User's Manual

ClarIDy UHF USB Reader Demo Program for Linux
23/28 © Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
Figure 23 Filter Write
3.2.7 Lock Tag
Follow the instructions step by step as following:
1. Place the RFID tag in the RF field of the ClarIDy UHF RFID Reader.
2. Selects "7: Lock Tag" , the system shows the input dialogs:
“Mask bank”, “Mask start”, “Mask Length”, “Mask data” and “match or unmatched”.
3. Select “KillPassword”,” AccessPassword”, “EPC Memory Bank”, “TID Memory Bank”
and “User Memory Bank” state.
4. Input the AccessPassword.
5. The system will show the success or failed.
Figure 24 Set Filter Mask