Marine Radio User Manual

BLT370

Using Handsfree with

Bluetooth

Wireless Technology

Note: The Clarion car stereo must activate the telephone interrupt mode to be able

to work with the Transceiver. Please refer the car stereo owner’s manual of each

model for details.

Making a call

• Calling with the phone’s keypad

1. Using the phone keypad, dial the phone number.

2. Press the phone “SEND” key - the phone is now connected to the

Transceiver and your car stereo system will be muted. Talk as normal

to the Transceiver unit, the voice of the person you’re talking to will be

heard through your car speaker.

Incoming call

A ringing tone will be heard. The red and blue LED will alternate blink quickly.

Any music streaming will be temporary muted until a call is ended or rejected.

• Answering a call

Whenever your car stereo is operating, the Transceiver unit is in standby mode

awaiting the next call, when an incoming call arrives, the car stereo is muted

automatically and the ring tone is reproduced through your car’s speaker.

1. Press the

[

]

button once to answer the call and speak as normal.

You may also answer the call by using your phone’s answer keypad. In

this case, you can transfer the call to the Transceiver by following the

instruction in the section “Transferring a call” on page 22. However, some

phones will require user to activate transfer call via the phone itself in this

case.

Note:

• The Clarion car stereo must activate the telephone interrupt mode to be able to

work with the Transceiver. Please refer the car stereo owner’s manual of each model

for details. Make sure that your mobile phone has set the Transceiver as the default

headset/handsfree. Please refer your mobile phone owner’s manual for the

relevant setting.

5. OPERATIONS FOR

BLUETOOTH

AUDIO/MOBILE-

PHONE TRANSCEIVER UNIT