Owner's Manual

3. INSTALLATION
-"'-
/,I~~~_lnternal
l( micro-
~
phone
r Q
..: .. ]
2.5mm ~""
External
microphone
(Optional)
RCA-R
(Red jack)
LC Box (with fuse)
ITo car stereo AUX-IN
I
1" 1"
Red jack
•
RCA-L
(White
_!II
jack)
II '''-
l'::.':.'=.':.~~~~~~~..o:..;_;_.;_.,,===~
_In_s_ta_I_Ii_n
9
=--B_L_T_3_7_0 1
This Transceiver unit is used to receive audio signals via Bluetoot~ wireless
technology from other
Bluetoot~ device and stream it to the car audio system.
The attached cable has a pair of auxiliary output, a 12V power connector (with
LC box attached) and a TEL-INT (Telephone interrupt) pin.
RCAto3.5mm
jack cable
BluetootH" Audio/Mobile-
phone Transceiver
unit
White jack
TEL-INT.
(Brown wire)
Gnd (Black wire)
Acc
(Red wire)
Figure 1: System diagram
Instructions
1. Connect the 12V (Acc and Gnd) to car supply.
2. Connect the RCA-L and RCA-R to car stereo auxiliary (AUX) input.
Alternately, you can use the RCAto 3.5mm jack cable (included) to connect
to car stereo that supports 3.5mm AUX input.
3. Connect TEL-INT. pin to car stereo telephone mute line (if this feature is
supported).
4. Make sure that the car stereo system's telephone interrupt is ON.
BLT370 7