Owner's Manual

5. OPERATIONS FOR BLUETOOTH
e
AUDIOIMOBILE-
eHONE TRANSCEIVER U~·:LbT!.- __
_ B_a_s_ic_o.....;p_e_r_a_t_io_n_s 1
• Turning on the power
The unit turns on immediately when power is supplied. It can only be turned
off if car engine is off.
• Resetting the Transceiver unit
This function is used to restore to factory default setting and clear all the
pairing information.
1. Press the [RESET] button once to perform reset function.
Notes:
Transceiver will remain as power on state.
The previously-connected device(s) may
still hold the Transceiver information. Thus
if the device initiate a
Bluetooth" connection when the Transceiver is in pairing
mode, the connection may
be successful.
• Activating Bluetooth"' Transceiver pairing mode
1. Turn on the Transceiver by powering up the car audio system, note that
the Red
LED blinks once every 5 seconds to confirm that the power is on.
2. Press and hold the [, ...... ] and [~~I] buttons simultaneously for 2 seconds
or longer to activate
Bluetoot~ pairing mode.
Note:
If no device is paired to the Transceiver after 3 minutes, pairing mode will be
cancelled.
For more information on
Bluetootff pairing, please see chapter "Pairing
Sequence" on page 11.
BLT370 17