User's Manual

ClareOne 33
Display settings
Display Timeout: This setting allows the user to adjust the length of time before
the screen times out.
Screen Cleaning: This setting allows the user 1 minute to clean the panel’s
screen. During this time, the screen is not touch sensitive.
Temperature Mode: This setting allows the user to select Fahrenheit or Celsius
for their thermostat display.
Auto Wake: This setting allows the user to use the panel’s PIR sensor to “wake”
the panel from a time out. When set to Off, the panel does not “wake” when it
senses motion.
User Settings
The User Settings page hosts a sub menu of user settings.
Note: The Master PIN is required to access User Settings.
Figure 16: User Settings
For full User Settings, see User and Installer Settings on page 35.