User's Manual

ClarIDy UHF USB Reader Demo Program for WinCE
20/28 © Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
3.4 Read/Write Control
Click the “Write/Read” page of the main form, as figure 18. The “Write/Read” panel is
used to read and write tag. The user may select to read and write by filter value. If the user
selects “NONE” from the rule combo box, the reader will read or write one of cards. If the user
selects “NOT EQUAL” from the rule combo box, the reader will read or write one of cards
which is not match filter value. If the user selects “EQUAL” from the rule combo box, the
reader will read or write one of cards which are match filter value.
Figure 18 Read/Write Control
Follow the instructions step by step as following:
1. If you want to use filter function, then Click “FilterConfig” button, else go to step 7.
2. Select “Rule”
3. Select start location of filter value
4. Select “Mask Memory Bank”
5. Input “Mask Data”
6. Click the “OK” button”, as Figure 19.