User's Manual

ClarIDy UHF USB Reader Demo Program for Linux
10/28 © Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
Figure 7 Set to Data Format
3. Operation Mode: Sets the reader's operation mode, as figure 8. The option is as
follows:
0: CONTINUOUS: In continuous mode, when a tag-protocol-operation cycle (i.e., one
iteration through all enabled antenna ports) has completed, the reader module
will begin a new tag-protocol-operation cycle with the first enabled antenna port
and will continue to do so until the operation is explicitly cancelled by the
application.
1: NONCONTINUOUS: In non-continuous mode, only a single tag-protocol-operation
cycle is executed upon the reader module.