Owner's Manual

,
7. TROUBLESHOOTING
Problem
Cause
Description
The power of
Fuse is blown.
Replace with a fuse of
Transceiver unit does
the same amperage
not turn on
(2A) in the
LC box. If
the fuse blows again,
consult your store of
purchase.
Incorrect wiring. Consult your store of
purchase.
The red or purple LED Power-up failure
1. Power off and on the
lights up
all the time. The device may not be device until the blue
start upon power on. LED blinks correctly.
2. Press the reset button.
...
Blue LED lights up all
The Transceiver has
Power off and on the
41
the time. Transceiver malfunctioned due to device until the blue LED
.~
is not responding. some conflicts such as blinks correctly.
41
u
multiple pairing at the
l/l
c::
same time.
III
~
Cannot pair the car The BluetootH" function The Bluetooth'" function
handsfree with the in your phone is off or in your phone must be
phone car handsfree is off. set to Automatic or On.
Your
phone should be
inside the car during the
pairing procedure. The car
handsfree must
be on.
Unable to auto connect BluetootH" function is is The BluetootH" function in
with phone upon power disabled in your phone.
your phone must
be set to
up
Automatic or ON.
Multiple re-connection
Turn on multiple re-
mode is off. The auto connection mode and
connection may not be restart the Transceiver.
successful
if there is no
Manually reconnect via
BluetootH" link detection
for the first and only one
your phone.
re-connection attempt.
BLT370 25
I