User's Manual

ClarIDy UHF USB Reader Demo Program for Linux

3.2.1 Inventory

Inventory step by step as the following instructions:

1. When the user select "1: Inventory" then showed the "Input interval time (second)", as

figure 16.

2. Input interval time.

3. Place the RFID tag in the RF field of the ClarIDy UHF RFID Reader.

4. The PC (“PC”), EPC (EPC), CRC16 (CRC), number of reads (“Count”), and Receive

Signal Strength Indicator (“RSSI”) will be shown on the table, as figure 16.

Note :

interval time: Runs out the Inventory total time.

Figure 16

Inventory

3.2.2 Read

The Read page allows the user to configure the following items:

1. Read EPC (as figure 17): Read Tag EPC Data.