User's Manual

ClarIDy UHF USB Reader Demo Program for WinCE
23/28 © Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
3.5 Lock/Kill Control
Click the “Lock/Kill” page of the main form, as figure 22. The “Lock/Kill” panel is used to
Lock tag data and Kill tag.
Figure 22
Follow the instructions step by step as following:
1. Click “FilterConfig” button.
2. Select “Rule”
3. Select start location of filter value
4. Select “Mask Memory Bank”
5. Input “Mask Data”
6. Click the “OK” button, as Figure 23”
7. Input “AccessPWD” and KillPWD”. But if you want to lock the tag, please input
“AccessPWD”
8. If you want to kill or lock the tag, please select “OK”, as Figure 24.
9. The kill and lock function would not be change permanently, please confirm again as
figure 25.