User's Manual

ClarIDy UHF USB Reader Demo Program

Figure 19: Setting View Panel

As you can see in Figure 20, the settings page has a two column layout. The left column

is used to specify the startup settings that will be automatically applied to the reader when the

application starts. The right column allows the user to change the current reader configuration.

Figure 20: Settings

1. Link Profile: Sets the current link profile for the reader module, as figure 21. The option

is as follows:

0: DSB ASK / MO / 40 khz

1: DSB_ASK / M1 / 160 khz

2: PR_ASK / M2 / 25U khz

3: PR_ASK / M2 / 300 khz

4: DSB_ASK / MO / 400 khz

5: PR_ASK / M1 / 250 khz

Figure 21

2. Data Format: Sets the operation response data reporting mode for tag-protocol

operations, as figure 22. The option is as follows:

COMPACT: The response data is limited to provide the application with the pertinent

tag-access operation data, but minimize the amount of MAC-to-host

communication overhead.

NORMAL: The response data builds on the compact mode to provide the

application with status and contextual information to give additional

finer-grained feedback such as the beginning of inventory cycles, etc.

EXTENDED: The response data builds on the normal mode by providing additional