Owner`s manual

10 HX-D1
Changing the reception area
This unit is initially set to USA frequency inter-
vals of 10 kHz for AM and 200 kHz for FM. When
using it outside the USA, the frequency recep-
tion range can be switched to the intervals be-
low.
● Setting the reception area
1. Press [BAND] button and select the desired
radio band (FM or AM).
2. While pressing [DISP] button, each time you
press and hold the number “6” of the [DIRECT]
buttons for 2 seconds or longer, the reception
area switches from inside the USA to outside
the USA or from outside the USA to inside
the USA.
∗ Any station preset memories are lost when the
reception area is changed.
Listening to the radio
1. Press
[
FUNC
]
button and select the radio
mode. The frequency is displayed.
2. Press
[
BAND
]
button and select the radio band.
Each time the button is pressed, the radio re-
ception band changes in the following order:
FM1(F1) ➜ FM2(F2) ➜ FM3(F3) ➜ AM ➜
FM1...
3. Press the
[a]
button or
[d]
button to tune in
the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press
[
BAND
]
button and select the desired
band. (FM or AM)
∗ If “MANU” is lit in the display, press and hold
BAND button for 1 second or longer. “MANU”
in the display goes off and seek tuning is now
available.
2. Press the
[a]
button or
[d]
button to auto-
matically seek a station.
When the
[d]
button is pressed, the station
is sought in the direction of higher frequen-
cies; if the
[a]
button is pressed, the station
is sought in the direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
Basic Operations
Disc title (during CD Text or MD play)
Artist name (during CD Text play)
Track title (during CD Text or MD play)
Switching the title display
During CD play in the CD mode, normal CD or
CD Text play in the CD changer mode, and MD
play in the MD mode or MD changer mode, a
disc title or song (track) title, etc. previously reg-
istered in a disc can be shown in the display of
this unit.
While a title is being shown in the display, press
and hold the [DISP] button for 2 seconds or
longer.
Each time the [DISP] button is pressed, the dis-
play switches in the following order:
∗ If no title has not been set, the following indica-
tions are shown in the display.
• When a normal CD is played on a CD changer
compatible with CD Text
Disc title : “DNO-TEXT”
Artist name: “ANO-TEXT”
Track title : “TNO-TEXT”
• When an MD with no title set is played
Disc title : “DNO-TTL”
Track title : “TNO-TTL”
Scrolling a title
Press the [BAND] button for 2 seconds or longer
while a title is shown in the display.
The title scrolls to the left.
∗ After the end of the title is shown, the first 8 char-
acters are shown again.
Radio Operations