Owner's Manual

4. INTRODUCTION TO BLUETOOTH
e
"PAIRING"
Automatic Connection
The Bluetoottfwireless function in your phone has to be turned on to establish
automatic connection.
1. The Transceiver will establish an automatic connection in the following
situations:
• After a previously successful connection, and the Transceiver
is switched
on again, it will automatically try to re-connect with the last paired mobile
phone (Depends
on multiple re-connection mode). Connection may take
up to a minute depending on the mobile phone.
• Some mobile phones will require user confirmation for
Bluetooth@
connection. In such case, user will need to acknowledge the connection
on the mobile phone before the connection
is re-established.
I
2. The Transceiver will not establish an automatic connection or fail to connect
in the following situations:
• If the mobile phone already has connection with other
handsfreel
headset
•
If the paired mobile phone is powered off and on (depends on mobile
phone)
•
If the paired mobile phone is out of range
• If the paired mobile phone is powered on after the Transceiver is turned
on where multiple re-connection mode set to off.
In such cases, the user will need to manually re-connect to the Transceiver
through the mobile phone.
Note:
• If the Transceiver is switched off, some mobile phones may take a long time to
detect the disconnection.
BLT370 13