User's Manual

IDSmart UHF Security Gate User Manual

Upon completing the installation process, the system creates a shortcut named "UHF

Security Gate Tools" on the desktop.

The tools installed are WinSCP, Putty and UHF Reader Tool. These tools are used to

access the equipment in the upcoming section of the user manual.

Alternatively, users could also install their choice of ssh client or obtain tool pack that

doesn’t required installation from technical support.

1.6. SAFETY NOTES

The equipment can only be operated at the stated supply voltage. If the supply voltage is

too high, there is a risk of fire.

Always turn off power before performing any maintenance activities or touching any interior

part and exterior connection cables of the equipment. Failure to do so might lead to injuries.

There is a risk of health.

Appropriate means are provided to dissipate the heat generated within this equipment. The

equipment must however not be installed in a cabinet or on shelves with insufficient ventilation..

There is a risk of fire.

Protect the equipment from moisture, dripping water and spraying water. The equipment

must not be placed close to sources of heat, exposed to direct sunlight or operated in a damp

environment. The equipment may only be operated in the condition stated in the specification.