User guide

F-3
3.
Check the box Enable infrared communication on…. and Enable
software install for Plug and Play devices in range.
4.
Click Apply then return to the Status tab to see connectivity taking place.
Your portable computer is now configured and ready for use with the
Clarinet EthIR Beam. Point the EthIR Beam towards your notebook’s
infrared port. With the infrared drivers now loaded, Windows 95
recognizes the Clarinet EthIR Switch as the new hardware device.
Windows 95 starts the
Plug-and-Play installation process by installing the
Microsoft IrDA LAN Driver and Microsoft IrDA LAN Adapter for
your notebook. At this point you may be prompted to insert the Windows
95 CD-ROM to continue the installation process. Follow the prompts until
the installation is complete. You will see the
Infrared Monitor screen
indicating successful IrLAN connection. See Chapter 2 for information on
positioning your notebook computer with the EthIR Beam.
Click Options
Check Enable
infrared
Communication and
Enable software
install for Plug and
Play devices