User's Manual

52 ClareOne
Restart
The Restart button allows the user/installer to restart the ClareOne panel.
Note: During the restart, the panel is not functional. Alarms and sensors are not
active.
Figure 26: Restart
To restart the panel:
1. Tap Settings, and then tap User Settings/Installer Settings.
2. Enter the Master/Installer PIN, and then tap Restart.
Confirm by tapping Restart Now.
System Test
The System Test page allows the user/installer access to test different functions
of the panel to help identify and correct problems. Run tests to verify that the
panel is functioning correctly after final panel installation.
Notes
• The panel should be tested after installation as well as weekly to ensure
proper function.
• When testing the panel, verify that the panel is powered by battery only.
Unplug the panel from the wall outlet, and then perform the desired tests.
• Smoke detectors should always be checked monthly and after an alarm.