Owner’s manual HX-D1 AM/FM CD PLAYER WITH CD/MD CHANGER CONTROL
Thank you for purchasing the Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer and MD changer connected via the CeNET cable.
7. TROUBLESHOOTING Handling Compact Discs 2. PRECAUTIONS Use only compact discs bearing the Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Press the reset button for about 2 seconds with a thin rod.
3. CONTROLS 4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Source unit Names of the buttons and their functions [BASS] knob [BASS] knob [BAND] button • Adjusts the bass and treble. • Switches the band, or seek tuning or manual tuning while in the radio mode. • Plays a first track while in the CD mode or CD/ MD changer mode. • Press the button for 2 seconds or longer. Scrolls a CD or MD title.
Display Items : CD changer indicator : CD changer number indicator : MD changer indicator : Manual indicator Lights in the manual tuning mode. : Stereo indicator Lights when an FM stereo broadcast is received. : Lights in the disc scan, disc repeat and disc random mode. : Lights in the scan play mode. : Lights in the repeat play mode. : Lights in the random play mode.
5. OPERATIONS Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). About the system check function Selecting a mode The CeNET system used in this unit adopts the system check function. The system check indications are shown in the following cases. Only when wiring connections have been made and the power is turned on the first time, this function checks the pieces of equipment connected.
Basic Operations ●To adjust the treble 1. After having let the knob come out in step 1, pull it out further with your fingers. 2. Rotating the [BASS] knob clockwise enhances the treble; rotating it counterclockwise attenuates the treble. ∗ When setting to the center position, the knob is clicked in position. Notes: • When pulling out the knob, you feel a little difficult to do it. • Pull out the knob gently. Pulling out the knob strongly let it be removed from the unit.
Basic Operations Radio Operations Switching the title display Changing the reception area During CD play in the CD mode, normal CD or CD Text play in the CD changer mode, and MD play in the MD mode or MD changer mode, a disc title or song (track) title, etc. previously registered in a disc can be shown in the display of this unit. While a title is being shown in the display, press and hold the [DISP] button for 2 seconds or longer.
Radio Operations When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Press [BAND] button and select the desired band (FM or AM). ∗ If “MANU” is not lit in the display, press and hold [BAND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available. 2. Tune into a station. ● Quick tuning: Press and hold the [a] button or [d] button for 1 second or longer to tune in a station.
CD Operations Loading a CD Top function Insert a CD into the centre of the insertion slot with the label side facing up. The CD plays automatically after loading. Notes: • Never insert foreign objects into the CD insertion slot. • If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. • Discs not bearing the mark or and CD-ROMs cannot be played by this unit. • Some CDs recorded in CD-R mode may not be usable.
6. OPERATIONS OF ACCESSORIES CD/MD Changer Operations CD(MD) changer functions When an optional CD(MD) changer is connected through the CeNET cable, this unit controls all CD(MD) changer functions. This unit can control a total of 2 changers (MD and/or CD). Press [FUNC] button and select the CD(MD) changer mode to start play. If 2 CD(MD) changers are connected, press [FUNC] button to select the CD (MD) changer for play. ∗ If “NO MAGAZINE” appears in the display, insert the magazine into the CD changer.
CD/MD Changer Operations ● Fast-backward Press and hold the [ longer. Repeat play ] button for 1 second or Top function The top function plays from the first track (track No. 1) of the disc. ● When playing a disc 1 to 6 Press [DIRECT] button(1 to 6) with the same number as the CD(MD) playing. ● When playing a disc 7 to 12 (only when a 12 disc CD changer is used.) Press and hold for 1 second or longer [DIRECT] button(7 to 12) with the same number as the CD playing.
3. CONTROLS 4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Source unit Names of the buttons and their functions [BASS] knob [BASS] knob [BAND] button • Adjusts the bass and treble. • Switches the band, or seek tuning or manual tuning while in the radio mode. • Plays a first track while in the CD mode or CD/ MD changer mode. • Press the button for 2 seconds or longer. Scrolls a CD or MD title.
7. TROUBLESHOOTING Handling Compact Discs 2. PRECAUTIONS Use only compact discs bearing the Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Press the reset button for about 2 seconds with a thin rod.
8. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. MD changer CD changer CD Error Display Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc.
9. SPECIFICATIONS CD Player System: Compact disc digital audio system Usable Discs: Compact disc Frequency Response (±0.5dB): 5 Hz to 20 kHz Signal to Noise Ratio (1 kHz): 110 dB Dynamic Range (1 kHz): 100 dB Harmonic Distortion: 0.005% FM Tuner Frequency Range: 87.9 MHz to 107.
