User's Manual

ClarIDy UHF USB Reader Demo Program
31/40 © Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
3.5 Filter Inventory
Click the “Filter Inventory” button of the main form, as figure 36. The “Filter Inventory”
panel is used to read tag UID. The user may select to read tag UID by filter value. If the user
selects “NONE” from the rule combo box, the reader will read all cards. If the user selects
“NOT EQUAL” from the rule combo box, the reader will read card which is not match filter
value. If the user selects “EQUAL” from the rule combo box, the reader will read card which is
match filter value.
Follow the instructions step by step as following:
1. Select “Rule”
2. Select start location of filter value
3. Input filter value
4. Select “Memory Bank”
5. Click the “Start” button, the result as figure 37.
Figure 36: Filter Inventory Control