
Category buttons to increase or decrease
the hours. AM and PM switch
automatically.
Turn the Encoder knob to set the minutes.
Clockwise increases the minutes and
counterclockwise decreases them.
Press the Encoder knob to accept the
selected time (or press MENU to cancel).
Program Alert
This feature allows you to program the unit to switch
to a specific channel at a specific time. The top line
of the display shows: Set Program Alert.
Clarion_SIRIUS_PnP_Shuttle_Users_Guide.book Page 32 Thursday, February 3, 2005 7:42 PM