User's Manual

IDSmart UHF Security Gate User Manual
© Copyright 2014 ClarIDy Solutions, Inc. All rights reserved. 30/40
security gate detection. One of the key successful factors of UHF RFID equipment deployment
is environment. This tool provides a way to easily perform on site tuning with portable computer
such as Notebook.
6.1. Prerequisite of using the UHF Reader Tool
Before using the tool, install the tool to the computer according to the instructions
described in section 1.5. Installation of the UHF Security Gate Tools.
The computer Ethernet interface configuration will need to be changed to ensure the
computer residing on the same network as the UHF RFID reader. The reader has a static IP
address of 192.168.25.203 and subnet mask of 255.255.255.0. As a result, the IP address of
the computer should be set to 192.168.25.X (except 192.168.25.0 and 192.168.25.203) with
the same subnet mask. The following example set the computer IP address to 192.168.25.21
6.2. Connecting to the UHF RFID Reader
Double click "Claridy UHF Security Gate Tools" shortcut on the desktop and double click
the "UHF Reader Tool" shortcut to run the tool.
An initial search dialog is presented when the program is executed. Click "Search" button
to discover the reader. Since the UHF RFID reader and the computer are allocated to the same
network, the discovery process is pretty straight forward.