User's Manual

ClarIDy UHF USB Reader Demo Program
34/40 © Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
3.7 Lock/Kill Tag
Click the “Lock/Kill” page of the main form, as figure 39. The “Lock/Kill” panel is used to
Lock tag data and Kill tag.
Figure 39
Follow the instructions step by step as following:
1. Select “Mask Memory Bank”
2. Select “Rule”
3. Select start location of filter value
4. Input “Filter Value”
5. If you want to lock the tag, please select state (Access PWD, Kill PWD, EPC Bank, TID
Bank, User Bank) and input “AccessPWD”. And if you want to kill the tag, please input
“AccessPWD” and KillPWD”.
6. If you want to kill or lock the tag, please select “OK”, as Figure 40.