Owner's Manual

4. INTAODtJCl'10N TO' BLUETOOTH
e
"''PAIRING"
Pairing Sequence
Note:
• Please refer
to Clarion Bluetootlf' Audio Transmitter and Cradle for iPod owner's
manual for the
Bluetootlf' Audio Transmitter operation below.
Between Bluetooth" Audio/Mobile-phone Transceiver and
Bluetooth" Audio Transmitter
1. Make sure the Transmitter is connected to an audio source.
2. Make sure the car stereo source mode is switched to 'AUX' mode.
3. Set the Transceiver unit in pairing mode. Please refer "Activating Bluetoottf
Transceiver pairing mode" on page 17.
4. Set the Transmitter unit in pairing mode.
5. Music starts automatically upon successful pairing.
Notes:
•
You do not have to enter a dedicated pin code for pairing these two devices, as
you do with a mobile phone.
• During pairing mode, the Transceiver unit should show a slower alternate redlblue
LED. Make sure that the Transmitter and Transceiver are not paired to any other
Transceiver or Transmitter respectively.
• Please refer "Understanding The Transceiver
Unit Indicators" on page 16 for
further details.
I
BLT370 11