User's Manual

ClareOne 43
To set the panel to AP Mode:
AP Mode allows the user to set their panel in AP mode to use the Clare Controls
Install Assist app. Once turned on, the user sees the panel’s broadcasted
network and a randomized passcode.
Note: This passcode is random at each generation.
1. Tap Settings, and then tap User Settings/Installer Settings.
2. Enter the Master/Installer PIN, and then tap WiFi.
3. Tap AP Mode, and then tap ON.
The panel is now in Ap mode.
4. Tap Off to exit AP mode and reconnect to the Local Area Network.
Time Zone
The Time Zone page allows the user/installer access to select/change the time
zone.
Figure 23: Time Zone