User's Manual

ClareOne 73
Quick reference
The following information on the ClareOne panel is provided in quick reference
form for user convenience.
Table 5: Quick reference
Feature
Quick reference info
Exit Delay
Exit Delay is the time in seconds that the panel waits if an alarm is
triggered before sending a transmission to the security central station.
This feature can be found and modified in Security & Arming
(Settings > Installer Settings > Security & Arming). Edit exit delay on
each entry zone by tapping the pencil icon next to each entry zone.
Exit Time Restart
The Exit Time Restart feature allows the panel user time to correct any
accidental zone openings during the alarm process. Exit time is
automatically restarted if an entry zone is opened and closed 2 times
during the exit delay. If the zone is still open when the exit delay
expires, a zone alarm is triggered, and then the entry delay is initiated.
If the panel is not disarmed during the abort window, an alarm is sent
to the central station.
Auto Armed Stay
This setting enabled/disables the ignore armed stay defaults. When
this feature is enabled, armed away sets to arm stay if there is no
egress (exit via an entry zone).
This feature can be found and modified in Security & Arming
(Settings > Installer Settings > Security & Arming).
Entry Delay
Entry Delay is the time in seconds that the panel waits when an alarm
is triggered for the panel to be disarmed before sending a transmission
to the security central station.
This feature can be found and modified in Sensor Management
(Settings > Installer Settings > Sensor Management). Edit entry delay
on each entry zone by tapping the pencil icon next to each entry zone.
Progress
Annunciation (enter)
An audible alert is provided upon entering the premises through an
entry zone while the panel is armed. The panel must be disarmed
within the entry delay window or the alarm is sent to the central station.
System
Acknowledgement
The ClareOne security widget/icon must be added to the ClareHome
app’s Favorites/Home page in order to view ClareOne alarm panel
status. Refer to the ClareHome App Guide (DOC ID 1750) for
additional information.
Remote Arming
The ClareOne security widget/icon must be added to the ClareHome
app’s Favorites/Home page in order to remotely arm the ClareOne
security panel. Refer to the ClareHome App Guide (DOC ID 1750) for
additional information.
Transmission Delay
The time in seconds that the panel waits when an alarm is triggered
before sending a transmission to the security central station.
This feature can be found and modified in Security & Arming
(Settings > Installer Settings > Security & Arming).