User's Manual

ClarIDy UHF USB Reader Demo Program
33/40 © Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
3.6 Filter Write Read
Click the “Filter Write/Read” button of the main form, as figure 38. The “Filter Write/Read”
panel is used to read and write tag. The user may select to read and write by filter value. If the
user selects “NONE” from the rule combo box, the reader will read or write one of cards. If the
user selects “NOT EQUAL” from the rule combo box, the reader will read or write one of cards
which is not match filter value. If the user selects “EQUAL” from the rule combo box, the
reader will read or write one of cards which is match filter value.
Follow the instructions step by step as following:
1. Select “Rule”
2. Select start location of filter value
3. Input filter value
4. Select “Memory Bank”
5. Click the “Read” button or “Write button.”
Figure 38: Filter Write/Read Control